Ruike and Böker are made by Sanrenmu and Ruike belong to Fenix (Fenix desing a line of multitool and knife and the manufacture was made by sanrenmu). Nice tool.
These are a really great alternative for the SAK Hercules. It's great that it's held together with torx bolts instead of rivets. The quality seems pretty good !
This is definitely a decent alternative to any Victorinox 111 mm with a similar tool layout.. The positives are the lack of those fragile springs regarding the operation of the pliers and scissors, full size tweezers, OHO main blade, G10 scales and pocket clip just to recap.. Plus I like how they use stainless steel for the liners, not aluminum.. Sure it's heavier, but more robust. Just try holding it up to any light source and see if it "leaks light" between the liners on the springs. I'm sold, gonna pick one up for office sheeple friendly EDC.. Great review, bravo!
@@inkiron3907 You'll notice with almost 99% accuracy, that all post 1990 Victorinox knives, "leak light" when held up against a light source, be it 91 or 111mm.. Now here's the interesting observation, Victorinox leak, original Wenger knives don't... That's why I only EDC pre 1990 Wenger & Victorinox knives.. Better, construction, QC, plus solid cellidor scales.. Solid cellidor can take quite a beating, unlike the 90% hollowed out versions currently do..
🙀This is a interesting multi tool at 10:15 I've saw someone useing that tool on a Tec tool as a driver and the guy allmost had has finger off so be aware of using it as a driver😫 but you already have same fantastic drivers on it anyway so i would just use it as a cuting blade I'm going to be on the look out to see what saw and ✂✂ is better it's a interesting tool thanks for sharing the video with us 😺👍
Yes, it seems a very unsafe driver position! I used the saw the other day and it works well, but I’ll need at side-by-side for a real ranking. Thanks for watching 😎
There are locking Victorinoxes and they're great, just like all Victorinoxes. They're also a lot less bulky than the Ruike. I definitely would pick a Vic over this brick.
Boker i both their Magnum model and when I try to mail and shipt knife whic broke and nobody didn't contact me. Newer again Magnum ANd Boker are big no for me. Also I m from EU and o cudent do anything
Totalmente correcto lo que comenta @Josebkack. Tu dices que no tiene bloqueo, cuando se ve claramente que si. Por favor, documéntate un poco antes de hablar. Puedes llevar a equívocos a personas que ven tus vídeos.
Ruike and Böker are made by Sanrenmu and Ruike belong to Fenix (Fenix desing a line of multitool and knife and the manufacture was made by sanrenmu). Nice tool.
Thanks for clarifying! It’s always interesting to learn about the OEMs
These are a really great alternative for the SAK Hercules. It's great that it's held together with torx bolts instead of rivets. The quality seems pretty good !
This is definitely a decent alternative to any Victorinox 111 mm with a similar tool layout.. The positives are the lack of those fragile springs regarding the operation of the pliers and scissors, full size tweezers, OHO main blade, G10 scales and pocket clip just to recap.. Plus I like how they use stainless steel for the liners, not aluminum.. Sure it's heavier, but more robust. Just try holding it up to any light source and see if it "leaks light" between the liners on the springs. I'm sold, gonna pick one up for office sheeple friendly EDC.. Great review, bravo!
Thanks! I’ll check the “light leak” because I’ve never thought to do that on my tools before
@@inkiron3907 You'll notice with almost 99% accuracy, that all post 1990 Victorinox knives, "leak light" when held up against a light source, be it 91 or 111mm.. Now here's the interesting observation, Victorinox leak, original Wenger knives don't... That's why I only EDC pre 1990 Wenger & Victorinox knives.. Better, construction, QC, plus solid cellidor scales.. Solid cellidor can take quite a beating, unlike the 90% hollowed out versions currently do..
Thanks for this video, 🤝.
Multi tool - 👍.
Good luck.
الاداة رائعة وقد اشتريت واحده .. شكرا لك ياصديقي على هذا الفيديو المميز ...اتمنى لك حياة طيبة
🙀This is a interesting multi tool at 10:15 I've saw someone useing that tool on a Tec tool as a driver and the guy allmost had has finger off so be aware of using it as a driver😫 but you already have same fantastic drivers on it anyway so i would just use it as a cuting blade I'm going to be on the look out to see what saw and ✂✂ is better it's a interesting tool thanks for sharing the video with us 😺👍
Yes, it seems a very unsafe driver position! I used the saw the other day and it works well, but I’ll need at side-by-side for a real ranking. Thanks for watching 😎
13:30 those tweezers are probably the best part about this tool for me
They are the best tuck-away style tweezers I’ve seen
I like mine just wish it had a file like the M61
Why doesn't swiza have more tools for options. They charge enough. What's their biggest model I'm curious?
Theres a Hidden Lanyard Ring which also use a spring
imagine böker in solingen making a multitool, would cost like 300 bucks and weigh a ton, but would be quite nice#:P
It’s time for a cast iron Multitool. C’mon Böker 😂
Nice review. Didn't catch the price though.
Around $75
Hi, will the Victorinox corkscrew screwdriver fit on the Ruike?
It does not! The corkscrews are just slightly different enough to prevent the micro screwdriver fit 😭 so close
@@inkiron3907 that's unfortunate! Thanks for the reply. 😀
There are locking Victorinoxes and they're great, just like all Victorinoxes. They're also a lot less bulky than the Ruike. I definitely would pick a Vic over this brick.
Boker i both their Magnum model and when I try to mail and shipt knife whic broke and nobody didn't contact me. Newer again Magnum ANd Boker are big no for me. Also I m from EU and o cudent do anything
7:55 that seems like a major design issue
No folding scissors are designed for cutting heavy materials IMO, so we’ll see how they truly perform in the upcoming scissors showdown video
The serrated blade is for seat belts.
The wire stripper discolouration was probably factory testing. Chinese wire is notoriously bad quality.
Totalmente correcto lo que comenta @Josebkack.
Tu dices que no tiene bloqueo, cuando se ve claramente que si.
Por favor, documéntate un poco antes de hablar. Puedes llevar a equívocos a personas que ven tus vídeos.
No can opener for such a big tool. Big fail.
People discount the can opener, but it does a job nothing else will do well. Whereas a bottle can easily be opened with a bunch of things.
I know many use a can opener, but I have never used one and it adds no value for me personally. Similarly with a saw, just not something I need.