I just had my quartz coutertops installed, this information is SO useful, thank you! The one thing that I never thought of was testing the draws before the counter guys left, my draws don't open! I had a moment and cried, this has been a long process and I was so excited to see them in place I never thought to test that. I just thought I would put this information out to the world for others to monitor before their counter people leave 🙂.
It can be a draining experience at times, but I hope yours is, ultimately, a rewarding one. Forgive me if I am incorrectly picturing your issue. If they are a reputable company who cares about such reputation, they will be willing to address the issue -- if it can be, and there is almost always an option that might be accepable, albeit, a modification of your original vision. If there is a special overhang/enlarged edge that blocks your cabinet doors, and you are willing to change the look you wanted, they could modify/replace the countertop with a thinner edge. Some companies will do this at no extra cost, or definitely at reduced cost -- because something like that should've been noticed by experienced installers. This is most true if you, yourself, noticed it soon and told them shortly after the install. Or, they should be willing to work with you by temprarilly removing the counterop until a raised wood base is attached and seemlessly blended into your existing cabinet framing. Then the countertop can be reinstalled, now just slightly higher to avoid blocking the doors. If all that is too costly [or if backsplashes have now been installed and countertop removal would cause cistly damage to it, there are companies that will make new drawer and door fronts [or a handy-person might even just slightly down-recenter the exiting fronts] to eliminate the blocking.
Case in point, my new granite countertops were installed with choseled edges. I didn't have time to fully look over things -- certain things take a while to notice after the excitement and newness of the install happens. Plus. I had to get back to my job. It wasn't until two says later that I had a good hour to look things over in the daylight. I noticed unacceptable areas of the chiseled edges -- significant [i.e., most] of the edging. Although I signed their "good-n-happy" appproval sheet before the installers left -- the company was honest enough to come back and look it over. Even though they refused to acknowledge thatvtheir claimed "chiseled edges" weren't [the edges looked like smooth waves], they ultimately removed the countertops and gave me a full refund. Granted, they knew my personality [and couldn't claim I misunderstood reality -- before going with them,I showed them pictures of the type of chisel I wanted and they agreed]. They knew that I would take further steps until rectified. They did the removal and refunded me [albeit, a month later] -- but not without the salesperson saying, as she left my house the kast time, "Good luck finding someone who will give you what you want." I did, the very next day. This company had far more experience with all types of edges, and gave me a beatiful, TRUE, chiseled edge. Bweare of the many "boutique " countertop sellers. It is time consuming, but find shops that have examples, and also are willing [as my second-and-better choice] to actually do a small text cut to show ypu ahead of time and ask if is acceptable before doing the whole thing. Oh, and this second company checked the clearance of the drawers and doors before bonding the slab to the framing.
This is one of the best presentations I've ever seen. Clear and concise and you have a very natural delivery. I could listen to you all day! Great work. And thanks for the great info.
I don't do this myself, but I have a relative who makes candies, chocolates, and confectionaries. Keeping the countertop warm or cold (depending on what she's making) is really helpful to the process. She complains often that she can't have this in her home and she was spoiled by the business where she learned. She has a section of marble for the cooling properties, but she'd die if she could have a heated section. I can't wait to tell her about this trick!
Thanks to the info I got from your video there are now quartz countertops in my kitchen. And they are GREAT!! And yes I made sure it was a Bretonstone quartz company. Thanks again.
This video told me everything I needed to know about quartz countertops. We just bought a brand new home that comes with quartz countertops installed. Thank you Mark
This was very valuable information! Thank you for delving into all the nooks crannies and giving us the benefit of your research. A more informed shopper is a happier shopper in the end. 👍👍
About to install quartz countertops. We were informed the 10’x2’ slabs were supposedly 190lbs by the homeowner. Yeah when me and my buddy unloaded them from the delivery truck, I’ll tell you right now they were indeed not 190 lbs. they were much much more lmao. I think they were more like 400. Only us 2 were there when the delivery guy came, and we unloaded them and that was a back breaker forsure. Unloading 4 separate 10 foot slabs with 2 guys…. Goodbye back and arms
@@MTKDofficial I hope it all goes well too, especially after watching your video on kitchen counter "don'ts". I mean, I've never seen a worse install job than that woman's whose counters didn't even touch the cabinets...jeez.
This was really comprehensive--thank you! You know what else will stain your quartz countertop? FOOD COLORING. I happen to know from kid experience. Ugh.
Mark, everything I read online says quartz has a recommended max temp of 300F/150C due to possible damage to the resin. Quite a difference between your 1300F/700C! I did learn a ton about my new quartz countertops, so thank you.
While I like the way you broke down the "things you need to know " categories, there is some misinformation in this video. 1) using the Breton method of manufacturing doesn't guarantee equivalent quality. That method combined with good raw materials is what creates quality engineered stone. 2) material thicknesses are not that thin (you referenced mm rather than cm). 3) heat resistance is not up to 700 degrees Celsius. It isn't even 700 degrees Fahrenheit. It accepts moderate heat and is susceptible to thermal shock. 4) it cannot be used outdoors...which needs to be part of the conversation...even in covered areas. Always check with the actual manufacturer of the product with regard to how to care for quartz surfaces. And finally, a brand name does not mean they actually manufacture their own product. Some "brands" are produced for a brand name but that company doesn't actually control the content/process (just color or pattern definition).
Hey. Thanks for the comment. And the insight on a few of the points I messed up. I appreciate it. While I try to research and find good info, it’s never perfect.
@@MTKDofficial you are welcome! I was lost when I first got immersed in the stone industry. There's a lot to know and technology is changing our choices rapidly. Google doesn't always have the most current information which is a challenge in all areas of design.
This is great content. Two things... If you get a permanent marker on your counter top, just get a dry-wipe marker and go over the permanent marker and it'll just wipe off. Secondly, Can you place a quartz countertop over an induction cooktop and use pans on the quartz without it cracking from the pan heat?
I've helped my son in-law install several quartz counter tops and when he does a seam it's like a science experiment with two suction cup based clamps that not only pull the two slabs together but adjust the height of each slab and when finished the seam is invisible. Unfortunately not all installers are willing to invest in the equipment needed to get to this quality.
I never knew about the wire mesh heating element for quartz countertops. We have quarts currently and in the winter it is almost too cold to work on my computer at the island. In our new home, I will have this wire mesh heat feature added ~ thank you so much!!!!
Thanks for the list of companies. Having looked at a couple places casually they all seem to have the same thing and nothing that makes me want to spend thousands of dollars. I'll use your list to research further and hopefully find something I LOVE.
Exactly the discussion I needed to hear. Thanks! If my budget worked for it, I’d probably choose quartz. The countertop in the home I just bought it laminate that is edged with wood. Dated. And has evidence of some (not as much as one would have expected with this design) but some water damage. But considering all things, I’m going with laminate. For the cost, durability, and the fact that overall I prefer the sound of setting dishes on laminate over quartz or other stone surfaces, I think laminate is what I actually want. Will it need replacing in 7-10 years. Probably. But by then I might actually be interested in a kitchen renovation anyway. I’ll use the $$ saved on adding upper cabinets above the existing cabinets that are currently topped off with crown molding about 18” lower than the ceiling.
Wonderful video. Very informative. I’m thinking about getting IKEA courts countertop. Do they supply quarts counters from manufacturers who use the Breton method?
Thanks, Mark!!! Although a few months old, I am just getting to this one! We have gone to the slab-getting place :) before but we are now ready to make final decisions and therefore this is perfect timing. Your videos are so informative and honest. THANK YOU! Wish us luck.
Fabulous! Everything I wanted to know about quartz countertops but was afraid to ask. Can you explain the pros and cons of getting a quartz countertop that includes a backsplash?
Hi there! I watched the video hoping to find out how to get water stains out of a quartz countertop as well as to find out if you can remove scratches. I have watermarks all around the faucet and i got scratches from setting a ceramic planter on the counter. The video was awesome, but didnt hit on those. Do you have any suggestions? I saw 0000 grit steel wool for the water stains? Thank you!
Be careful not to make it worse by removing the sheen from sanding. I'd even try a Mr. Clean Magic Eraser. I've seen videos on repairing surfaces, but am certainly no professional at this.
Thanks for the video! Have you used Vadara brand quartz? It has a look more like quartzite, but I didn't see the company on the list you have in the comments.
Your videos are very informative and enjoyable to watch and listen to. Thank you for the knowledge and insight, very very helpful and appreciated. Cheers from Wisconsin.
Hey Jennifer. I've added a list to the description with all the company's that use Bretonstone slabs. You would have to ask the supplier or fabricator where they buy their slabs from. If it's not on that list, it's not Bretonstone.
We have seams in our newly installed quartz. I noticed they raise up a little. Can the area be sanded down? Will it effect or dull the color in that area? Is the stamp that deep? It’s 2cm.
Great video. About the seams, our L shaped countertop does have a seam that is visible to the eye and you can feel it with your nails. We had a couple of nicks that the warranty guy easily repaired with resin beautifully. But when I asked about the seam, he checked it with his razor blade and said it was actually better than most. If I could upload a photo here, I would. Was this person honest or just lazy? Every time I clean the counter I feel that seam catching, and I do wonder how much dust etc can accumulate over time? Thanks
Hey Brian. Thanks for watching. The best way is to call the manufacturer, if you can get that information. Otherwise, I normally do a search to see if a product is manufactured using the bretonstone patent. Usually you can find some info at least. If nothing turns up, I’d be suspicious of the product. It doesn’t mean it’s not good, but it’s always nice to see some technical specs. These should be readily available in one nice location, but unfortunately not.
Thank you so much. Moving soon to my brand new home and had no idea how to care for my Quartz countertops. I have a question on the topic of stains. I’m originally from Puerto Rico and in our cooking we sometimes used Annato oil. I’m very careful when using, but sometimes accidents happen. Wondering how will that stain be taken care of. This is the kind of oil that the stain will linger for days. Only harsh chemicals will take the stain out. What is your advice.
Hi Sandy. I would be careful with harsh chemicals. Barkeepers friend is what I would recommend for quartz. Always test it out somewhere inconspicuous first. But that stuff is really great.
@Mark Tobin Kitchen Design its says right on the package for barkeepers friend "for non-stone countertops". I'd be nervous recommending it to anyone knowing this...
Hey! I want to buy honed quartz and im super worried about sealing every other months and cleaning it. I have researching online but getting mixed information. What do you recommend? Would hones quartz be trickier than polished quartz in cleaning?
Quartz does not need to be sealed, whether it's polished or honed. A honed finish just requires a little more care in cleaning. Just don't be abrasive with it. Honed finishes show more finger prints and smudges and in turn people end up cleaning it more. hope that helps.
We are looking at Quartz countertops...we are younger so we wanted it because of being able to put hot pans on surface without worrying about deforming other materials..and mostly because my wife don’t want the “cheap” look of laminate... my question is...will black quartz show fingerprints and smudges more likely..kinda like stainless steel. Debating between white or black and if either one is hard to keep clean
Quartz is a great choice! Darker colours tend to show more smudges, but particularly if they are solid colours. Like a solid black. However, the way the light reflects at certain times of day shows smudges on any colour. Quartz is easy to keep clean, definitely go with the colour that you really love! And send me a pic when it's done!
@5:41, you mention slab thickness is between two and seven mil. I assume that mil is millimeters, which isn't much more than 1/4 inch. I have seen quartz much thicker than that, so please elaborate on your thickness comment.
I test quartz here in this video - th-cam.com/video/D3PEsEXmtAE/w-d-xo.html Content correction: Hey friends, while I always do my best to provide good information, sometimes I will make mistakes or get things wrong. A couple things were pointed out to me that I wanted to correct. 1. The companies that use Bretonstone plants have the liberty of adding the aggregates they wish, to make the patterns and styles they decide. This can effect quality to a degree. 2. I mentioned mm instead of cm for thickness. 3. Quartz is heat resistant to nearly 200 deg. C. It is subject to thermo shock as well. Thank you to all who watch my videos and comment!
Hi! I find your video very useful, so thanks! We are just starting to plan our new home. Thanks also for including food safety in your presentation! I am a food safety practitioner for food manufacturing and think this topic cannot be stressed enough. 😉 A small FYI: NSF (now called NSF International) is the National Science Foundation (not “Sanitary”). Headquartered in Ann Arbor, Michigan. Go Blue!
@@janine4360 Hey thanks so much and for the correction. I appreciate it. I'd love to learn more about food safety and how it relates to the surfaces we put in our homes. If you ever would consider chatting about it please reach out at mark@mtkd.ca
Thanks for the video. What about the prefab quarts counter tops that are manufactured in china? I have seen a counter sized slab and backspash priced under $200. Can those be trusted?
I've never seen a repair kit. Reach out to a fabricator (if there's one in your area) and see what they recommend. They may also have something to offer. Just not sure.
Can you please advise me on the following. I have a suede finish quartz kitchen countertop that shows all water marks, finger prints etc. that are driving me nuts. I have located a company that says they can hone, polish and seal the countertop. Is this something that can really be done at home or am I being fed a lie.
Well, quartz can be sanded and polished. That's how they get the finish at the fabrication plant. Doing it in the home is a pretty big job. Do they say how much? I would probably want to see some examples of their work. But it is doable.
Thanks for such an informative video.. Do you happen to know the name of the quartz in the video at 10:39 (where you are talking about warranties)? Thanks!
Great information, especially about the pricing differences! You've convinced me to subscribe! 😀 You have a nice voice and demeanor about you... you remind me of Eddie Vedder from the band Pearl Jam, lol! 😆
@@MTKDofficial The best thing? Oh wow, YAY!!! 😃 Glad to hear that! I was hoping you wouldn't be offended (or worse, not know who I was talking about! 🙃 haha!) I LOVE Eddie Vedder too!!! Best singer ever!!!
@@SweetStuffOnMonarchLane ok well maybe not the best thing. Haha. But I’m a huge Pearl Jam fan. I remember seeing them on SNL for the first time in 1992. I was blown away. Lol.
@@MTKDofficial Haha! Yeah, I'm a huge fan, too! You have a good memory (or maybe they just made a strong impression on you!) We saw them back in 2006 in Grand Rapids, MI. Omgosh, SO good! We had nosebleed seats, of course, and I remember thinking how lucky those people were on the floor in the first row sharing a bottle of wine with Eddie during Crazy Mary! th-cam.com/video/RlTEnz7Hl9I/w-d-xo.html I WAS THERE!!! LOL! 😃
Would you be able to tell me if Venezia stone is a reputable company? I never heard of it but the sales guy said it's good. Thanks for such a helpful video
Hi. Venezia is an importer. They bring in quartz and other stones from around the world. This is fairly common and not something to worry about. However, the issue is, where they are getting their slabs from. If you can find that out, then it would be easy to tell if it is a good quality stone. The sales gut should know this info.
Shoot! That's not good. You will really need someone (another fabricator maybe) to look at it. If it's just an installation issue, then it should be fixable. If it's an actual fabrication issue, I would go after the fabricator. Someone else may not want to touch it and be liable, so that's a tricky one.
Dude, this is the most informative video! Thanks for educating me. I was hired to install a quartz countertop by some friends and they apparently don't have a clue about anything. What they had delivered to their home is not a countertop, it is a five-foot by ten-foot slab. We live on an island which makes shipping prices astronomical so sending it back is not really an option. So now I am tasked with fabricating the countertops. I have never worked with quartz before so I am trying to educate myself as best I can. Your video was very helpful. I wish I could find a video on the fabrication of quartz countertops that is as informative as this video is. But I highly doubt that I will. Thanks again.
Sean! Thanks for the comment. I really appreciate it. My goal is to help the viewer as much as possible. Sounds like you are in a predicament though especially if they sent a slab. I wish I could help you with the fabrication info, but it is not a skill I'm proficient in. I've only ever seen it done with a CNC machine and highly specialized equipment. If I come across something of value I'll send it your way.
Make sure you wear a p100 respirator, the quartz dust is definitely not something you want to breathe in, EVER. It will screw up your lungs permanently
If you need to cut seams at any areas aling the install, having one big piece may actually be a benefit. Color and shade matching among different "slabs" of same-brand quartz is a definite must if one buys multiple smaller sizes.
I am in the process of getting new quartz countertops and I have chosen honed black. Is there anything I should know specifically about honed vs polished?
From what I hear, honed finishes are desired partly because they are easier to keep looking clean. I've never had a honed finish, so I can't say from experience. However, I think it is a very beautiful finish and it's nice to see this option being offered more and more. Getting tired of high gloss.
@@MTKDofficial I hope they ARE easier to keep clean! The reason I chose honed, though, is that I am also getting under-cabinet lighting and did not want the underside of the cabinets reflected in the countertop. Will be getting them this month (Nov.) and will let you know if they are easier to keep clean.
Are Cambria quartz the same everywhere? Eg is the Cambria the same at big box stores (HD) the same as the Cambria at my local Quartz and Quartzite yard?
If you get sharpie stains, use toothpaste. Let it sit for about 10 mins. Depending on how deep the mark, you may need to repeat the process once or twice, but it works and no need for the magic eraser
It's a fine product. Not as popular as it used to be. It is not made from plastic. It is an acrylic solid surface. Seamless, repairable, and impact-resistant.
have you found that there are imperfections below the surface of the quartz, we have had problems with which appears to be soda can sized rings and water marks, are installer had tried to remove the spots to no avail and the second set also has the water marks. have you seen this before. are stone manufacturer is compac, thanks video was very informative
Great informative video! I’m in the middle of a kitchen remodeling and choose a quartz countertop. I purchased a Calacatta Ultra quartz stone and Googled who manufactured it, which is MSI Surfaces. This company is not on your list. Is this a reputable company?
Hi Mark! I have a question. I want to put a black quartz with sparkles on my kitchen BUT the sales person told me that black quartz does not tolerate heat well. He advised to go with black granite instead. Should I buy the granite? I really want it to be black with sparkles ✨ Ty!
Hmm. If you are going to be putting scolding hot pots on your countertop, then maybe not. But just use a trivet if you have a habit of doing that. Quartz is heat resistant to a point. However, the more material in it (glass, metal, etc.) the more resin. It's the resin that can be effected by heat. The black granite is a nice choice too. Hard to say. Use a trivet either way actually.
I am hoping to take a black quartz and finish it with a honed or leather look. I looked on the Houzz and they seem to have terrible reviews for this finish. Can you explain why please? I’m trying to replicate soapstone in the kitchen.
I think it's because it's more finicky to keep looking clean. Honed finishes show more finger prints, smudges and day-to-day usage marks. Otherwise, it's the same as a polished finish.
Thank you for so many wonderful videos! Some question I have is do you think it is ok to use stock cabinets under quartz countertops? Such as would stock cabinets hold up long term ? And if you were to want to upgrade lower cabinets later on, would the quartz countertop have to be busted off and ruined in order to replace the cabinets?
Depending on the quality of the stock cabinets, I'd say sure. Most times you would be fine. If you upgraded later, the top could come off. Easier if there are no seams however. Though the new cabinets would have to match exactly in size, so you don't run into trouble. I would never recommend doing the countertop first if you are also planning on changing the cabinets. Do the cabinets first and later you can upgrade easier. But it can be done.
I have a question, please. I bought 2 similar bathroom vanities, one for the hall bath and one for the master bath, with quartz tops. Every time you even touch the top on the larger one it makes an imprint from your fingers, which doesn't go away, but it does not do this on the smaller one. It seems like it is absorbing the oil from your skin. I bought them together at the same time from Menard's. It seems like the larger one needs something to seal it but you are saying it doesn't. One does seem to be shinier than the other but neither of them are dull. Any suggestions?
First off, love your user name. I have a tattoo on my wrist with that scripture from Revelation. Anyways, your question. Sounds like you have product that was likely made in a place where they don't pay attention to standards. Manufactured quartz is made non porous and sealing it would do nothing, unless it's either poorly made or it is not actually quartz but a natural stone. I've seen it before too. If it's absorbing oil from your skin, something is up for sure. You could try sealing it, but I have no idea the result. I wonder if there is a warranty on it? Have you asked the staff at Menards?
@@MTKDofficial that explains the shadowing, whether acidic or any oil, that results from penetrating the top layer of all my countertops. They look awful now. The flippers charge a fortune for their efforts, in this high end area! But oh boy I had no idea the poor quality throughout that we paid a fortune for. Any way to fix this shadowing would be heaven sent....
Home depot associate told me that ppl thede days selling quartz counter tops that are not sealed and will get stain vrry quickly from oil , food , coffee , dish soap liquid .. is that true ?
Well... maybe they were meaning quartzite, which definitely has to be sealed? (Just giving them the benefit of the doubt) Manufactured stones like quartz do not need to be sealed. They are manufactured to 0.05% porosity. There are however, brands out there that do not manufacture quartz to the same standards as the Breton patent. That doesn't mean that they are not good, but harder to verify if they stand up quality wise. Hope that helps
I am looking at purchasing a quartz countertop. The manufacturer has multiple thicknesses available (max 6 cm). To make 6 cm you have the options of either having two 3 cm slabs laying on top of each other and baked together (but if it's heavily patterned, you won't get the seamless look when looking at the slab from the side) OR having the edges mitered (where you can get a more seamless side view appearance but it costs more money since the manufacturer will need to try and match the edges of the slabs). Please consider adding this detail to your vid. Thanks for the video!
I’ve never heard of 6cm slabs for countertops. I’ve hear of 6mm big differences. To get a 6cm look the edges are mitered or stacked. There is no benefit to glueing 2. 3cm stones together just to get the thick look for the entire slab . I own a countertop company. And the edges should line up because heavily patterned quartz slabs should be almost identical. It’s very costly to have pattern changes.
@@JS-zb1vv Cambria offers some countertops in 6 centimeters. Some people may like the look. If one uses a chiseled or rock face edge profile, the change in the pattern between the 2 slabs isn't as noticeable. I saw it in a showroom once.
@@JS-zb1vv I don't work in the field. The Cambria website and the showroom rep told me it was 6 centimeters thick - just sharing what I was told by Cambria with others. Since you're in the profession, feel free to verify if you'd like.
I had not heard of Maxima Stone. They look fairly new and a quick search didn't help in determining where they are actually manufactured. Looks like Edmonton, but that might just be distribution.
@@MTKDofficial I’m in Edmonton and got a pretty decent quote for it, I’ll do a little more research on it and ask some of these questions when they come tonight with samples
I’m trying to research Allen & Roth countertops. They are a lowes brand but trying to dig in to see if they use Breton stone is a challenge on google and on their website as well. It keeps going back to “Sage surfaces” trying to get info on that is becoming confusing. Do you know anything about Allen & Roth and Sage surfaces??? We found a nice quartz countertop from Lowe’s but want to make sure it is of good quality. I feel like it is because it’s a big franchise cooperation. Any additional help would be greatly appreciated. Thanks
From what I could find, it seams that Silestone is the manufacturer of Sage surfaces, or at least a Silestone owned plant. If that is the case, you should be fine. The warranty is pretty detailed. That said, I can't say for sure.
I have seen on multiple sites that quartz can handle up to 300 degrees or so. Anything above that will lead to damage, as the resin in the quartz melts and discolors. @9:28, you indicate quartz is heat resistant up to 700 degrees Celsius which is 1,292 degrees Fahrenheit. Please share your source.
Mark, I am trying to buy a 55-inch length and 22-inch depth Quartz vanity top with a sink on the left side. Where can I go to buy it in southern California?
If you are looking for off the shelf, that would be difficult to find. However, if you don't mind custom, just about any home improvement retailer would be able to order that. Home Depot are known to carry quality quartz.
One thing that wasn't mentioned. since it had resin in the mixture, over time that resin will yellow anyplace that sunlight hits it... about 15 years down the road. My Autumn Foliage pattern formicastill looks the same 30 years later as they day I put it in. Holy cow.. at 60$ a square foot, my kitchen would be 4,500$ just for quartz countertops. I paid 2,500$ for my entire kitchen, countertops, cabinets, and all. Glad I built my house when I did.
Hi. By "passive" do you mean less maintenance? If so, it does not require any sealing. Just regular cleaning as you would anything else. So, I suppose the answer is yes.
Hi. Your videos are informative. I am planning to get a quartz countertop for kitchen. Other options are granite, nano glass and full body vitrified kitchen counter slabs. I have seen a brand Petrostone based in Pune, India. Brochure says it's made with Breaton Stone Technology from Italy. It mentions high grade quartz. It's economical compared to Caesarstone and Silestone and I can get Calacatta designs which I certainly can't with the premium brands. My question to you. 1. Is Petrostone a safe bet for quartz they give a 10 year warranty. Silestone is my 2 nd choice but can opt for a base grey shade and not the white ones 2. Should I consider full body vitrified tile...all designs available and very budget friendly 3. Is granite the safest bet. It's the most economical of the lot though I can go upto the grey shade of silestone 4. 3 cm slabs from Petrostone are placed to order while 2 cm slabs the only options from silestone. Is 2 cm thick slab sufficient or do we need 3 cm slabs Once more thanks and waiting for your reply
Hi Michelle. Thanks for watching and leaving a comment. Here's my opinion on your questions. Hope they help. 1. I have no experience with Petrostone. Although they use Breton tech, going up against Silestone or Caesarstone is tough. They have been in the industry for a long time and are two very trusted names. So personally I would probably go with your second choice. 2. I love vitrified tile, however I think large scale slabs are a better way to go. Have you considered porcelain slab? 3. I think granite is the safest bet overall in terms of durability and heat resistance. The only problem is you don't get a warranty on the material, only the finish (if it comes pre-sealed). At lease with quartz you do get a good warranty. 4. 3cm for sure. It's been the industry standard in North America for a long time.
@@MTKDofficial thanks. . that was useful I haven't seen these porcelain slabs here We have 15 mm thick full body vitrified tile 240 x 80 cm which is an option for kitchen counter tops. But I feel they are prone to get chipped.. Looking forward to more videos Brands of caeserstone and Silestone are only available at 20 mm here. Main reason I considered Petrostone since I can order 30 mm But guys here say 20 mm should be fine
I just had my quartz coutertops installed, this information is SO useful, thank you! The one thing that I never thought of was testing the draws before the counter guys left, my draws don't open! I had a moment and cried, this has been a long process and I was so excited to see them in place I never thought to test that. I just thought I would put this information out to the world for others to monitor before their counter people leave 🙂.
It can be a draining experience at times, but I hope yours is, ultimately, a rewarding one.
Forgive me if I am incorrectly picturing your issue.
If they are a reputable company who cares about such reputation, they will be willing to address the issue -- if it can be, and there is almost always an option that might be accepable, albeit, a modification of your original vision.
If there is a special overhang/enlarged edge that blocks your cabinet doors, and you are willing to change the look you wanted, they could modify/replace the countertop with a thinner edge. Some companies will do this at no extra cost, or definitely at reduced cost -- because something like that should've been noticed by experienced installers. This is most true if you, yourself, noticed it soon and told them shortly after the install.
Or, they should be willing to work with you by temprarilly removing the counterop until a raised wood base is attached and seemlessly blended into your existing cabinet framing. Then the countertop can be reinstalled, now just slightly higher to avoid blocking the doors.
If all that is too costly [or if backsplashes have now been installed and countertop removal would cause cistly damage to it, there are companies that will make new drawer and door fronts [or a handy-person might even just slightly down-recenter the exiting fronts] to eliminate the blocking.
Case in point, my new granite countertops were installed with choseled edges. I didn't have time to fully look over things -- certain things take a while to notice after the excitement and newness of the install happens. Plus. I had to get back to my job. It wasn't until two says later that I had a good hour to look things over in the daylight. I noticed unacceptable areas of the chiseled edges -- significant [i.e., most] of the edging.
Although I signed their "good-n-happy" appproval sheet before the installers left -- the company was honest enough to come back and look it over. Even though they refused to acknowledge thatvtheir claimed "chiseled edges" weren't [the edges looked like smooth waves], they ultimately removed the countertops and gave me a full refund.
Granted, they knew my personality [and couldn't claim I misunderstood reality -- before going with them,I showed them pictures of the type of chisel I wanted and they agreed]. They knew that I would take further steps until rectified. They did the removal and refunded me [albeit, a month later] -- but not without the salesperson saying, as she left my house the kast time, "Good luck finding someone who will give you what you want."
I did, the very next day. This company had far more experience with all types of edges, and gave me a beatiful, TRUE, chiseled edge.
Bweare of the many "boutique " countertop sellers. It is time consuming, but find shops that have examples, and also are willing [as my second-and-better choice] to actually do a small text cut to show ypu ahead of time and ask if is acceptable before doing the whole thing.
Oh, and this second company checked the clearance of the drawers and doors before bonding the slab to the framing.
This is one of the best presentations I've ever seen. Clear and concise and you have a very natural delivery. I could listen to you all day! Great work. And thanks for the great info.
Thanks! Glad you found it helpful.. Appreciate the kind words.
I want to use quartz as a table, how can I add legs, can I do this myself?
Thanks
I don't do this myself, but I have a relative who makes candies, chocolates, and confectionaries. Keeping the countertop warm or cold (depending on what she's making) is really helpful to the process. She complains often that she can't have this in her home and she was spoiled by the business where she learned. She has a section of marble for the cooling properties, but she'd die if she could have a heated section. I can't wait to tell her about this trick!
I ❤ this information Thanks so much
I'm starting on my new kitchen and your information on everything has been so helpful. Thanks!
Thanks to the info I got from your video there are now quartz countertops in my kitchen. And they are GREAT!! And yes I made sure it was a Bretonstone quartz company. Thanks again.
Awesome! Glad my content was helpful!
I was about to look up maintenance as you were speaking and of course it was the next subject - very concise and covered many details! Thanks
This video told me everything I needed to know about quartz countertops. We just bought a brand new home that comes with quartz countertops installed. Thank you Mark
This was very valuable information! Thank you for delving into all the nooks crannies and giving us the benefit of your research. A more informed shopper is a happier shopper in the end. 👍👍
Sweet, So glad it was helpful.
Well, that was SUPER informative! Thank you so much for taking the time and educating us.
Hey Johnny! Thanks for the comment.
About to install quartz countertops. We were informed the 10’x2’ slabs were supposedly 190lbs by the homeowner. Yeah when me and my buddy unloaded them from the delivery truck, I’ll tell you right now they were indeed not 190 lbs. they were much much more lmao. I think they were more like 400. Only us 2 were there when the delivery guy came, and we unloaded them and that was a back breaker forsure. Unloading 4 separate 10 foot slabs with 2 guys…. Goodbye back and arms
Your video sold me on quartz - demo next Tuesday and hopefully install by Friday.
Sweet! Hope it all goes well! Thanks for letting me know!
@@MTKDofficial I hope it all goes well too, especially after watching your video on kitchen counter "don'ts". I mean, I've never seen a worse install job than that woman's whose counters didn't even touch the cabinets...jeez.
This was really comprehensive--thank you! You know what else will stain your quartz countertop? FOOD COLORING. I happen to know from kid experience. Ugh.
Mark, everything I read online says quartz has a recommended max temp of 300F/150C due to possible damage to the resin. Quite a difference between your 1300F/700C! I did learn a ton about my new quartz countertops, so thank you.
Hey thanks for watching. I pinned a comment with that correction a while back. My bad!
While I like the way you broke down the "things you need to know " categories, there is some misinformation in this video. 1) using the Breton method of manufacturing doesn't guarantee equivalent quality. That method combined with good raw materials is what creates quality engineered stone. 2) material thicknesses are not that thin (you referenced mm rather than cm). 3) heat resistance is not up to 700 degrees Celsius. It isn't even 700 degrees Fahrenheit. It accepts moderate heat and is susceptible to thermal shock. 4) it cannot be used outdoors...which needs to be part of the conversation...even in covered areas. Always check with the actual manufacturer of the product with regard to how to care for quartz surfaces. And finally, a brand name does not mean they actually manufacture their own product. Some "brands" are produced for a brand name but that company doesn't actually control the content/process (just color or pattern definition).
Hey. Thanks for the comment. And the insight on a few of the points I messed up. I appreciate it. While I try to research and find good info, it’s never perfect.
What temp/degree would you say is correct?
@@MTKDofficial you are welcome! I was lost when I first got immersed in the stone industry. There's a lot to know and technology is changing our choices rapidly. Google doesn't always have the most current information which is a challenge in all areas of design.
@@russman1958 check with the manufacturer. Usually less than 350 degrees F.
@@whatsgoodinthehood thank you !
This is great content.
Two things...
If you get a permanent marker on your counter top, just get a dry-wipe marker and go over the permanent marker and it'll just wipe off.
Secondly,
Can you place a quartz countertop over an induction cooktop and use pans on the quartz without it cracking from the pan heat?
Thanks! I feel a lot better about choosing quartz for our new build.
Yeah, you really can't go wrong with quartz. Most places are selling the good stuff. It's too nice!
The best channel about kitchens (I've watched lots) Mark is awesome!
I've helped my son in-law install several quartz counter tops and when he does a seam it's like a science experiment with two suction cup based clamps that not only pull the two slabs together but adjust the height of each slab and when finished the seam is invisible. Unfortunately not all installers are willing to invest in the equipment needed to get to this quality.
I never knew about the wire mesh heating element for quartz countertops. We have quarts currently and in the winter it is almost too cold to work on my computer at the island. In our new home, I will have this wire mesh heat feature added ~ thank you so much!!!!
hello. thank you for this video. best informatjon out there on Quartz
You are an excellent teacher. Found you from Living on a Dime channel. You're awesome 👍
Hey! Thanks so much for saying "Hi"! Appreciate the comment.
What a well done job in letting folks know the ins and outs of quartz counter tops. Also, thanks for addressing my question.
Hey George! Glad you commented when you did. I hadn't even considered it. Thanks again for watching.
About to build my first home. I'm about to marathon watch your channel! Great info thanks! Commenting for the algorithm!!!!!!!!!!!!
Haha. Thanks so much. Got to keep that algorithm happy!
Thanks for the list of companies. Having looked at a couple places casually they all seem to have the same thing and nothing that makes me want to spend thousands of dollars. I'll use your list to research further and hopefully find something I LOVE.
"They" say Cambria has some rally nice designs. But I agree, they can all look a little similar after a while.
Thanks. On the market now for quartz countertop, and you answered questions I hadn't thought of, but am glad to have the answers.
Awesome! I think it's a great choice.
Wow Mark, Thank you for the fantastic job you did explaining everything to us!! Much appreciated! Great video!
Hi Claudia! Thank you very much for the comment. I'm glad the video was helpful!
Exactly the discussion I needed to hear. Thanks! If my budget worked for it, I’d probably choose quartz. The countertop in the home I just bought it laminate that is edged with wood. Dated. And has evidence of some (not as much as one would have expected with this design) but some water damage. But considering all things, I’m going with laminate. For the cost, durability, and the fact that overall I prefer the sound of setting dishes on laminate over quartz or other stone surfaces, I think laminate is what I actually want. Will it need replacing in 7-10 years. Probably. But by then I might actually be interested in a kitchen renovation anyway. I’ll use the $$ saved on adding upper cabinets above the existing cabinets that are currently topped off with crown molding about 18” lower than the ceiling.
Thanks for the comment. I'm glad the video was helpful. There is definitely nothing wrong with going laminate.!!
Very well-done video. I learned a lot. Thank you
Wonderful video. Very informative. I’m thinking about getting IKEA courts countertop. Do they supply quarts counters from manufacturers who use the Breton method?
Thanks for watching, and yes they do!
Very useful content. Thanks. I am wondering whether the heat of a cooktop (downward ventilation) can damage the surrounding quartz countertop.
I don't see that being an issue. Though I don't really know ow much heat it would draw.
Thanks, Mark!!! Although a few months old, I am just getting to this one! We have gone to the slab-getting place :) before but we are now ready to make final decisions and therefore this is perfect timing. Your videos are so informative and honest. THANK YOU! Wish us luck.
Hey Laurie! Thanks so much for the comment. I hope it goes well!
Fabulous! Everything I wanted to know about quartz countertops but was afraid to ask. Can you explain the pros and cons of getting a quartz countertop that includes a backsplash?
Hi there! I watched the video hoping to find out how to get water stains out of a quartz countertop as well as to find out if you can remove scratches. I have watermarks all around the faucet and i got scratches from setting a ceramic planter on the counter. The video was awesome, but didnt hit on those. Do you have any suggestions? I saw 0000 grit steel wool for the water stains? Thank you!
Be careful not to make it worse by removing the sheen from sanding. I'd even try a Mr. Clean Magic Eraser. I've seen videos on repairing surfaces, but am certainly no professional at this.
Thanks for the video! Have you used Vadara brand quartz? It has a look more like quartzite, but I didn't see the company on the list you have in the comments.
I haven't heard of this brand, but there are lots of brands popping up all the time.
Your videos are very informative and enjoyable to watch and listen to. Thank you for the knowledge and insight, very very helpful and appreciated. Cheers from Wisconsin.
Appreciate the kind comment! Thank you.
Ty! Great info!!
Is there a way to know if a company does NOT use the Breton Stone technology? Thx again!
Hey Jennifer. I've added a list to the description with all the company's that use Bretonstone slabs. You would have to ask the supplier or fabricator where they buy their slabs from. If it's not on that list, it's not Bretonstone.
If I wanted to add an additional water faucet perhaps for water filtration. How easy is it a drill a hole through a Quartz countertop?
We have seams in our newly installed quartz. I noticed they raise up a little. Can the area be sanded down? Will it effect or dull the color in that area? Is the stamp that deep? It’s 2cm.
Great video. About the seams, our L shaped countertop does have a seam that is visible to the eye and you can feel it with your nails. We had a couple of nicks that the warranty guy easily repaired with resin beautifully. But when I asked about the seam, he checked it with his razor blade and said it was actually better than most. If I could upload a photo here, I would. Was this person honest or just lazy? Every time I clean the counter I feel that seam catching, and I do wonder how much dust etc can accumulate over time? Thanks
Hmmm. I'd say most seams are somewhat noticeable. I'd say he was being honest. Hard to say without seeing it.
Thank you for the great, eye-opening video! Any suggestions on where to go to research the quality and safety of a particular quartz product?
Hey Brian. Thanks for watching.
The best way is to call the manufacturer, if you can get that information. Otherwise, I normally do a search to see if a product is manufactured using the bretonstone patent. Usually you can find some info at least. If nothing turns up, I’d be suspicious of the product. It doesn’t mean it’s not good, but it’s always nice to see some technical specs. These should be readily available in one nice location, but unfortunately not.
Thank you so much. Moving soon to my brand new home and had no idea how to care for my Quartz countertops. I have a question on the topic of stains. I’m originally from Puerto Rico and in our cooking we sometimes used Annato oil. I’m very careful when using, but sometimes accidents happen. Wondering how will that stain be taken care of. This is the kind of oil that the stain will linger for days. Only harsh chemicals will take the stain out. What is your advice.
Hi Sandy. I would be careful with harsh chemicals. Barkeepers friend is what I would recommend for quartz. Always test it out somewhere inconspicuous first. But that stuff is really great.
@Mark Tobin Kitchen Design its says right on the package for barkeepers friend "for non-stone countertops". I'd be nervous recommending it to anyone knowing this...
Great and thorough review. Thank ypou.
Hey! I want to buy honed quartz and im super worried about sealing every other months and cleaning it. I have researching online but getting mixed information. What do you recommend? Would hones quartz be trickier than polished quartz in cleaning?
Quartz does not need to be sealed, whether it's polished or honed. A honed finish just requires a little more care in cleaning. Just don't be abrasive with it. Honed finishes show more finger prints and smudges and in turn people end up cleaning it more. hope that helps.
We are looking at Quartz countertops...we are younger so we wanted it because of being able to put hot pans on surface without worrying about deforming other materials..and mostly because my wife don’t want the “cheap” look of laminate... my question is...will black quartz show fingerprints and smudges more likely..kinda like stainless steel. Debating between white or black and if either one is hard to keep clean
Quartz is a great choice! Darker colours tend to show more smudges, but particularly if they are solid colours. Like a solid black. However, the way the light reflects at certain times of day shows smudges on any colour.
Quartz is easy to keep clean, definitely go with the colour that you really love!
And send me a pic when it's done!
Love this video and this helps a lot
hello..what product can you recommend to polish a synthetic quartz?
What do you recommend for repairing a chip? I have a small one on the edge of the sink.
Thanks for the video. I picked out my quartz before video and just found out its not Breton Stone!!😫. So back to looking..ugh.
Can you use methyl alcohol or acetone to clean permanent markers on the quartz?
Have you tried a magic eraser? You'd want to check with the fabricator on the use of acetone, although I think it's generally ok.
@5:41, you mention slab thickness is between two and seven mil. I assume that mil is millimeters, which isn't much more than 1/4 inch. I have seen quartz much thicker than that, so please elaborate on your thickness comment.
I pinned a correction in the comments. I meant to say CM
I test quartz here in this video - th-cam.com/video/D3PEsEXmtAE/w-d-xo.html
Content correction: Hey friends, while I always do my best to provide good information, sometimes I will make mistakes or get things wrong. A couple things were pointed out to me that I wanted to correct.
1. The companies that use Bretonstone plants have the liberty of adding the aggregates they wish, to make the patterns and styles they decide. This can effect quality to a degree.
2. I mentioned mm instead of cm for thickness.
3. Quartz is heat resistant to nearly 200 deg. C. It is subject to thermo shock as well.
Thank you to all who watch my videos and comment!
Hi! I find your video very useful, so thanks! We are just starting to plan our new home. Thanks also for including food safety in your presentation! I am a food safety practitioner for food manufacturing and think this topic cannot be stressed enough. 😉
A small FYI: NSF (now called NSF International) is the National Science Foundation (not “Sanitary”). Headquartered in Ann Arbor, Michigan. Go Blue!
@@janine4360 Hey thanks so much and for the correction. I appreciate it. I'd love to learn more about food safety and how it relates to the surfaces we put in our homes. If you ever would consider chatting about it please reach out at mark@mtkd.ca
Wow, great video. I learned more from it. I wish I'd found your channel sooner. Thanks!
Hey Bernice. Thanks for letting me know and thanks for watching.
Excellent presentation.
Thanks for the video. What about the prefab quarts counter tops that are manufactured in china? I have seen a counter sized slab and backspash priced under $200. Can those be trusted?
That sounds a little suspicious to me. Ok for a vanity top maybe but I'd want to know the warranty on the product.
any suggestion for a quality quartz repair kit for a small chip?
I've never seen a repair kit. Reach out to a fabricator (if there's one in your area) and see what they recommend. They may also have something to offer. Just not sure.
Can you please advise me on the following. I have a suede finish quartz kitchen countertop that shows all water marks, finger prints etc. that are driving me nuts. I have located a company that says they can hone, polish and seal the countertop. Is this something that can really be done at home or am I being fed a lie.
Well, quartz can be sanded and polished. That's how they get the finish at the fabrication plant. Doing it in the home is a pretty big job. Do they say how much? I would probably want to see some examples of their work. But it is doable.
Thanks for such an informative video.. Do you happen to know the name of the quartz in the video at 10:39 (where you are talking about warranties)? Thanks!
Well Kathryn, I actually think that is Crema Pearl, which is granite 🤦🏻♂️. It could be something like Atlantic Salt (Caesarstone) though.
@@MTKDofficial Thank you!
outstanding video. clear and concise, thank you.
Great information, especially about the pricing differences! You've convinced me to subscribe! 😀 You have a nice voice and demeanor about you... you remind me of Eddie Vedder from the band Pearl Jam, lol! 😆
AHHHHHHH!!!! That is the best thing anyone has every said to me! I love Eddie Vedder! Thanks.
@@MTKDofficial The best thing? Oh wow, YAY!!! 😃 Glad to hear that! I was hoping you wouldn't be offended (or worse, not know who I was talking about! 🙃 haha!) I LOVE Eddie Vedder too!!! Best singer ever!!!
@@SweetStuffOnMonarchLane ok well maybe not the best thing. Haha. But I’m a huge Pearl Jam fan. I remember seeing them on SNL for the first time in 1992. I was blown away. Lol.
@@MTKDofficial Haha! Yeah, I'm a huge fan, too! You have a good memory (or maybe they just made a strong impression on you!) We saw them back in 2006 in Grand Rapids, MI. Omgosh, SO good! We had nosebleed seats, of course, and I remember thinking how lucky those people were on the floor in the first row sharing a bottle of wine with Eddie during Crazy Mary!
th-cam.com/video/RlTEnz7Hl9I/w-d-xo.html
I WAS THERE!!! LOL! 😃
Can I use Clorox disinfecting wipes on a quartz countertop?
Always follow the manufacturer's recommendations (copout answer). I don't see that being an issue at all.
Would you be able to tell me if Venezia stone is a reputable company? I never heard of it but the sales guy said it's good.
Thanks for such a helpful video
Hi. Venezia is an importer. They bring in quartz and other stones from around the world. This is fairly common and not something to worry about. However, the issue is, where they are getting their slabs from. If you can find that out, then it would be easy to tell if it is a good quality stone. The sales gut should know this info.
Your videos are awesome! Thank you!
How do I get the seams fixed? My fabricator was horrible
Shoot! That's not good. You will really need someone (another fabricator maybe) to look at it. If it's just an installation issue, then it should be fixable. If it's an actual fabrication issue, I would go after the fabricator. Someone else may not want to touch it and be liable, so that's a tricky one.
Dude, this is the most informative video! Thanks for educating me. I was hired to install a quartz countertop by some friends and they apparently don't have a clue about anything. What they had delivered to their home is not a countertop, it is a five-foot by ten-foot slab. We live on an island which makes shipping prices astronomical so sending it back is not really an option. So now I am tasked with fabricating the countertops. I have never worked with quartz before so I am trying to educate myself as best I can. Your video was very helpful. I wish I could find a video on the fabrication of quartz countertops that is as informative as this video is. But I highly doubt that I will. Thanks again.
Sean! Thanks for the comment. I really appreciate it. My goal is to help the viewer as much as possible. Sounds like you are in a predicament though especially if they sent a slab. I wish I could help you with the fabrication info, but it is not a skill I'm proficient in. I've only ever seen it done with a CNC machine and highly specialized equipment. If I come across something of value I'll send it your way.
@@MTKDofficial Thanks, Mark. You truly are a spreader of knowledge.
Make sure you wear a p100 respirator, the quartz dust is definitely not something you want to breathe in, EVER. It will screw up your lungs permanently
If you need to cut seams at any areas aling the install, having one big piece may actually be a benefit. Color and shade matching among different "slabs" of same-brand quartz is a definite must if one buys multiple smaller sizes.
I am in the process of getting new quartz countertops and I have chosen honed black. Is there anything I should know specifically about honed vs polished?
From what I hear, honed finishes are desired partly because they are easier to keep looking clean. I've never had a honed finish, so I can't say from experience. However, I think it is a very beautiful finish and it's nice to see this option being offered more and more. Getting tired of high gloss.
@@MTKDofficial I hope they ARE easier to keep clean! The reason I chose honed, though, is that I am also getting under-cabinet lighting and did not want the underside of the cabinets reflected in the countertop. Will be getting them this month (Nov.) and will let you know if they are easier to keep clean.
Can you comment on the MSI Q Quartz line?
Are Cambria quartz the same everywhere? Eg is the Cambria the same at big box stores (HD) the same as the Cambria at my local Quartz and Quartzite yard?
Hey Julia. Yeah it is all the same.
Hi, this video helps me a lot. I am thinking of using quartz as my backsplash. Will the heat from stove affect the backsplash? Please help me
Hi! I think you will be totally fine with quartz as a backsplash. However, if you are worried, look in to Dekton. Totally heat proof.
Thank you for the information.
If you get sharpie stains, use toothpaste. Let it sit for about 10 mins. Depending on how deep the mark, you may need to repeat the process once or twice, but it works and no need for the magic eraser
Cool! Great tip!
What are your thoughts on corian (the lady said it was made from plastic?)
It's a fine product. Not as popular as it used to be. It is not made from plastic. It is an acrylic solid surface. Seamless, repairable, and impact-resistant.
have you found that there are imperfections below the surface of the quartz, we have had problems with which appears to be soda can sized rings and water marks, are installer had tried to remove the spots to no avail and the second set also has the water marks. have you seen this before. are stone manufacturer is compac, thanks video was very informative
Interesting. I can't say I've come across this. What are they saying about it, as the cause? Has a company rep been out to look at it?
Can technology such asva cellular phone charger be embedded in a quartz island counter top?
Yeah, the fabricator can make that happen. It's a great option.
Great informative video! I’m in the middle of a kitchen remodeling and choose a quartz countertop. I purchased a Calacatta Ultra quartz stone and Googled who manufactured it, which is MSI Surfaces. This company is not on your list. Is this a reputable company?
Yes. MSI is good. Some of these companies are under broader names. I’ve researched MSI before to verify.
Hi Mark! I have a question. I want to put a black quartz with sparkles on my kitchen BUT the sales person told me that black quartz does not tolerate heat well. He advised to go with black granite instead. Should I buy the granite? I really want it to be black with sparkles ✨ Ty!
Hmm. If you are going to be putting scolding hot pots on your countertop, then maybe not. But just use a trivet if you have a habit of doing that. Quartz is heat resistant to a point. However, the more material in it (glass, metal, etc.) the more resin. It's the resin that can be effected by heat.
The black granite is a nice choice too. Hard to say. Use a trivet either way actually.
If you do use something on your quartz countertop that makes it dull and takes the shiny ness away can that glossyness be restored? Thanks
Quartz can be refinished, yes.
Very educational! Thank you.
How to remove hard water stain from quartz countertops around the kitchen sink faucet?
can i insert plastic anchors in quartz so i can screw mount my range hood too it.
You'll want to check with a fabricator on that one. I can't say for sure.
Thank you! We’re getting quartz countertops next week. I feel like we made a good choice 👍
How has it held up?
Can Quartz withstand weathering? I am planning to put a Quartz table outdoor
It will not withstand UV discoloring and intense heat. Otherwise it would be fine.
@@MTKDofficial noted thank you for information.
I am hoping to take a black quartz and finish it with a honed or leather look. I looked on the Houzz and they seem to have terrible reviews for this finish. Can you explain why please? I’m trying to replicate soapstone in the kitchen.
I think it's because it's more finicky to keep looking clean. Honed finishes show more finger prints, smudges and day-to-day usage marks. Otherwise, it's the same as a polished finish.
Thank you for so many wonderful videos! Some question I have is do you think it is ok to use stock cabinets under quartz countertops? Such as would stock cabinets hold up long term ? And if you were to want to upgrade lower cabinets later on, would the quartz countertop have to be busted off and ruined in order to replace the cabinets?
Depending on the quality of the stock cabinets, I'd say sure. Most times you would be fine. If you upgraded later, the top could come off. Easier if there are no seams however. Though the new cabinets would have to match exactly in size, so you don't run into trouble. I would never recommend doing the countertop first if you are also planning on changing the cabinets. Do the cabinets first and later you can upgrade easier. But it can be done.
wow what a great video, thank you so much!
I don't see Arizona Tile is on the list. What's the ultimate test for quality?
I have a question, please. I bought 2 similar bathroom vanities, one for the hall bath and one for the master bath, with quartz tops.
Every time you even touch the top on the larger one it makes an imprint from your fingers, which doesn't go away, but it does not do this on the smaller one. It seems like it is absorbing the oil from your skin. I bought them together at the same time from Menard's. It seems like the larger one needs something to seal it but you are saying it doesn't. One does seem to be shinier than the other but neither of them are dull. Any suggestions?
First off, love your user name. I have a tattoo on my wrist with that scripture from Revelation. Anyways, your question. Sounds like you have product that was likely made in a place where they don't pay attention to standards. Manufactured quartz is made non porous and sealing it would do nothing, unless it's either poorly made or it is not actually quartz but a natural stone. I've seen it before too. If it's absorbing oil from your skin, something is up for sure. You could try sealing it, but I have no idea the result. I wonder if there is a warranty on it? Have you asked the staff at Menards?
Amen! But the weird thing is.. i never left that comment. Was I hacked? Ive never seen anything like this before 😳
@@MTKDofficial that explains the shadowing, whether acidic or any oil, that results from penetrating the top layer of all my countertops. They look awful now. The flippers charge a fortune for their efforts, in this high end area! But oh boy I had no idea the poor quality throughout that we paid a fortune for.
Any way to fix this shadowing would be heaven sent....
Really good vid. Do major companies make prefabricated quartz lengths like 112" x 26" with backsplash at decent prices?
Probably not 112". 120" maybe? Backsplash would be separate I think.
But I'm thinking you will need to go custom.
@@MTKDofficial Where does one find prefab vs. slabs?
Home depot associate told me that ppl thede days selling quartz counter tops that are not sealed and will get stain vrry quickly from oil , food , coffee , dish soap liquid .. is that true ?
Well... maybe they were meaning quartzite, which definitely has to be sealed? (Just giving them the benefit of the doubt) Manufactured stones like quartz do not need to be sealed. They are manufactured to 0.05% porosity. There are however, brands out there that do not manufacture quartz to the same standards as the Breton patent. That doesn't mean that they are not good, but harder to verify if they stand up quality wise. Hope that helps
Does Ikea use the Breton process?
In North America they do, and I'm sure it's the same everywhere, but it would depend on the vendor. You would likely need to ask to be sure.
very informative. thank you so much!
I am looking at purchasing a quartz countertop. The manufacturer has multiple thicknesses available (max 6 cm). To make 6 cm you have the options of either having two 3 cm slabs laying on top of each other and baked together (but if it's heavily patterned, you won't get the seamless look when looking at the slab from the side) OR having the edges mitered (where you can get a more seamless side view appearance but it costs more money since the manufacturer will need to try and match the edges of the slabs). Please consider adding this detail to your vid. Thanks for the video!
Hey, thanks for the info. That is not something I had considered!
I’ve never heard of 6cm slabs for countertops. I’ve hear of 6mm big differences. To get a 6cm look the edges are mitered or stacked. There is no benefit to glueing 2. 3cm stones together just to get the thick look for the entire slab . I own a countertop company. And the edges should line up because heavily patterned quartz slabs should be almost identical. It’s very costly to have pattern changes.
@@JS-zb1vv Cambria offers some countertops in 6 centimeters. Some people may like the look. If one uses a chiseled or rock face edge profile, the change in the pattern between the 2 slabs isn't as noticeable. I saw it in a showroom once.
@@ecdubytecdubyt yea but I don’t think it’s 2 full slabs it’s just a laminated edge.
@@JS-zb1vv I don't work in the field. The Cambria website and the showroom rep told me it was 6 centimeters thick - just sharing what I was told by Cambria with others. Since you're in the profession, feel free to verify if you'd like.
Have you heard and have any input on the brand Maxima Stone?
I had not heard of Maxima Stone. They look fairly new and a quick search didn't help in determining where they are actually manufactured. Looks like Edmonton, but that might just be distribution.
@@MTKDofficial I’m in Edmonton and got a pretty decent quote for it, I’ll do a little more research on it and ask some of these questions when they come tonight with samples
@@Chase_Anderson I'd love to know how it goes. Always interested in these things.
I’m trying to research Allen & Roth countertops. They are a lowes brand but trying to dig in to see if they use Breton stone is a challenge on google and on their website as well. It keeps going back to “Sage surfaces” trying to get info on that is becoming confusing. Do you know anything about Allen & Roth and Sage surfaces??? We found a nice quartz countertop from Lowe’s but want to make sure it is of good quality. I feel like it is because it’s a big franchise cooperation. Any additional help would be greatly appreciated. Thanks
From what I could find, it seams that Silestone is the manufacturer of Sage surfaces, or at least a Silestone owned plant. If that is the case, you should be fine. The warranty is pretty detailed. That said, I can't say for sure.
Loved this video! Sooooo helpful! Tks
I have seen on multiple sites that quartz can handle up to 300 degrees or so. Anything above that will lead to damage, as the resin in the quartz melts and discolors. @9:28, you indicate quartz is heat resistant up to 700 degrees Celsius which is 1,292 degrees Fahrenheit. Please share your source.
I pinned a comment with correction. thanks
Mark, I am trying to buy a 55-inch length and 22-inch depth Quartz vanity top with a sink on the left side. Where can I go to buy it in southern California?
If you are looking for off the shelf, that would be difficult to find. However, if you don't mind custom, just about any home improvement retailer would be able to order that. Home Depot are known to carry quality quartz.
LOVE THESE VIDEOS! Very helpful!! You should make a Granite Countertop everything you need to know video as well!
One thing that wasn't mentioned. since it had resin in the mixture, over time that resin will yellow anyplace that sunlight hits it... about 15 years down the road. My Autumn Foliage pattern formicastill looks the same 30 years later as they day I put it in. Holy cow.. at 60$ a square foot, my kitchen would be 4,500$ just for quartz countertops. I paid 2,500$ for my entire kitchen, countertops, cabinets, and all. Glad I built my house when I did.
This was very informative. I do have a question. Is quartz a good passive surface?
Hi. By "passive" do you mean less maintenance? If so, it does not require any sealing. Just regular cleaning as you would anything else. So, I suppose the answer is yes.
What is that temp in Fahrenheit?
Hi. Your videos are informative. I am planning to get a quartz countertop for kitchen. Other options are granite, nano glass and full body vitrified kitchen counter slabs. I have seen a brand Petrostone based in Pune, India. Brochure says it's made with Breaton Stone Technology from Italy. It mentions high grade quartz. It's economical compared to Caesarstone and Silestone and I can get Calacatta designs which I certainly can't with the premium brands. My question to you.
1. Is Petrostone a safe bet for quartz they give a 10 year warranty. Silestone is my 2 nd choice but can opt for a base grey shade and not the white ones
2. Should I consider full body vitrified tile...all designs available and very budget friendly
3. Is granite the safest bet. It's the most economical of the lot though I can go upto the grey shade of silestone
4. 3 cm slabs from Petrostone are placed to order while 2 cm slabs the only options from silestone. Is 2 cm thick slab sufficient or do we need 3 cm slabs
Once more thanks and waiting for your reply
Hi Michelle. Thanks for watching and leaving a comment.
Here's my opinion on your questions. Hope they help.
1. I have no experience with Petrostone. Although they use Breton tech, going up against Silestone or Caesarstone is tough. They have been in the industry for a long time and are two very trusted names. So personally I would probably go with your second choice.
2. I love vitrified tile, however I think large scale slabs are a better way to go. Have you considered porcelain slab?
3. I think granite is the safest bet overall in terms of durability and heat resistance. The only problem is you don't get a warranty on the material, only the finish (if it comes pre-sealed). At lease with quartz you do get a good warranty.
4. 3cm for sure. It's been the industry standard in North America for a long time.
@@MTKDofficial thanks. .
that was useful
I haven't seen these porcelain slabs here
We have 15 mm thick full body vitrified tile 240 x 80 cm which is an option for kitchen counter tops. But I feel they are prone to get chipped..
Looking forward to more videos
Brands of caeserstone and Silestone are only available at 20 mm here.
Main reason I considered Petrostone since I can order 30 mm
But guys here say 20 mm should be fine