@@nonokastle8699 I use my pony 812 on steep ground. it works fine (for mowing at least) but you have to steer using the brakes since the front wheels lift off the ground
Very nice to see it in action. Is this a Europe model? Which engine does it have? I also notice the rear lift arms are the ones for the reversible plow
This Pony was built in Marquette Lez Lille and has build number 38488 it has a petrol engine with Simca 9 clearly embossed. I have the ploughs and the balance tipping trailer complete with hay cradles.
Okay . I did conversions with Peugeot (Indenor) engines in the 80' . Some were done with Perkins . I knew one wich was done with a Audi 5 cylinders (by a mechanics) but too much stuff to do that , it was simply with the Peugeot. Have a nice day.
Nice job that cutter bar must be razor sharp
Pretty sweet , i might have a chance to pick one of them up
The mower sounds like a horse drawn one ....remember both from the 1950s.
Very efficiency job! With mythic pony812 ,i have the same, in brittany, but my field is not so flat, and i have to do more attention,.
We had some in French Alps , they don't really like steep ground , but they done the job.
@@nonokastle8699 I use my pony 812 on steep ground. it works fine (for mowing at least) but you have to steer using the brakes since the front wheels lift off the ground
Very nice to see it in action. Is this a Europe model? Which engine does it have?
I also notice the rear lift arms are the ones for the reversible plow
This Pony was built in Marquette Lez Lille and has build number 38488 it has a petrol engine with Simca 9 clearly embossed.
I have the ploughs and the balance tipping trailer complete with hay cradles.
Hello. With a Jeep and a Pony I would not pay your gasoline amounts !! ☺ Is it a M38. It seems like the Hotchkiss built in France Under license.
This jeep runs on diesel, I know not the model. It has a Peugeot engine.
Okay . I did conversions with Peugeot (Indenor) engines in the 80' . Some were done with Perkins . I knew one wich was done with a Audi 5 cylinders (by a mechanics) but too much stuff to do that , it was simply with the Peugeot. Have a nice day.
Il doit être bien réglé à vitesse qui coupe il ne doit avoir beaucoup de taupe on connaît ça 600mil fran ça comsomait beaucoup d essence et à la carte