I was like huh.. he 3d printed it.. most people doesn't have it home.. if he would have made from card board or so than he would realize how tough it is.. but than I went to older videos.. Ohh man He already did that.. Kudos.. Buddy.. well done..
Simply amazing! I am fairly new to the Arduino, and still learning the basics.This was a very inspiring example of what can be done with the Arduino, a 3D printer , and an App.
I actually enjoyed this more than other similar videos because it doesn't say DIY in the title lol I love 3D printers, they're just absent in my daily life xD
What would be cool is to add some coding so that you can set night hours for the clock so when it’s like 8 pm till 6 am (or what ever you set, it only lights up soft colors or dim colors or if possible dulls the leds
Very nice watch and wonderful work. Was also a lot of work to create the app, many thanks for your work, I wish you all the best. Now I have to build the clock too, says my wife and I want her to hang in the living room. Have to work for me again. First had to make our table with WiFi LEDs and Alexa.
Oh, that's good. That's REALLY good! About the only thing I'd add is to make the 7-segment's, uh, "segments" stand out better; there's a sort of "light bleed" between them and parts of the background. But outside of that, it's quite impressive, including the different displays (time, temp, etc.). "Ya done GOOD!" (And wouldn't ya know it? I left my 3-D printer in my other pants! But once I get it out I'll get RIGHT on it!) :)
Yeah I like it "except" for that light-bleeding. And I've seen other ones that too could use a bit of work to make or minimize that object's "bleeding," in both light and dark. And as I recall it's more evident in lighted rooms; my GUESS is that's because of the ambient light which makes the room brighter so the LEDs get dimmer in comparison. But that's really just a guess (although it happens to US ALL the time; The words ""snow blind" are there for a reason, after all.) It "seems" possible to remove some it, but it might not be a "trivial" fix. At one time I thought about building a clock just like that -- it seemed rather "simple." Yeah, right. Just LOOKING at the work Leon did and it's clear this ain't "simple" at all. (Hmmm, maybe THAT'S why I ask "Alexa" to find the time for me now.) ;)
Nice clock, my only concern would be you can not take it apart, so it is hard to service/expand. I would have attached the covers/diffusers to the back with screws so you can still access the LED's
Beste Leon, je project werkt nu ! Ik had in de tabbladen alleen de .h bestanden gezet maar er moeten ook de .ccp bestanden in gezet worden leerde ik later. Wel is een goede voeding nodig want alleen via de usb van de computer is hij steeds de bluetooth kwijt. bedankt voor jou projecten op internet (youtube)......
Very cool project! I reproduced it works on top! But I would like to add the control of the color and the brightness by wifi! It is possyble to have the commeande serial which send it since the module hs05
Thank you. You really perked my interest in this. Not only the electronics side but the 3D side. I am looking into the anet a8 as that seems to be the most fun to build and modify for some fun. I love the stuff you do, thank you very much. I wont be able to do so till maybe around xmas. Thanks again. Love that cnc machine and the 14 segment display. try the 16 segment and lets make a digital clock out of that. -Tom
Hello. I want to repeat your project. Tell me how to connect segments correctly? and especially the points. Can you draw a detailed diagram of the connection of the segments?
Awesome.. I'm always envy those perfect 3d prints, I have a ender 3 and almost always my prints have issues.. I upgraded the extruder, hotend, the bed, the mainboard, stepper drivers, cooling and yet I can't have consistent results.
Hello I got it working sir thank u I had to download Adafruit_sensor library and also I had to download Time_h library then it compiled Thank u very much now I’ll start 3D print the material Great project u always make professional I always watch ur video Thank u again and once am done I’ll share it here
lino jr hello I think there is no wire connection diagram but am trying to figure that out through the video by stopping it and playing it to see how he is wiring it
So awesome! Always wanted to print something like this. But kinda scared of dealing with the electronic brain aspect. Please make a video where you show how to build that.
what would be needed to change in the code to use twice the number of LED's so that each segment has 2 instead of one for the segments. for a larger display?
@@TA1FMY I couldn't find any. That was why I tried making a comment. Anyway, as you suggested, if I happen to find it I shall update under this comment
Hello, could you please help me to change the LED-settings in the code to make it work with 2 LED´s per segment? I tried almost everything, but I can´t get it to work. Thank you!
Hello brother.Thanks for uploading video and share codes I have made this clock it's working well but manual time setting button are not available.Can you edit code for time settings button code.please guide me.
I Still LOVE watching this to this day. Can't wait to give it a run. I will be ordering my anet a8 when I get my taxes back. Thank You so very much, this is awesome. BTW, have you thought about scaling this up for a bigger size on the bigger printers? I would love to see this on the anet a10
Hi, check the schema on GitHub: github.com/leonvandenbeukel/3D-7-Segment-Digital-Clock. On the other GitHub link there are files with the order of LED's: github.com/leonvandenbeukel/7-Segment-Digital-Clock. Good luck with your project!
hello my friend, it was a good work, I liked it very much.....I implemented your project too, but I have a problem.......when I turn on the white light, except for the lights that show the time, it turns white in those that should stay off...if we turn off the white, the unnecessary ones do not light up, but The light intensity of the burning parts is very low.. I applied the circuit diagram exactly. Can you give some advice ... I spent a lot of time, sorry I can't find the problem right now..
Awesome design. but please provide how assemble (Arduino, Bluetooth module as all parts). show me picture or video and of course where the android apps. as soon as reply
Hello , I have a compilation problem when I want to upload it to the arduino nano I have the Timer library installed but it tells me a lot of error messages like: "error: invalid use of template-name 'Timer' without an argument list " can you help me, please thank you
hi bro The code you upload is different from the code in your video what is the reason ? An error occurs while compiling on the Arduino please guide me . I'm an Arduino amateur
That is a lot of work put into this project. Great job!
This is one of the best clock I have ever seen. Earlier was also from the same author but this is truly amazing.
I was like huh.. he 3d printed it.. most people doesn't have it home.. if he would have made from card board or so than he would realize how tough it is.. but than I went to older videos.. Ohh man He already did that.. Kudos.. Buddy.. well done..
🙂👍
Simply amazing! I am fairly new to the Arduino, and still learning the basics.This was a very inspiring example of what can be done with the Arduino, a 3D printer , and an App.
I actually enjoyed this more than other similar videos because it doesn't say DIY in the title lol
I love 3D printers, they're just absent in my daily life xD
What would be cool is to add some coding so that you can set night hours for the clock so when it’s like 8 pm till 6 am (or what ever you set, it only lights up soft colors or dim colors or if possible dulls the leds
You could by coding in an LDR
Very nice watch and wonderful work. Was also a lot of work to create the app, many thanks for your work, I wish you all the best. Now I have to build the clock too, says my wife and I want her to hang in the living room. Have to work for me again. First had to make our table with WiFi LEDs and Alexa.
Why are some people so talented. I feel so inadequate sometimes... 😆 Great work, love it.
Phantomthecat I'm the same way.
Clock
Oh, that's good. That's REALLY good! About the only thing I'd add is to make the 7-segment's, uh, "segments" stand out better; there's a sort of "light bleed" between them and parts of the background. But outside of that, it's quite impressive, including the different displays (time, temp, etc.). "Ya done GOOD!"
(And wouldn't ya know it? I left my 3-D printer in my other pants! But once I get it out I'll get RIGHT on it!) :)
Yeah I like it "except" for that light-bleeding. And I've seen other ones that too could use a bit of work to make or minimize that object's "bleeding," in both light and dark. And as I recall it's more evident in lighted rooms; my GUESS is that's because of the ambient light which makes the room brighter so the LEDs get dimmer in comparison. But that's really just a guess (although it happens to US ALL the time; The words ""snow blind" are there for a reason, after all.) It "seems" possible to remove some it, but it might not be a "trivial" fix.
At one time I thought about building a clock just like that -- it seemed rather "simple." Yeah, right. Just LOOKING at the work Leon did and it's clear this ain't "simple" at all. (Hmmm, maybe THAT'S why I ask "Alexa" to find the time for me now.) ;)
Looks great! It could be redesigned to make as an easily from recycled materials, recyclable commercial product at a relatively low cost.
Nice clock, my only concern would be you can not take it apart, so it is hard to service/expand. I would have attached the covers/diffusers to the back with screws so you can still access the LED's
New improvement from previous project? Great job, bro 👍👍👍
Yes, thanks 😊
Hello,
I built this clock, it works fine. It was my first Arduino project, thank you Leon for your wonderful idea !
That's awesome mate.
Seems that I need to get 3D printer :)
Pawel Sikorski you and me both
Pawel Sikorski I'm getting one by christmas.
I got one just for this project, then I had seen and downloaded 3 more clock projects from thingiverse.
This is still amazing to watch.... Thank you Leon 😀
Beste Leon, je project werkt nu ! Ik had in de tabbladen alleen de .h bestanden gezet maar er moeten ook de .ccp bestanden in gezet worden leerde ik later. Wel is een goede voeding nodig want alleen via de usb van de computer is hij steeds de bluetooth kwijt. bedankt voor jou projecten op internet (youtube)......
That's a great project - kudos to you mate !
Erg mooi. I wonder how far you can stay from and still read it. It could be nice way to display time on the tower.
Very cool project! I reproduced it works on top!
But I would like to add the control of the color and the brightness by wifi!
It is possyble to have the commeande serial which send it since the module hs05
Thank you. You really perked my interest in this. Not only the electronics side but the 3D side. I am looking into the anet a8 as that seems to be the most fun to build and modify for some fun. I love the stuff you do, thank you very much. I wont be able to do so till maybe around xmas.
Thanks again. Love that cnc machine and the 14 segment display. try the 16 segment and lets make a digital clock out of that.
-Tom
Hello. I want to repeat your project. Tell me how to connect segments correctly? and especially the points. Can you draw a detailed diagram of the connection of the segments?
Awesome.. I'm always envy those perfect 3d prints, I have a ender 3 and almost always my prints have issues.. I upgraded the extruder, hotend, the bed, the mainboard, stepper drivers, cooling and yet I can't have consistent results.
Incredible !! So beautiful and it open the door for so much adaptations. Thank you for sharing it !
I'm gonna try a six digit, as soon as I get pricing quoates from the service, I have no 3d printer
Awesome, you really love electronics, excellent work!
Clock ki konsi wire ko laptop se joda please answer me
Really cool project! I'm thinking about building this clock, but can I control it also with a IPhone anyway? Or with a remote control on the arduino?
Very cool and clever, great job!
Nice man... It looks awesome
That's awesome, great work!
Hello I got it working sir thank u
I had to download Adafruit_sensor library and also I had to download Time_h library then it compiled
Thank u very much now I’ll start 3D print the material
Great project u always make professional
I always watch ur video
Thank u again and once am done I’ll share it here
hello sir,how about the led connection from 1 to 30.?
lino jr hello I think there is no wire connection diagram but am trying to figure that out through the video by stopping it and playing it to see how he is wiring it
Hey, did you figure out how to connect it? I am trying to make it atm and I am confised on how I should connect everything.
дайте пожалуйста полную схему соединения светодиодов, а так же как подключать точки??? И какие выводы подключать к arduino?
I made it,and I worked first time,I am very pleased. Thanks
Awesome!
I got confuse with the order of the led..any tips?
An amazing project.
Is it possible to set automatic switching between time-temperature and humidity ??
Awesome project!
Thanks 🙂
@@LeonvandenBeukel hello sir can you please tell me where I can find arduino coading
@@harshitrajsud9hridn Check the GitHub link in the description.
@@LeonvandenBeukel Its not in the repo
@@LeonvandenBeukel i will pay 20 dollars will you deliver it
Of i want use for outdoor vision, which type leds are best?
can it change automatic between clock and temperature?
heah
*Awesome project!*
_Willi's 3D-Druck_
THANK YOU FOR YOUR TIME AND EFFORT.
Great upgrade
So awesome! Always wanted to print something like this. But kinda scared of dealing with the electronic brain aspect. Please make a video where you show how to build that.
Hi, good suggestion, I might do that.
subbed
Hi! How to make the clock automatically switched from the clock to the temperature and back ?
Hello, please write the full layout of connecting the LEDs together.
how are points connected?
Hi Mr, can you tech me how to add 1inch 7segment with 74hc595 to display DATE permanently under the ws2812 CLOCK,thanks..🙏
Hello is there anyway for example that at 2pm the clock will read "2:00" Not "02:00" ? There has to be a code somewhere for that.
How can i change the code to display 0 on first digit(for eg 7:56 to 07:56).
Excellent
Can you share android app
Thanks
hello i have 7 LED per digits how can i modifie the code arduno for working ?
Aren't the dots in the middle supposed to blink in synchronization with the seconds on clock mode?
Wow! Cool project!
wow ziet er vet uit :D , nu wil ik er ook één
what would be needed to change in the code to use twice the number of LED's so that each segment has 2 instead of one for the segments. for a larger display?
Brilliant... is it Ok to use a ds1302... I don't have access to a Ds3231 at the moment 😞
Intelligent in Action! Thanks!
many thanks for this great clock is this support 12hr clock
You’re a genius man
Thats amazing! I wanted to build such a clock either for a year or so maybe with a led square matrix... Now i want to start the project ;D
Done?
Ciklez lmfao .......waiting........
How to Set Without Bluetooth & Humidity Sensor, What changes made in Code, plz Replay
Hi
Nice project
Can you help me to make it huge size
Around 24inch and 72 inch
The "Led holder / Backer" (seen at 00:21) seems missing from the STL folder of repository (GitHub)
if you find the stl, can u share with us, best regard!
@@TA1FMY I couldn't find any. That was why I tried making a comment. Anyway, as you suggested, if I happen to find it I shall update under this comment
my project was unsuccessful, how do I set the led RGB color ... thnks
Hola, actualmente, no está disponible la App para el reloj en PlayStore, dónde la puede conseguir?
How to change the code to display the temperature of 20.0C or 20.5C
Can you help me ?
my rgb leds are all on, there are several different color leds, how do you want to change it to a clock ... thanks
Molto bello il progetto, come mai hai deciso per un solo led a segmento e non due per segmento?
Hello. You can be asked to redo the app for the clock. When you start it gives many an error
ich finde die Uhr sehr gut ich habe aber Probleme mit der Programierung können sie mir da irgendwie helfen
I wonder if the hot glue melts with the heat from the LED? I saw a lot of creators use hot glue with the LEDs.
No that's no problem
Super travail , bravo !!
mobile application removed from play store, how can I now set time again, guide me please
Hello, could you please help me to change the LED-settings in the code to make it work with 2 LED´s per segment? I tried almost everything, but I can´t get it to work.
Thank you!
I did it if you want
@@zoomboom3003 Can you share your ino.firmware
but with 1 led per segment?
The original ino in the github is with one led per segment!!!
@@zoomboom3003 can you share your code with me ?
Can i have a circuit diagram With all component connections?
I don't know where to plug in the power because there's no power module like on your gifhub. Please show me how to plug the power
Nice works!
In deze hoogtijdagen van ESP Home en Home Assistant zou ik hier graag een deel twee van zien Leon.
Wow nice work. Can you please told me what 3d printer do you use the brand and type?
😢 Please can you tell me the applications and the softwares used in this clock
bro, cant download app for phone, link not working, can u upload it again?
Great project. Does anyone know how I can include the rainbow function instead of static colors?
how much price of this 3d printer
ı can't fin find program in google play store?How can ı download?
Hello brother.Thanks for uploading video and share codes I have made this clock it's working well but manual time setting button are not available.Can you edit code for time settings button code.please guide me.
Great work ! Thank you for that !
The app does not work properly. I open the App but cannot use. It's out automaticly. Pls advice. thank.
I Still LOVE watching this to this day. Can't wait to give it a run. I will be ordering my anet a8 when I get my taxes back.
Thank You so very much, this is awesome.
BTW, have you thought about scaling this up for a bigger size on the bigger printers? I would love to see this on the anet a10
can it be with 60 leds in 1 cell 2 leds ?
Very cool project! Do you know if you'll ever be sharing the Android code? Would be a great example of how to code both sides for BT. Thanks.
Leon, please put more detais to led wire connection.
Hi, check the schema on GitHub: github.com/leonvandenbeukel/3D-7-Segment-Digital-Clock. On the other GitHub link there are files with the order of LED's: github.com/leonvandenbeukel/7-Segment-Digital-Clock. Good luck with your project!
@@LeonvandenBeukel thanxs a Lot !!!
Why BtAPP not worked.always exit if connected hc05
Can you help abaout code? i want to change every 1minutes between clock, tempature and humudity.
hello my friend, it was a good work, I liked it very much.....I implemented your project too, but I have a problem.......when I turn on the white light, except for the lights that show the time, it turns white in those that should stay off...if we turn off the white, the unnecessary ones do not light up, but The light intensity of the burning parts is very low.. I applied the circuit diagram exactly. Can you give some advice ... I spent a lot of time, sorry I can't find the problem right now..
Hello, could you show me the arangement of led wiring. There are four digits and two dots. Each digit consist of 7 leds. From which led i start?
Check the github link in the description, there are pdf files with the order of LEDs
Hello, is it possible to have the application for Android. APK not available. Thank you
Juste merveilleux
Awesome design. but please provide how assemble (Arduino, Bluetooth module as all parts). show me picture or video and of course where the android apps. as soon as reply
Hello ,
I have a compilation problem when I want to upload it to the arduino nano
I have the Timer library installed but it tells me a lot of error messages like: "error: invalid use of template-name 'Timer' without an argument list
"
can you help me, please
thank you
is there an app for ios phones to connect to this clock?
Hi Leon,
Thank you for your excellent project. By the way how to control the clock if we don't have an android phone ? :)
Regards
Wow sir amazing project I like it am gunna gather the stuff and do it thank u very much for sharing
hi bro
The code you upload is different from the code in your video
what is the reason ?
An error occurs while compiling on the Arduino
please guide me . I'm an Arduino amateur
Thank you for share. I like that clock. I want print and make one.