The tightening pattern is criss cross. The torque spec is about 10nM (7 ft/lbs). Or German tight if your arm is trained enough 😉 Check out my other videos. I save and restore Classic German cars
Hi there. Super video you did, good ideea. I got also e36 318i '95 model and i try to fix..a lot at it after 4 years parking :D I want to ask how is the going and feel after gear box oil replacement? Thank and Regards, Dragos.
Great video, but the rear u joints do go bad sometimes. I had an 07 x3 completely let go of its rear joint. No replacement available. But no worries, you can buy An aftermarket driveshaft (the entire thing bc they won’t sell parts) for 500 👍🏾
Thanks for the tips. Old school Bimmers are a little better and stronger built. I haven’t seen u-joints go bad on them much. There’s also another option which is taking it to the driveshaft shop so they can rebuild it. I also work on classic Mercedes and they sell ujoints for those
good evening Vito, have you got idea how much oil need 316i 1.6l need for the auto gear? i just bought for my wife , but the morning i listen somethink like krits krits krits when she start to go, after seconds stop and run spesial. ..thanx for the video
If you hear a noise when you’re driving, it seems like something is rubbing against something. Check you driveshaft or brake dust shields. I don’t think the problem is with the transmission. But it’s a good idea to do the transmission fluid service anyways. For your transmission I would buy about 6 liters of oil
If you want more help, you can follow me on Instagram: vitosgarageyoutube. Send me a message there and videos and I can help you more if needed. Please check out my other videos and playlists. I upload new car videos every week🙂🤝
Hey so I drive a 93’ 318is coupe automatic. Currently trying to just put the atf fluid into the car due it draining out from when I took out the radiator. How would I be able to add this??
I have a 1998 328is with 166k miles and I’m not sure if the transmission fluid has ever been replaced (probably not) & I heard that changing it out with fresh fluid at that high of mileage can damage the transmission, is that true? Subscribed!!(:
Hi. Thank you so much for watching and supporting. And you must change it. Nothing will happen, just do the same procedure I did in the video. Drain the old fluid, remove both pans (preferably both and both pans have gaskets), clean the pans and mating surfaces, install new gaskets , put it back and refill it. I recommend to put 1 qt of Lucas Trans Fix additive along with new fluid. Make sure the car is level when jacked up and make sure to adjust the fluid level to the right one. Change your automatic trans fluid every 40k-50k miles and your trans will last forever. Also, check out my other videos and playlists. I have lots of car content. If you need any help or have car questions, follow me on social media and message me there🤝
It's a 1994 325i, so I think it has a GM trans in it. I don't think it's a ZF trans. What exactly are you trying to fix on yours? It's my friend's car. We got it last year because we wanted to save the car. It had a cracked cylinder head from someone overheating it badly. But we fixed her up. I have an E36 playlist you can check
Did I Mess Up? Attempting to Start a BMW E30 After Cylinder Head Replacement: th-cam.com/video/c0eV22abiHc/w-d-xo.html
Great video! I was just hoping to hear the bolts specs and tighten pattern.
The tightening pattern is criss cross. The torque spec is about 10nM (7 ft/lbs). Or German tight if your arm is trained enough 😉
Check out my other videos. I save and restore Classic German cars
Thanks VITO I am changing my transmission fluid on Saturday, What about the small pan can I do it too?
Yes, you can do the small pan too. There's a separate gasket for it
Hi there. Super video you did, good ideea. I got also e36 318i '95 model and i try to fix..a lot at it after 4 years parking :D
I want to ask how is the going and feel after gear box oil replacement?
Thank and Regards, Dragos.
It felt great after the trans fluid replacement. Thanks for watching and check out my recent videos!🤘
Thanks for showing the process. Why put oil in the pan if you are going to pump it in anyway?
Just faster and less pumping needed
Great video, but the rear u joints do go bad sometimes. I had an 07 x3 completely let go of its rear joint. No replacement available. But no worries, you can buy An aftermarket driveshaft (the entire thing bc they won’t sell parts) for 500 👍🏾
Thanks for the tips. Old school Bimmers are a little better and stronger built. I haven’t seen u-joints go bad on them much. There’s also another option which is taking it to the driveshaft shop so they can rebuild it.
I also work on classic Mercedes and they sell ujoints for those
good evening Vito, have you got idea how much oil need 316i 1.6l need for the auto gear? i just bought for my wife , but the morning i listen somethink like krits krits krits when she start to go, after seconds stop and run spesial. ..thanx for the video
If you hear a noise when you’re driving, it seems like something is rubbing against something. Check you driveshaft or brake dust shields. I don’t think the problem is with the transmission. But it’s a good idea to do the transmission fluid service anyways. For your transmission I would buy about 6 liters of oil
@@VITOSGARAGE thnanks brother, 6litr....also this noise stop...when she start the engine wait a minute and after start to go..thanx again.
If you want more help, you can follow me on Instagram: vitosgarageyoutube. Send me a message there and videos and I can help you more if needed. Please check out my other videos and playlists. I upload new car videos every week🙂🤝
What size ranch did you use?
Selam 94 model318i var otomatik şanzuman yagına nereden bakabilirim
Can you speak English?
Hi, i have 320 automatic e36 , how many liters for oil matic replacment ? need your advice
Buy about 8 liters, just in case you need extra
Hey so I drive a 93’ 318is coupe automatic. Currently trying to just put the atf fluid into the car due it draining out from when I took out the radiator. How would I be able to add this??
Everything is shown in the video, isn't it?
I have a 1998 328is with 166k miles and I’m not sure if the transmission fluid has ever been replaced (probably not) & I heard that changing it out with fresh fluid at that high of mileage can damage the transmission, is that true?
Subscribed!!(:
Hi. Thank you so much for watching and supporting. And you must change it. Nothing will happen, just do the same procedure I did in the video. Drain the old fluid, remove both pans (preferably both and both pans have gaskets), clean the pans and mating surfaces, install new gaskets , put it back and refill it. I recommend to put 1 qt of Lucas Trans Fix additive along with new fluid. Make sure the car is level when jacked up and make sure to adjust the fluid level to the right one.
Change your automatic trans fluid every 40k-50k miles and your trans will last forever.
Also, check out my other videos and playlists. I have lots of car content. If you need any help or have car questions, follow me on social media and message me there🤝
Thank pro from libya 👍
Thank you. Please subscribe. I have a lot of videos about cars☺🙌
What size is the filler screw?
It was a long time ago. 17mm I think
How is that car running without air sensor
ECM has a built in default to run without MAF, I think
Thinks bro
Gents what type of transmission is that?
Automatic
@@VITOSGARAGE I know but the model if that transmission?
I want to order some parts
It's a 1994 325i, so I think it has a GM trans in it. I don't think it's a ZF trans. What exactly are you trying to fix on yours?
It's my friend's car. We got it last year because we wanted to save the car. It had a cracked cylinder head from someone overheating it badly. But we fixed her up. I have an E36 playlist you can check