Quick question. I have the adaptor off shapeways and the nozzle it recommends but not getting any shots even at 150psi just venting. Any suggestions, also what psi are you at?
So when the bolt goes foward it just vents air, also on dry firing ? It does not fire full auto or anything? Can you film this? I am using 200psi. When I have had that venting problem usually is caused by double feeding. Is there couple bbs in the chamber when the venting has happened?
@@PalsuAirsoft yeah I'll get a video after work. I'll try going to 200 psi. I tried the metal shapeways nozzle and the plastic one thats recommended on the adaptor. It does it on semi or full no bbs. Sadly now my valve on top of the mag is leaking when ever I plug air in too, I think it needs cleaned is all. Are you by chance on the fb uzi owners page?
@@PalsuAirsoft some times it sputters when pulling the trigger similarly to when a co2 mag is about out of gas and the bolt isn't going all the way back. I tried an fps rudder and swapping nozzles again to no avail sadly and swapped to a mag that was not leaking.
@@JefeAirsoft sure. Basically i designed a adapter block that combines an aeg mp5 drum mag and hpa tap. the bbs and gas have their own routes inside the block and then the whole thing screws in to the bottom of the magazine. I could have done a magwell instead like any other hpa adapter to a gbb but the magazine is already bit long so i opted for a drum instead.
@@PalsuAirsoft yes I’m but I’m looking for one for the UZi and there aren’t any that exist. Can you go into more details so I can replicate his design ?
I basically designed an adapter block that uses an aeg mp5 drum mag and then i added the hpa tap to it. The whole thing then screws in to the bottom of the mag.
Holy cow, no obnoxious hitmarkers? Good video.
Well im kinda lazy adding hit markers anyway so its a win win.
No nyt on nätti!
This is what I am talking about
Quick question. I have the adaptor off shapeways and the nozzle it recommends but not getting any shots even at 150psi just venting. Any suggestions, also what psi are you at?
So when the bolt goes foward it just vents air, also on dry firing ? It does not fire full auto or anything? Can you film this? I am using 200psi. When I have had that venting problem usually is caused by double feeding. Is there couple bbs in the chamber when the venting has happened?
@@PalsuAirsoft yeah I'll get a video after work. I'll try going to 200 psi. I tried the metal shapeways nozzle and the plastic one thats recommended on the adaptor. It does it on semi or full no bbs. Sadly now my valve on top of the mag is leaking when ever I plug air in too, I think it needs cleaned is all. Are you by chance on the fb uzi owners page?
@@180molotov no im not. There is an o-ring in the mag that usually gets crushed and causes the air leak(R04 in the explosion view).
@@PalsuAirsoft th-cam.com/video/4y9no154ftQ/w-d-xo.html tried 3 different mags now sadly
@@PalsuAirsoft some times it sputters when pulling the trigger similarly to when a co2 mag is about out of gas and the bolt isn't going all the way back. I tried an fps rudder and swapping nozzles again to no avail sadly and swapped to a mag that was not leaking.
Where did you get the drum mag? Where can I get one?
I made it and i am not really selling them.
@@PalsuAirsoft can you tell me how you made it?
@@JefeAirsoft sure. Basically i designed a adapter block that combines an aeg mp5 drum mag and hpa tap.
the bbs and gas have their own routes inside the block and then the whole thing screws in to the bottom of the magazine.
I could have done a magwell instead like any other hpa adapter to a gbb but the magazine is already bit long so i opted for a drum instead.
And if you are looking a drum mag for a gbb pistol there should be some in the market where you can just change the fill valve to a hpa tap.
@@PalsuAirsoft yes I’m but I’m looking for one for the UZi and there aren’t any that exist. Can you go into more details so I can replicate his design ?
.
I basically designed an adapter block that uses an aeg mp5 drum mag and then i added the hpa tap to it. The whole thing then screws in to the bottom of the mag.
@@PalsuAirsoft Could make a vid on that. Not much mods out here on the KWC mini uzi