I know this is a few years old now, but I have never read so many troll, arse comments on this mans work, ever! This man know his stuff ok, I have been building and staining maple tops over the years and this man has got it, mad it simple and accesable without the "Hey, look how crazy I am" crap video's usualy posted nowadays. So glad I dont post any of my work on TrollTube. This man's work is excellent and deserves a little respect, and thanks. Just about to give my 336 build the same treatment. Many thanks, John Willis
This wood is quilted Bigleaf Maple and grows in the northern California and southern Oregon coast. The best specimens have this tubular look to the grain. The stains or dyes used on it make the grain more visible and the finishing techniques used can highlight the grain to the max if done effectively. It is certainly a beautiful piece of wood.
What I use now is a fine grit sanding sponge with only light sanding. When I have 3 coats of clear on the amber, I sand it well to prepare for the burst color.
It is Stew-Mac red mahogany. It is quite dark but transparent over the amber it looks good. A regular red will look orangish as the amber reflected is filtered through the red over it.
Your voice reminds me of that guy Bob Ross on the TV Painting show. Very relaxing. I just watched a 13 minute video and wish I still smoked pot. You are gifted man. Gorgeous work.
I can't even tell you what the compressor brand is...I've had it a long time and used it in the shop. What is important is a good moisture filter. I like pot sprayers because it is what I am used to. They are a little harder to control than an airbrush but I've used them a long time as well.
I use nitrocellulose lacquer but poly is fine as long as you use it all the way through. I do the base color (in this case amber) then clear over it followed by the burst color (in this case red) and then the final coats of clear.
Without seeing it myself, I'd stain the damaged area and then build up clear lacquer to fill the spot. Lacquer shrinks so you'll have to put more on than you think to eventually get a level finish. The gloss lacquer will give you the matching finish you want. Wait a few weeks before you sand and polish so the lacquer is nice and hard.
@gayouj If the binding follows one level contour around the body then it's easier to just rout the binding channel before carving the top, whilst the top is still flat. Then all it takes is to cut the channels on a router table or with a handheld router with an offset base (teardrop shaped with a handle at the narrow end). You can make floating router jigs to follow contours - like on archtops or acoustics - but for most solidbodies, it's not necessary.
man the razor blade thing brought back a horrible flashback for me lol. i painted a guitar once and had a run. used polycrylic clear and waited 3 days, well apparently it wasnt cured and when i touched it it dug all the way to the primer. man i was pissed. anyway, that sucker is gorgeous man
If you are wanting to color the wood, you need to strip it down to bare wood and then use the vintage amber etc. If you are doing a vintage amber burst, then just fine sand your guitar and do the burst and follow with clear to seal it all up.
@and1424 gibson first stains the lighter color of their bursts by hand then they spray the outside colors ... gibsons process is almost exactly like the one used in the video except gibson waits until every coat of finish is applied before they scrape the binding
if you were going to stain a guilted maple body a different color than sunburst, would you still use a vintage amber if you were going to stain the top a blue? i was just curious what color stain you'd use to bring out the grain if you were going to stain a a blue or something thats not a warm color. thanks.
I do this because sometimes I'm not happy with the burst spray job...the density and the evenness of it so I like to put some clear over the amber so I can sand off the burst and still retain the amber without having to start all over from the beginning. I guess if I did spraying all day long, I'd be more practiced and more confident.
If the color is gone all the way down to the wood with the chip then you need to put the color back. If it's just the clear coat that is chipped, just put the clear back. Lacquer takes time to really cure. I allow a couple of weeks before I buff a guitar.
@KingBlossomGuitars yah its all the way down to the wood theres no paint on that spot so if i use black woodstain thats the color of the rest of the guitar and after like 5 or 6 coats let dry then use lacqure? and do they have woodstain with gloss in it?
I can't imagine getting a nice fade of the red with a brush. It could be done at the same time without the clear coats in between, but I don't have that kind of confidence yet. Maybe you could experiment with dye application techniques and blend it in right at the beginning.
My telecaster have a clear lacquer seal, if i use the vintage amber on it it will works like in your case? is very important to know it in order to use your technique please...
@KingBlossomGuitars Hello, i just want to give the brightness that the guitar get with the Vintage Amber, with no Burst, (the first step that you make) the point is that my guitar have already a finish on it but i think is just a small coat of clear lacquer, is not a virgin wood, so you recommend to take that coat of lacquer, not putting vintage amber on it? thanks
Hi, that's a beautiful burst. Do you have the models of paint gun and compressor you used, by any chance? Also, what is the spray gun nozzle gauge, and the approx size of the compressor?
@KingBlossomGuitars also if i wanted to fix a paint chip in the guitar would i use glossy wood stain then use lacquer after a couple coats of the wood stain? also would i have to use primer? PS i heard WOOD STAIN WITH GLOSS WOULD NOT WORK
Hi. Great video and fantastic colours! Just wondering if the red dye can be hand applied as well and then if it would have to be done at the same time as the yellow/amber? Any tips would be greatly appreciated.
hey mate. thanks for sharing. look, i want to clear coat my telecaster. what do you suggest? after sanding, can i directly apply the clean coat? do i have to wet sand again and do another coat? how it works the process? thanks
I have a Les Paul where the binding is kind of sharp where my forearm goes across. Would it be safe to use the scraping method you used to try to smooth it down, or, should I bring it to a luthier? It's not a highly-collectible version, merely 2007 ebony finish...
@KingBlossomGuitars hi, you seem to be a pro so i hope you can answer this question: for a black burst, would you put some coats of clear lack on it and then put on black or put on a slight black first, then some coats of clear lack and then "burst" it with black?
Everything affects the sound but I don't think it will affect it much if it's not very thick. Be careful to not put lacquer over something else because you might damage the underlying finish. Also, if the the finish is satin, let's say, the clear over it won't make it clear.
@KingBlossomGuitars did you paint it with woodstain and after you did a couple coats did you wait for it to dry then add a couple coats of lacquer? and ps does lacquer make it so the paint wont chip like if your fixing a paint chip on a guitar
Fantastic video. Would you be willing to share you technique for doing the body binding considering that your tops are carved? Are you using some special base for a router to keep it level or chiseling the material out by hand? Thanks!
When you do these type of videos, it would have been nice to insert a still photo of the results of the progress at each step and one of the end result. I mean, I just watched you dye/lacquer the back & sides in black but never saw the end results until this video when you flipped the body over!
I plan on making a guitar with the help of your videos. I am wanting to put an inlay design on the body of the guitar. Should I stan it and Lacquer it then route out where I want the inlays to be or would I route it, put the inlays in and tape over the inlays to paint the body? Your videos are very good and you make some fine guitars. Thanks
so what was the overall process for the back of the guitar? did you put a sealer first, then the dye sanding it a couple of times and then the clear coats? i want to do the same to a bass im building but on the front as well. really appreciate if you send me instructions
Man , can you explain me please what is that you applied on the body ? What is that solution that made the guitar more orange and made the lines look better ? Water based... I don't really understand , maybe because of my bad computer I can't hear correctly . Can you please tell me what solution is and what effect has on the wood ? Thanks a lot :)
I know this is a few years old now, but I have never read so many troll, arse comments on this mans work, ever! This man know his stuff ok, I have been building and staining maple tops over the years and this man has got it, mad it simple and accesable without the "Hey, look how crazy I am" crap video's usualy posted nowadays. So glad I dont post any of my work on TrollTube.
This man's work is excellent and deserves a little respect, and thanks. Just about to give my 336 build the same treatment.
Many thanks, John Willis
He definitely gets points for not starting off with "Wassup guys".
Great job! That quilt is beautiful! Thanks for sharing.
Beautiful work. I am deeply impressed.
Wow! That pattern/finish is a beauty.
Fantastic! And what a gorgeous piece of quilt you've got there !
Not exactly sure I followed the entire procedure but the end result was truly a thing of beauty. Thanks for sharing.
That is beautiful work. Thanks for sharing
That is one gorgeous looking guitar.
Thanks for posting videos like this. Please keep em coming..
Oh my God you do beautiful work. Way to go and thanks for sharing.
Beautiful work sir.
wow ! wasnt expecting that, the back of that axe is amazing !!!! great job, that thing is beautiful !
Beautiful work!
Excellent craftsmanship.
Great work. You make it look easy!
beautiful
Beautiful piece, thanks for sharing.
This wood is quilted Bigleaf Maple and grows in the northern California and southern Oregon coast. The best specimens have this tubular look to the grain. The stains or dyes used on it make the grain more visible and the finishing techniques used can highlight the grain to the max if done effectively. It is certainly a beautiful piece of wood.
great video, and thanks for sharing. looks like a very effective technique you have.
that is a beautiful guitar.
That's a beautiful piece of wood - I liked both sides.
Yes, it was a sweet piece
What I use now is a fine grit sanding sponge with only light sanding. When I have 3 coats of clear on the amber, I sand it well to prepare for the burst color.
@KingBlossomGuitars thanks a lot. that thing's gonna be a beauty
Dark brown/black looks great with a sunburst face. Great job.
beautiful job!
Que hermosa guitarra!
Me encantó el, el Arce de atrás y el modelo... Y el color quedó perfecto!!!
beautiful piece of timber
Thank you, nice style of finishing.
Its a delicate procedure for sure man. If the paint isnt 100% cured you can expect a respray.
It is Stew-Mac red mahogany. It is quite dark but transparent over the amber it looks good. A regular red will look orangish as the amber reflected is filtered through the red over it.
Awesome information!
U scraped me some goosebumps..
Your voice reminds me of that guy Bob Ross on the TV Painting show. Very relaxing. I just watched a 13 minute video and wish I still smoked pot. You are gifted man. Gorgeous work.
The wood is called Bigleaf quilted maple and grows on the Pacific Northwest coast.
Oh god that sound when he's scraping!!! the agonyy!!!
@blueturtleman1 Same here. I was looking forward to seeing the finished product.
Love that body style.
that maple is RIDICULOUS!!
It's magic!
Good work!!!
I use McFadden's now available under the Seagrave Coatings label as 'guitar lacquer'
great video
I can't even tell you what the compressor brand is...I've had it a long time and used it in the shop. What is important is a good moisture filter. I like pot sprayers because it is what I am used to. They are a little harder to control than an airbrush but I've used them a long time as well.
I use nitrocellulose lacquer but poly is fine as long as you use it all the way through. I do the base color (in this case amber) then clear over it followed by the burst color (in this case red) and then the final coats of clear.
nice job !
Without seeing it myself, I'd stain the damaged area and then build up clear lacquer to fill the spot. Lacquer shrinks so you'll have to put more on than you think to eventually get a level finish. The gloss lacquer will give you the matching finish you want. Wait a few weeks before you sand and polish so the lacquer is nice and hard.
@gayouj If the binding follows one level contour around the body then it's easier to just rout the binding channel before carving the top, whilst the top is still flat. Then all it takes is to cut the channels on a router table or with a handheld router with an offset base (teardrop shaped with a handle at the narrow end). You can make floating router jigs to follow contours - like on archtops or acoustics - but for most solidbodies, it's not necessary.
@KingBlossomGuitars You don't need to use a brush. Using a rag to rub on a burst can make some very nice looking fades.
@Prostheta Duh. I can't believe I didn't think of that. Thanks for the sanity check, bro.
I'm not applying too much actual material, it's fairly low volume. I've done it enough to tell when I'm getting too much on and am going to get a run.
man the razor blade thing brought back a horrible flashback for me lol. i painted a guitar once and had a run. used polycrylic clear and waited 3 days, well apparently it wasnt cured and when i touched it it dug all the way to the primer. man i was pissed. anyway, that sucker is gorgeous man
If you are wanting to color the wood, you need to strip it down to bare wood and then use the vintage amber etc. If you are doing a vintage amber burst, then just fine sand your guitar and do the burst and follow with clear to seal it all up.
@and1424 gibson first stains the lighter color of their bursts by hand then they spray the outside colors ... gibsons process is almost exactly like the one used in the video except gibson waits until every coat of finish is applied before they scrape the binding
That scraping! Dude!
if you were going to stain a guilted maple body a different color than sunburst, would you still use a vintage amber if you were going to stain the top a blue? i was just curious what color stain you'd use to bring out the grain if you were going to stain a a blue or something thats not a warm color. thanks.
That is Colortone concentrated liquid stain.....it's the only one I've found that doesn't have a bluish cast to it when you sand it down.
I do this because sometimes I'm not happy with the burst spray job...the density and the evenness of it so I like to put some clear over the amber so I can sand off the burst and still retain the amber without having to start all over from the beginning. I guess if I did spraying all day long, I'd be more practiced and more confident.
If the color is gone all the way down to the wood with the chip then you need to put the color back. If it's just the clear coat that is chipped, just put the clear back. Lacquer takes time to really cure. I allow a couple of weeks before I buff a guitar.
Im getting a quilted top and I was wonder can I just sand and start painting with the quilt design still showing? Or do I need to do another method
tyvm very helpful to my hobbies
if there is a sealent on the top would i need to sand that off before stainging?
@KingBlossomGuitars yah its all the way down to the wood theres no paint on that spot so if i use black woodstain thats the color of the rest of the guitar and after like 5 or 6 coats let dry then use lacqure? and do they have woodstain with gloss in it?
Mahogany body, bigleaf quilted maple top, 120-1000 grit sandpaper for sanding wood....up to 2000 for lacquer
Nice job, this method could be used for all burst finishes!
I can't imagine getting a nice fade of the red with a brush. It could be done at the same time without the clear coats in between, but I don't have that kind of confidence yet. Maybe you could experiment with dye application techniques and blend it in right at the beginning.
My telecaster have a clear lacquer seal, if i use the vintage amber on it it will works like in your case? is very important to know it in order to use your technique please...
I do. King Blossom custom guitars.
@KingBlossomGuitars Hello, i just want to give the
brightness that the guitar get with the Vintage Amber, with no Burst,
(the first step that you make) the point is that my guitar have already a
finish on it but i think is just a small coat of clear lacquer, is not a virgin
wood, so you recommend to take that coat of lacquer, not putting vintage amber on it? thanks
Hi, that's a beautiful burst. Do you have the models of paint gun and compressor you used, by any chance? Also, what is the spray gun nozzle gauge, and the approx size of the compressor?
@KingBlossomGuitars also if i wanted to fix a paint chip in the guitar would i use glossy wood stain then use lacquer after a couple coats of the wood stain? also would i have to use primer? PS i heard WOOD STAIN WITH GLOSS WOULD NOT WORK
@KingBlossomGuitars thx
These are all done in my shop
Hi. Great video and fantastic colours! Just wondering if the red dye can be hand applied as well and then if it would have to be done at the same time as the yellow/amber? Any tips would be greatly appreciated.
Yes, stain won't penetrate well if the wood has some kind of sealer on it.
hey mate. thanks for sharing. look, i want to clear coat my telecaster. what do you suggest? after sanding, can i directly apply the clean coat? do i have to wet sand again and do another coat? how it works the process? thanks
I have a Les Paul where the binding is kind of sharp where my forearm goes across. Would it be safe to use the scraping method you used to try to smooth it down, or, should I bring it to a luthier? It's not a highly-collectible version, merely 2007 ebony finish...
I've had my problems as well but I the only way I've found to get a run completely flattened is to use a razor blade.
@KingBlossomGuitars hi, you seem to be a pro so i hope you can answer this question: for a black burst, would you put some coats of clear lack on it and then put on black or put on a slight black first, then some coats of clear lack and then "burst" it with black?
Everything affects the sound but I don't think it will affect it much if it's not very thick. Be careful to not put lacquer over something else because you might damage the underlying finish. Also, if the the finish is satin, let's say, the clear over it won't make it clear.
Thanks for the video. One question though: why do clear laquer after the amber instead of after the guitar is fully painted and laquer it all at once?
@KingBlossomGuitars did you paint it with woodstain and after you did a couple coats did you wait for it to dry then add a couple coats of lacquer? and ps does lacquer make it so the paint wont chip like if your fixing a paint chip on a guitar
Fantastic video. Would you be willing to share you technique for doing the body binding considering that your tops are carved? Are you using some special base for a router to keep it level or chiseling the material out by hand?
Thanks!
I always wonder how wood grain get's that "wave" like pattern when it goes through wood shop
When you do these type of videos, it would have been nice to insert a still photo of the results of the progress at each step and one of the end result.
I mean, I just watched you dye/lacquer the back & sides in black but never saw the end results until this video when you flipped the body over!
I plan on making a guitar with the help of your videos. I am wanting to put an inlay design on the body of the guitar. Should I stan it and Lacquer it then route out where I want the inlays to be or would I route it, put the inlays in and tape over the inlays to paint the body?
Your videos are very good and you make some fine guitars.
Thanks
why did you seal the amber before spraying the read? I thought you seal, and lacquer after staon coats. looks great btw
nice..I've always wanted to know how it's done...
that is an outstanding job sir,quick question,Are these autobody transparent lacquer is a good solution on electric guitars as a clear coat?
pleease answer... is there a reason u dont put black on the front also because wouldnt that have a good contrast with the yellow if u sand it down?
so what was the overall process for the back of the guitar? did you put a sealer first, then the dye sanding it a couple of times and then the clear coats? i want to do the same to a bass im building but on the front as well. really appreciate if you send me instructions
do you have an exaust fan in there, i don't hear it? if so what kind and how does yours work? thanks!
I used to but I've found it to be unnecessary because I'm going to scrape it later anyway.
Nice job. Do you know how Gibsons Standard Faded are painted ? Do they use airbrush ? This low preassure one or just a paint brush ? Thanks!
Man , can you explain me please what is that you applied on the body ? What is that solution that made the guitar more orange and made the lines look better ? Water based... I don't really understand , maybe because of my bad computer I can't hear correctly . Can you please tell me what solution is and what effect has on the wood ? Thanks a lot :)
Really beautiful work! Can I ask what type and colour of dye you used for the back?
what type of lacquer do you use??? everyone keeps on skipping that step
@KingBlossomGuitars Where did yo get the vintage amber paint?
What kind of clear coat/sealer?
Could you tell me what PSI and paint you use for the red please? thanks
Master what used recessed ink with which