Install A 6 Hour Timer To Control Your Home Depot Halloween Skeletons Led Eyes

แชร์
ฝัง

ความคิดเห็น • 4

  • @LordSStorm
    @LordSStorm 5 วันที่ผ่านมา

    Great video! I have a bust head that has LED eyes that light up when you press the button. Do you have any idea how to modify it so I could plug it into the wall?

    • @skweekymagee
      @skweekymagee  4 วันที่ผ่านมา +1

      If you're going to be using it indoors get a USB cord in the length that works for you and cut off one end close to the connector.
      Take the cut side, strip the ends, and splice into the 2 wires coming off the battery compartment inside the head. Run the cable out as needed.
      Now use the other side of the USB cable and plug it into the wall using a USB phone charger/power brick. All you need is a cheap 5v one like this: a.co/d/akwnKOP
      You could also solder into the battery compartment and notch the battery lid for the wires to exit. I do this with many small battery powered decorations.
      Note the polarity coming from the battery box. If you have it wrong the leds won't light up so test before making the connections final.
      Do NOT keep the batteries installed if using it plugged into the wall

    • @LordSStorm
      @LordSStorm 4 วันที่ผ่านมา

      @@skweekymagee Any chance you have a similar video?

    • @skweekymagee
      @skweekymagee  4 วันที่ผ่านมา

      @@LordSStormI do not but there are many on here. Something like this:
      th-cam.com/video/1vNWQzMeiNM/w-d-xo.htmlsi=pBqJH9ohdR0kJ_NY