I see the same. Not speed but consistency make for best trip times, and they won't tear anything up. I like the way the lead tong hand looks up to make sure the line the tong hangs for doesn't get fouled in the travel block or sheaves before latching the around the stump. Good crew. Good, safe practices and behavior. I buy the guys a beer after tour.
That's what I'm talking about. Complete lyrics together. No wasted movements. You can feel the connection in this crew. Yes, we did ride the blocks up and down from the board.
Team work baby, if you get a good team, you can do alot of work in a 12 hour shift. Refineries have oil 🛢️ to refine, because of Rough necks that work day in and day out, Rain 🌧️ snow ❄️ or shine, we have ⛽ gasoline because of hard working Rough necks like them. 🙏🙌👏👏👏👏👏👏👏👏👏👏
Посмотрел с большим удовольствием,вспомнил бурную свою молодость,когда был и верховым и помбуром и бурильщиком и ст.бур мастером.Вот было времечко 60,70,е годы. Хорошо ребята работают,четко.Все зависит от команды,у нас было так же,только вместо цепи,толстый манильский канат.А так всё то же и ключи крокодилы и элеватор и серьги и ГИВ и тормоз на лебедке и команда лихих,чуть чекнутых.Как сказал один мужик проверяющий И ЗА МИЛЛИОН НЕ СТАЛ БЫ РАБОТАТЬ НА БУРОВОЙ,а нам нравилтсь
Сегодня за такую работу начиная с ковидом …работают только полные неудачники…те которые вонючие в командировке на две недели …пока его жену пилят дома))) работа эта адская …обесценились в долларах в Штатах.. те кто не хочет учится чему то новому и ьухают - вот те на ригах ссаных ))) ноу Мани там….и в Штатах и в Канаде - работа на риге шляпа . Не в обиду матерым рукастым
😂😂 been there done that. After breaking out on a Double in NM, after all Triples in The Permian Basin. Drilling for MGF when they filmed Waltz Across Tx on our Rig. My crew and I have a small Clip in the movie. I has a chance to drill on a 20+ thousand foot Rig, had an Elevator to the floor, I didn't take it cause I'd be drilling Morning Tower and I was working Relief Shift with MGF, plus these Deep Hole Rigs I got bored, Drilling maybe not. I wasn't to fond of Scrubbing 🤪😀😀
Men build, women move in. Men run the race, women stand at the finish line and pick the winners. Where are all the strong independent women who don't need no man?
...to shear off his fingers. In Germany and other European countries it is forbidden to spill the chain after there have been too many accidents. Usually there are power tongs that do this, or better yet an iron roughnek. When I started working on drilling platforms in 1985, I often saw colleagues with missing fingers.
They work good together, smooth, got a good flow. 👍
Those fellow 's are making money for that drilling company,Hell of a hard working crew.
Hasn’t changed at all since I did this as a summer job while in college in 1977. Helped pay for my geology degree. Best “class” I ever took!!!
Consistent and smooth, same same all night till it’s done!
I see the same. Not speed but consistency make for best trip times, and they won't tear anything up. I like the way the lead tong hand looks up to make sure the line the tong hangs for doesn't get fouled in the travel block or sheaves before latching the around the stump. Good crew. Good, safe practices and behavior. I buy the guys a beer after tour.
Like a well oiled machine.
Good team work i was very fast at the chain on the floor . These are the fastest I've seem on utube
I like the smoothness of there team work.
👍
Now those are roughnecks! Doing it the same way we did back in the 70's. Derrick hand used to ride the elevators to get to the board and back though.
That's what I'm talking about. Complete lyrics together. No wasted movements. You can feel the connection in this crew. Yes, we did ride the blocks up and down from the board.
Team work baby, if you get a good team, you can do alot of work in a 12 hour shift.
Refineries have oil 🛢️ to refine, because of Rough necks that work day in and day out, Rain 🌧️ snow ❄️ or shine, we have ⛽ gasoline because of hard working Rough necks like them.
🙏🙌👏👏👏👏👏👏👏👏👏👏
Kudos to all these hardworking men ❤❤❤❤
3 wraps on the chain I'm impressed!!! Good job nice and smooth!!!😅😅😅😅
Los trabajadores petroleros aman lo que hacen por eso con su experiencia se le hace tan sencillo. Lindo el trabajo petrolero. Apalusos
Looks like a nice maintained rig. 😎👍
Nice job guys, thank you!
Посмотрел с большим удовольствием,вспомнил бурную свою молодость,когда был и верховым и помбуром и бурильщиком и ст.бур мастером.Вот было времечко 60,70,е годы. Хорошо ребята работают,четко.Все зависит от команды,у нас было так же,только вместо цепи,толстый манильский канат.А так всё то же и ключи крокодилы и элеватор и серьги и ГИВ и тормоз на лебедке и команда лихих,чуть чекнутых.Как сказал один мужик проверяющий И ЗА МИЛЛИОН НЕ СТАЛ БЫ РАБОТАТЬ НА БУРОВОЙ,а нам нравилтсь
Сегодня за такую работу начиная с ковидом …работают только полные неудачники…те которые вонючие в командировке на две недели …пока его жену пилят дома))) работа эта адская …обесценились в долларах в Штатах.. те кто не хочет учится чему то новому и ьухают - вот те на ригах ссаных ))) ноу Мани там….и в Штатах и в Канаде - работа на риге шляпа . Не в обиду матерым рукастым
Now that's a good chain hand!
Real hard work for those two: how long do they trip like this? Several hours? Tough guys.
At least 12 hrs on a good day🥵
Hot brakes when you get to bottom running that fast...no hydromatic or eaton brake
Hi bro...nice and good working
Pretty good tripping btw
Did this in the North Sea off Aberdeen for 2 years in 79/80 on Rig 9 !… 12 hour shifts, 2 weeks on 2 weeks off, It was hardy work to say the least.
good job 💪
best team!!
Met some good hands down there we had triples in montana
I worked on Brinkerhoff in Montana, Derricks.
That is how you fucking trip pipe on a double rig west Texas and new mex fucking sweet getting it
😂😂 been there done that.
After breaking out on a Double in NM, after all Triples in The Permian Basin.
Drilling for MGF when they filmed Waltz Across Tx on our Rig.
My crew and I have a small Clip in the movie.
I has a chance to drill on a 20+ thousand foot Rig, had an Elevator to the floor, I didn't take it cause I'd be drilling Morning Tower and I was working Relief Shift with MGF, plus these Deep Hole Rigs I got bored, Drilling maybe not.
I wasn't to fond of Scrubbing 🤪😀😀
Men build, women move in. Men run the race, women stand at the finish line and pick the winners. Where are all the strong independent women who don't need no man?
Seen so many of these videos, but what's the chain for? Thanks, respect!
Too screw the pipe together.
Goid Crew, BUT Thats a Double, good for maybe 9k'
Is that a Kelly rig??? Never thought I’d see one again
Balance those damn tongs out GEEZ
What happened at 4.50 and 7.00 ?
What is the weight indicator reading?
Hook load
Take care bro
Why The handles Hand Break on Driller NOT PUT SAFETY CHAIN ...??
( Nobody Knowles , Potential DROP OBJECT THE TRAVELLING BLOCK OR TOP DRIVE )
#DANGEROUS#
For what is the chain?
Screw the pipe together
What is the chain for?
Looks like it spins ghe upper part to screw it on to the lower part. I'm sitting here working it out toi
...to shear off his fingers. In Germany and other European countries it is forbidden to spill the chain after there have been too many accidents. Usually there are power tongs that do this, or better yet an iron roughnek.
When I started working on drilling platforms in 1985, I often saw colleagues with missing fingers.
@gretareset6016 yeah this doesn't surprise me at all
Chain gang
anyone else watching that weight guage when he lifts the brake?
No shit!
Бурила с сигаретой 😢
Где АКБ?
Drillers being fucking cheap with those blocks tho
These journeymen should get free gas cards for life. Have to do the time. Trump.
Well trump could've done it when he was president so quit drinking buddy
Seandai nya di indonesia ada