Thats because you have never used a big machine like he is. When mud and dirt are that heavy and you have that much volume you have to spray an area then allow the water to work and run then come back. People who do this all day just naturally wash like he is because its faster and you actually get the surface properly rinsed. The top down slow one pass doesn’t rinse it and you learn that quick when your the one on the gun.
@@strosdetailingchannel he did pre wash it, that’s why he snow foamed it, how else are you meant to get the dirt off. He’s just done a contactless wash and you say he’s wrong? 😂😂
Why are you washing dirty water over the area that has been wash sprayed down already? Top to bottom would be more efficient. Washing it down with plain water first would have taken most of that crap off with no soap
When washing a vehicle using conventional methods you firstly apply soap, wash using a sponge or a broom and then rinse off with water from the top to the bottom. Touchless washing is a bit different. Soap is applied through a high pressure foamer and then high pressure water is used as a “sponge or a broom”. The water is worked back into fresh soap, either from the bottom to the top or backwards in the case of trucks and trailers etc. In this way, the soap is used more efficiently. (If you wash from the top down, you would simply wash the soap off the vehicle which defeats the purpose). Then rinse from the top down to finish the cleaning process.
For anyone ranting and raving, that he should be rinsing top to bottom. In this case, you are wrong. You rinse bottom to top with these types of products to get the full cleaning power, you are activating the chemical reaction which is what removes most of the dirt. Also, this is a pre wash product, this is used prior to a touch wash, so that you aren't pushing dirt and grime around the paint work when touch washing.
I was wondering why he didn’t use a tip with a wider pattern when washing the soap off. Then I saw he had to blast large chunks of mud off the steps. Not bad, but still needs a contact wash.
Coming from a detailer, you could’ve gotten the same result by pressure washing and not wasting product. Showing wet paint for an after doesn’t show anything. Can guarantee the truck had contamination and brown spots everywhere
Right the way he rinsed the car down made me cringe he could have washed it faster with top to bottom he has to go back to spots he already rinsed just wasting water at this point
@@ITz_RUINED you have to wash bottom to top with this, it uses the product on the up stroke. Downwards will just rinse it off without it doing any work
@@jesselent7894 th-cam.com/video/mktKTCtYblY/w-d-xo.html This is how it's done, you work from bottom to top that uses the cleaning of the product THEN rinse from the top to bottom. Read the Comments it explains more.
we have been able to import them for many years. its just no one buys them, cause they're overpriced. especially once you factory in importing, conversion, and luxury car tax.
When washing a vehicle using conventional methods you firstly apply soap, wash using a sponge or a broom and then rinse off with water from the top to the bottom. Touchless washing is a bit different. Soap is applied through a high pressure foamer and then high pressure water is used as a “sponge or a broom”. The water is worked back into fresh soap, either from the bottom to the top or backwards in the case of trucks and trailers etc. In this way, the soap is used more efficiently. (If you wash from the top down, you would simply wash the soap off the vehicle which defeats the purpose). Then rinse from the top down to finish the cleaning process.
Love the comments on this video 😂 but after all is said and done what is the exact chemical that you guys used for this? Was it the Platinum wash, Active Diamond or the Carnet Jumbo??
When washing a vehicle using conventional methods you firstly apply soap, wash using a sponge or a broom and then rinse off with water from the top to the bottom. Touchless washing is a bit different. Soap is applied through a high pressure foamer and then high pressure water is used as a “sponge or a broom”. The water is worked back into fresh soap, either from the bottom to the top or backwards in the case of trucks and trailers etc. In this way, the soap is used more efficiently. (If you wash from the top down, you would simply wash the soap off the vehicle which defeats the purpose). Then rinse from the top down to finish the cleaning process.
Love it when you guys post, the comments are awesome. You guys convinced me to go NERTA about 4 years ago and so glad I did, Pre wash......hahahahahahahaha.
@@chiefsaustralia9012 not saying it’s related to the washing. I’m talking about what it goes through everyday to look like that. That stuff takes a toll on paint.
@@MintMonte87ACSS312 When washing a vehicle using conventional methods you firstly apply soap, wash using a sponge or a broom and then rinse off with water from the top to the bottom. Touchless washing is a bit different. Soap is applied through a high pressure foamer and then high pressure water is used as a “sponge or a broom”. The water is worked back into fresh soap, either from the bottom to the top or backwards in the case of trucks and trailers etc. In this way, the soap is used more efficiently. (If you wash from the top down, you would simply wash the soap off the vehicle which defeats the purpose). Then rinse from the top down to finish the cleaning process.
Not going to argue with the touchless bottom to top method but christ you coulda used the pressure washer first then apply the foam. The rinse down was the worst part for me, so bad
White paint will lie to you. Especially on video. Water would have given you just about the same results. I don’t believe that truck was as clean as hand washing.
God I love all the supposed your doing it all wrong comments, you all really do not know the environment this and all these vehicles work In. Minesites yes Western Australuan minesites all the haul roads are dust suppressed with salt water this vehicle will no doubt go back out and be just as dirty that afternoon get over it it is no show car clean or polish these operate in very hot conditions I know as I work up there our vehicles take an absolute beating so think about what they are doing before making stupid comments..
Rule #1 prewash rinse Rule #2 foam canon vehicle in thick foam Rule #3 use wash MIT and scrub vehicle with the MIT all the way around using the 2 bucket method #3 shammy it off #4 then make a video of the exterior and I bet it would look brand new and less cringy lol
That's the thing... No need to use 2 buckets or scrub. Just Spray it with this 'Acid foam' and use the highpressure water as the scrub and rinse it off. I do the same with my Toyota using Pronano Plus and Pronano Diamond Wax. Takes me an hour instead of an afternoon.
Mate, it really is a assed backwards pressure washing job, so, when washing a vehicle using conventional methods you firstly apply soap, wash using a sponge or a broom and then rinse off with water from the top to the bottom. Touchless washing is a bit different. Soap is applied through a high pressure foamer and then high pressure water is used as a “sponge or a broom”. The water is worked back into fresh soap, either from the bottom to the top or backwards in the case of trucks and trailers etc. In this way, the soap is used more efficiently. (If you wash from the top down, you would simply wash the soap off the vehicle which defeats the purpose). Then rinse from the top down to finish the cleaning process.
There's a very good reason why touchless cleaning uses this technique. If you're interested, we've made a video that explains it: th-cam.com/video/-_jpvcDU8Ek/w-d-xo.html
When washing a vehicle using conventional methods you firstly apply soap, wash using a sponge or a broom and then rinse off with water from the top to the bottom. Touchless washing is a bit different. Soap is applied through a high pressure foamer and then high pressure water is used as a “sponge or a broom”. The water is worked back into fresh soap, either from the bottom to the top or backwards in the case of trucks and trailers etc. In this way, the soap is used more efficiently. (If you wash from the top down, you would simply wash the soap off the vehicle which defeats the purpose). Then rinse from the top down to finish the cleaning process.
When washing a vehicle using conventional methods you firstly apply soap, wash using a sponge or a broom and then rinse off with water from the top to the bottom. Touchless washing is a bit different. Soap is applied through a high pressure foamer and then high pressure water is used as a “sponge or a broom”. The water is worked back into fresh soap, either from the bottom to the top or backwards in the case of trucks and trailers etc. In this way, the soap is used more efficiently. (If you wash from the top down, you would simply wash the soap off the vehicle which defeats the purpose). Then rinse from the top down to finish the cleaning process.
Mate! start at the top and work your way down! Slowly, not in a straight line and not so fast. Not gunna lie, looks very amateur work. Just take a couple of mins to watch a couple TH-cam videos for some tips... From yours truly a professional detailer.
When washing a vehicle using conventional methods you firstly apply soap, wash using a sponge or a broom and then rinse off with water from the top to the bottom. Touchless washing is a bit different. Soap is applied through a high pressure foamer and then high pressure water is used as a “sponge or a broom”. The water is worked back into fresh soap, either from the bottom to the top or backwards in the case of trucks and trailers etc. In this way, the soap is used more efficiently. (If you wash from the top down, you would simply wash the soap off the vehicle which defeats the purpose). Then rinse from the top down to finish the cleaning process.
It's not ideal. Our videos are actually demonstrations -- we're showing customers how our products work and how to use them (usually filmed by the customer). We wash what we're given, wherever the customer is.
Cuando se lava un vehículo con métodos convencionales, primero se aplica jabón, se lava con una esponja o una escoba y luego se enjuaga con agua de arriba hacia abajo. El lavado sin contacto es un poco diferente. El jabón se aplica a través de un espumador de alta presión y luego se usa agua a alta presión como una "esponja o una escoba". El agua se convierte nuevamente en jabón fresco, ya sea de abajo hacia arriba o hacia atrás en el caso de camiones y remolques, etc. De esta manera, el jabón se usa de manera más eficiente. (Si lava de arriba hacia abajo, simplemente lavaría el jabón del vehículo, lo que anula el propósito). Luego enjuague de arriba hacia abajo para terminar el proceso de limpieza.
I’ve never seen someone spray a vehicle so chaotic
If it’s so easy take your time and actually get the dirt off everything
Thank you! It’s driving me nuts watching this guy spray the car off!
Thats because you have never used a big machine like he is. When mud and dirt are that heavy and you have that much volume you have to spray an area then allow the water to work and run then come back. People who do this all day just naturally wash like he is because its faster and you actually get the surface properly rinsed. The top down slow one pass doesn’t rinse it and you learn that quick when your the one on the gun.
I am agree not very nice to see how he wash the car esspecially with the clear water it is not nice, not perfect, the car still dirty.
This is the first full sized truck ive seen , in the land down under . Its awesome, looking truck .
I can only imagine what that paint really looks like up close
Looks great it does
Scratching the hell out of it without it pre washing it, smh about as bad as taking in though a spinning death tunnel.
@@strosdetailingchannel he did pre wash it, that’s why he snow foamed it, how else are you meant to get the dirt off. He’s just done a contactless wash and you say he’s wrong? 😂😂
jk
When we watch your videos, we want to see the tiny dirt get removed... that what we watch for.
Will you do that for us please???
Great job
We can do both tiny dirt and big dirt?
Can someone please show this man how to use a pressure washer and clean a car/truck 🙏
Watching this makes me feel so good, can't explain why 😮
Why are you washing dirty water over the area that has been wash sprayed down already? Top to bottom would be more efficient. Washing it down with plain water first would have taken most of that crap off with no soap
When washing a vehicle using conventional methods you firstly apply soap, wash using a sponge or a broom and then rinse off with water from the top to the bottom.
Touchless washing is a bit different.
Soap is applied through a high pressure foamer and then high pressure water is used as a “sponge or a broom”. The water is worked back into fresh soap, either from the bottom to the top or backwards in the case of trucks and trailers etc. In this way, the soap is used more efficiently. (If you wash from the top down, you would simply wash the soap off the vehicle which defeats the purpose).
Then rinse from the top down to finish the cleaning process.
Buddy u should have sprayed it down first and got alot of the mud off
Indeed… very painful to watch..
So spread the dirt around the paint, yeah sure I'll do that immediately 😉
The detailer is right, bottoms to top method is the best.
For anyone ranting and raving, that he should be rinsing top to bottom. In this case, you are wrong.
You rinse bottom to top with these types of products to get the full cleaning power, you are activating the chemical reaction which is what removes most of the dirt.
Also, this is a pre wash product, this is used prior to a touch wash, so that you aren't pushing dirt and grime around the paint work when touch washing.
I was wondering why he didn’t use a tip with a wider pattern when washing the soap off. Then I saw he had to blast large chunks of mud off the steps. Not bad, but still needs a contact wash.
Coming from a detailer, you could’ve gotten the same result by pressure washing and not wasting product. Showing wet paint for an after doesn’t show anything. Can guarantee the truck had contamination and brown spots everywhere
Right the way he rinsed the car down made me cringe he could have washed it faster with top to bottom he has to go back to spots he already rinsed just wasting water at this point
@@ITz_RUINED you have to wash bottom to top with this, it uses the product on the up stroke. Downwards will just rinse it off without it doing any work
@@bonkeydollocks1879 this is not true. Idc what Wash you’re doing. You wash top-down
@@jesselent7894 I'm sorry but you're wrong and I'm not having a long drawn out debate about it.
@@jesselent7894 th-cam.com/video/mktKTCtYblY/w-d-xo.html
This is how it's done, you work from bottom to top that uses the cleaning of the product THEN rinse from the top to bottom. Read the Comments it explains more.
I’d rake the 5 extra minutes and do a pre wash to get a much better results
Its just a product demo
I did not know Australia has full size pickups, especially RAM heavy duty trucks. Otherwise that was a great wash process.
we have been able to import them for many years. its just no one buys them, cause they're overpriced. especially once you factory in importing, conversion, and luxury car tax.
So it was all white paint on it 🧐😲 . Very nice job you guys 👍
Thanks mate
Amazing wash Sir, which pressure washer do you use Sir? And at what bar pressure do you use your pressure washer?
The chaotic IDGAF pressure washing was hard to watch...
Why do they always go from the bottom to the top??
Coz they dumb
When washing a vehicle using conventional methods you firstly apply soap, wash using a sponge or a broom and then rinse off with water from the top to the bottom.
Touchless washing is a bit different.
Soap is applied through a high pressure foamer and then high pressure water is used as a “sponge or a broom”. The water is worked back into fresh soap, either from the bottom to the top or backwards in the case of trucks and trailers etc. In this way, the soap is used more efficiently. (If you wash from the top down, you would simply wash the soap off the vehicle which defeats the purpose).
Then rinse from the top down to finish the cleaning process.
Love the comments on this video 😂 but after all is said and done what is the exact chemical that you guys used for this? Was it the Platinum wash, Active Diamond or the Carnet Jumbo??
It was actually Kenotek Cargo 4100
@@chiefsaustralia9012 Cheers!
Can you make a video of your pressure washer setup and how you spray foam on the vehicles without a foam cannon on the lance
It should have probably been rinsed off first going side to side is how you use a pressure washer also not up and down
When washing a vehicle using conventional methods you firstly apply soap, wash using a sponge or a broom and then rinse off with water from the top to the bottom.
Touchless washing is a bit different.
Soap is applied through a high pressure foamer and then high pressure water is used as a “sponge or a broom”. The water is worked back into fresh soap, either from the bottom to the top or backwards in the case of trucks and trailers etc. In this way, the soap is used more efficiently. (If you wash from the top down, you would simply wash the soap off the vehicle which defeats the purpose).
Then rinse from the top down to finish the cleaning process.
Just sit back and admire the fact this truck has a stock suspension with a snorkel. Basically, this tells me the interior is probably fugged
It's going to get dirty again in that kind of road but, the wash could also have been better.
It is going to get dirty again
Show de bola meu amigo...Parabéns!!!
How the foam pressure become smooth like that ?!
Sand blaster?
Dude!!!! Rinse from top to bottom man! Jeeeez
We're washing, not rinsing. th-cam.com/video/-_jpvcDU8Ek/w-d-xo.html
What gun tip did you use to make the foam? Seems like it worked well and would like to have one.
Ppo
What is the pressure washer setup used in this video?
This is a 3000psi @21LPM machine
You should always start from the top and work your way down. No exceptions1
Spray from the top to the bottom. Ijs
Why?
@@chiefsaustralia9012 the way you guys were rinsing was just making more work for yourself.
now can we see it when it has dryed please get a white rag wipe it and if it has worked there should be on red dirt on the rag thanks
First you have to use the pressure washer go get the dirt out, and only after that, you can use the foamy sprayer!!
This dude really doesn’t know how to clean a vehicle, as far as spraying it down and getting in cracks 🤦🏽♂️ definitely wasn’t satisfying
OMG 😲, getting it into cracks 🤣🤣🤣🤣🤣😂😂🤣🤣
Di mana ada di jual sampo mobil nya cara pesan nya gimana
what is product name
Nerta Active Diamond
did this guy really just put soap on top of dirt without washing the dirt off first...
He did and the ute was clean
Can this product be bought in the UNITED STATES?
Might already be there, please contact www.kenotek.eu for your nearest dealer
Love it when you guys post, the comments are awesome. You guys convinced me to go NERTA about 4 years ago and so glad I did, Pre wash......hahahahahahahaha.
Amazing touchless foam
Thanks mate
Top to bottom would be the way.
God job!!! Congratulations!!!
Wow so great washing
Has Kenyan plate numbers
- Å fan! 👍
When the truck drive off it will get dirty again... Nice truck!
You can tell you're the type of guy that takes a shower and washes his feet first and his head last. 🤪😪😂👀
What soap is that
Kenotek Cargo 4100
It's safe for my 2015 black tuxedo paint an won't stain it like I was reading about it how it can stain paint
Boy I bet that pant is astronomically more thin than it’s supposed to be by now
I bet its not
@@chiefsaustralia9012 not saying it’s related to the washing. I’m talking about what it goes through everyday to look like that. That stuff takes a toll on paint.
not at all as the product is used a 1 % chemical and 99% water
@@chiefsaustralia9012 I believe you. Again I’m not talking about the wash job. Just the dirt getting plastered against it in the first place
@@MintMonte87ACSS312 When washing a vehicle using conventional methods you firstly apply soap, wash using a sponge or a broom and then rinse off with water from the top to the bottom.
Touchless washing is a bit different.
Soap is applied through a high pressure foamer and then high pressure water is used as a “sponge or a broom”. The water is worked back into fresh soap, either from the bottom to the top or backwards in the case of trucks and trailers etc. In this way, the soap is used more efficiently. (If you wash from the top down, you would simply wash the soap off the vehicle which defeats the purpose).
Then rinse from the top down to finish the cleaning process.
Not going to argue with the touchless bottom to top method but christ you coulda used the pressure washer first then apply the foam. The rinse down was the worst part for me, so bad
nice video. keep up the good work
Thank you
This video funny as hell
Would've got the same results with just water.
You must have special water where you live?
@@chiefsaustralia9012 ya its called a pressure washer
@@clarenceburkett3686 yeah mate we do
Exactly
@@clarenceburkett3686 that’s the most badass reply I’ve seen lmaoooo🤣😂
Este sabe lava carro 😂😂😂 num lava nem uma parte nem outro
Donde aprendió a lavar
Por qué
White paint will lie to you. Especially on video. Water would have given you just about the same results. I don’t believe that truck was as clean as hand washing.
Bạn làm rất tốt. Rửa nhanh rất sạch
Personally I would have rinsed the mud off first, then go for the soapy product then rinse.
Yes, but it's unnecessary with a touchless soap. No need to get rid of the dirt first since it won't cause scratches or swirls.
Where's Chris Fix when you need him
God I love all the supposed your doing it all wrong comments, you all really do not know the environment this and all these vehicles work In.
Minesites yes Western Australuan minesites all the haul roads are dust suppressed with salt water this vehicle will no doubt go back out and be just as dirty that afternoon get over it it is no show car clean or polish these operate in very hot conditions I know as I work up there our vehicles take an absolute beating so think about what they are doing before making stupid comments..
Thanks mate, it's really refreshing getting a sensible comment, much appreciated
Why tho,look at the site??? It makes no sense
Rule #1 prewash rinse
Rule #2 foam canon vehicle in thick foam
Rule #3 use wash MIT and scrub vehicle with the MIT all the way around using the 2 bucket method
#3 shammy it off
#4 then make a video of the exterior and I bet it would look brand new and less cringy lol
its a touchless wash it took him 10 minutes to do not a full proper hand wash
That's the thing... No need to use 2 buckets or scrub.
Just Spray it with this 'Acid foam' and use the highpressure water as the scrub and rinse it off.
I do the same with my Toyota using Pronano Plus and Pronano Diamond Wax.
Takes me an hour instead of an afternoon.
If this ain’t the most assed backwards pressure washing job then I don’t know what is
Mate, it really is a assed backwards pressure washing job, so, when washing a vehicle using conventional methods you firstly apply soap, wash using a sponge or a broom and then rinse off with water from the top to the bottom.
Touchless washing is a bit different.
Soap is applied through a high pressure foamer and then high pressure water is used as a “sponge or a broom”. The water is worked back into fresh soap, either from the bottom to the top or backwards in the case of trucks and trailers etc. In this way, the soap is used more efficiently. (If you wash from the top down, you would simply wash the soap off the vehicle which defeats the purpose).
Then rinse from the top down to finish the cleaning process.
There's a very good reason why touchless cleaning uses this technique. If you're interested, we've made a video that explains it: th-cam.com/video/-_jpvcDU8Ek/w-d-xo.html
Boa tarde que produto é esse
No undercarriage wash down? Dang
its just a product demo, Dang
@@chiefsaustralia9012 do you sell pressure washers? Cause that’s what did all the work
@type-dRew no we don't and no it didn't
Iam happy to see car wash
Nice job 👌👍👍
i know its a work truck but good god who rinses shit off like that
We do actually
@@chiefsaustralia9012 well y’all suck at cleaning 🤣🤣
@@mbkmillzdrilly1090 😂😂🤪
Don’t hire these guys - what a mess.
Top to bottom man
When washing a vehicle using conventional methods you firstly apply soap, wash using a sponge or a broom and then rinse off with water from the top to the bottom.
Touchless washing is a bit different.
Soap is applied through a high pressure foamer and then high pressure water is used as a “sponge or a broom”. The water is worked back into fresh soap, either from the bottom to the top or backwards in the case of trucks and trailers etc. In this way, the soap is used more efficiently. (If you wash from the top down, you would simply wash the soap off the vehicle which defeats the purpose).
Then rinse from the top down to finish the cleaning process.
He should start washing from up to down
Amazing
I personally find it odd to spray the car in horizontal motion...😏😏😏
The mudd still soft and wet let it dry and then try it again
When washing a vehicle using conventional methods you firstly apply soap, wash using a sponge or a broom and then rinse off with water from the top to the bottom.
Touchless washing is a bit different.
Soap is applied through a high pressure foamer and then high pressure water is used as a “sponge or a broom”. The water is worked back into fresh soap, either from the bottom to the top or backwards in the case of trucks and trailers etc. In this way, the soap is used more efficiently. (If you wash from the top down, you would simply wash the soap off the vehicle which defeats the purpose).
Then rinse from the top down to finish the cleaning process.
He prolly just removed the clear coat with that pressure 😂 but nah you got to mitt wash to get a solid shine 😂 but yet again they not a detailer
Great work sir❤️❤️❤️
Mate! start at the top and work your way down! Slowly, not in a straight line and not so fast. Not gunna lie, looks very amateur work. Just take a couple of mins to watch a couple TH-cam videos for some tips... From yours truly a professional detailer.
When washing a vehicle using conventional methods you firstly apply soap, wash using a sponge or a broom and then rinse off with water from the top to the bottom.
Touchless washing is a bit different.
Soap is applied through a high pressure foamer and then high pressure water is used as a “sponge or a broom”. The water is worked back into fresh soap, either from the bottom to the top or backwards in the case of trucks and trailers etc. In this way, the soap is used more efficiently. (If you wash from the top down, you would simply wash the soap off the vehicle which defeats the purpose).
Then rinse from the top down to finish the cleaning process.
Mantap 👍👍👍🇮🇩🇮🇩🇮🇩🇮🇩
No tiene ni idea como se lava una chata 😎🇦🇷🇦🇷🇦🇷
He's all over the place not taking his time
Washing a car under brightly sunshine? Damn
Sometimes the is no choice but brightly sunshine
R.I.P to the paint
Paints fine as it's only 1% product and 99% water
First soak the dry areas for a better release later. Then apply product if required. I belive you wasted product and water evenly.
I think that jetcleaner can clean our sin
I will never have this guy wash my car ….
And he will never wash your car
License plate number resemble that of 🇰🇪
pressure washing bottom to top made me sick
Im guessing its his first time washing lmao
keep guessing
100/1
100/200
Just dust not mud
I remember the first time I washed a car 😂 I was 6 not 40
NOT A BAD WAY OF SPRAY PAINTING YOUR TRUCK!!!!!!!!
Cant wash truck in dirty environment
It's not ideal. Our videos are actually demonstrations -- we're showing customers how our products work and how to use them (usually filmed by the customer). We wash what we're given, wherever the customer is.
Good
👍👍
its just a WASH not a DETAIL
Exactly
Нарушил все каноны мойки:на солнце,не смыв грязь,тем более песок,в одну фазу,не промыв зазоры.....руки бы оторвать
OLD VIDEO
Começam a lavar de baixo para cima!!! rsrsrsrsrrs
Cuando se lava un vehículo con métodos convencionales, primero se aplica jabón, se lava con una esponja o una escoba y luego se enjuaga con agua de arriba hacia abajo.
El lavado sin contacto es un poco diferente.
El jabón se aplica a través de un espumador de alta presión y luego se usa agua a alta presión como una "esponja o una escoba". El agua se convierte nuevamente en jabón fresco, ya sea de abajo hacia arriba o hacia atrás en el caso de camiones y remolques, etc. De esta manera, el jabón se usa de manera más eficiente. (Si lava de arriba hacia abajo, simplemente lavaría el jabón del vehículo, lo que anula el propósito).
Luego enjuague de arriba hacia abajo para terminar el proceso de limpieza.
Tô lavando um carro ou dando um banho no elefante
definitivamente dando un baño en un elefante
Razin Ninja 🇲🇾 🇦🇺
Lol that truck ain't gonna have the same paint tone. That's not how you start to wash a truck. Gonna be alot of paint scratching.
Cuci tanpa sentuh