For VoLTE Design & Optimization, check out the complete playlist below :) 🌐VoLTE Design & Optimization 💡th-cam.com/play/PL4OXTttOk9WiY6DKS3flR_NIYJf6NCLLJ.html
Awesome. Explained in a very good way. If Volte architecture, call setup and details of SIP are added to this series, it would be really beneficial. Anyways, full marks for th lectures.
If you want to understand about PDCCH and PDSCH, then I explained it in the 5G Frame Structure below. The objective of PDSCH and PDCCH is pretty similar in LTE and 5G. th-cam.com/video/nyzHkIpWFjE/w-d-xo.html
Thanks for the feedback. Do take a look at the other VoLTE videos in the playlist, there is a video that specifically discusses about PDCCH th-cam.com/play/PL4OXTttOk9WiY6DKS3flR_NIYJf6NCLLJ.html
The counters to get connected session time for VoLTE is the only appropriate way to estimate Erlangs. And by definition, it should be a realistic approach.
In short, it is very difficult to calculate exact values of data from given Erlangs but an approximation can be made based on above assumptions this is taken from your article on website so using session time gives you an approximate value but not true conversion
For VoLTE Design & Optimization, check out the complete playlist below :)
🌐VoLTE Design & Optimization
💡th-cam.com/play/PL4OXTttOk9WiY6DKS3flR_NIYJf6NCLLJ.html
Well presented ! we all are very grateful to get your lectures! please keep sharing more lectures
Thanks, great to hear such positive feedback :)
Very nice and well explained, please keep sharing more lectures on VoLTE topics.
Thanks Faisal. More lectures are planned so stay tuned :)
Hi, increasing the TTI to 40msec like Apple means that we will double the bitrate requirements to be 58kbps or half of the packet will be sent?
No, the bit rate per second remains same but the payload per TTI doubles.
Brother, whwere is 3GG specification and the table for TBS and the size of the packet supported?????
Could you please help with this
TBS details are in 3GPP 36.213
nicely explained.
Please check if you can make tti bundling video in detail
Sure, Thanks. Will work on it!
Very well presented, loved the music.
Very well articulated 👍
Thanks Katyal!
Can you please suggest any authenticate centers for protocol testing courses?
Let me check around as I have not taken any myself.
@@OurTechPlanet please .. thanku you 🙏🙏🙏🎉
Awesome. Explained in a very good way. If Volte architecture, call setup and details of SIP are added to this series, it would be really beneficial. Anyways, full marks for th lectures.
Noted
Thanks,
is there a difference between the number of LTE PRBs and the number of VoLTE PRBs?
No, they are effectively same.
@@OurTechPlanet I thought there was a percentage of PRB VoLTE in that of the overall LTE
Can you please clear explanation of PDCCH and PDSCH?
If you want to understand about PDCCH and PDSCH, then I explained it in the 5G Frame Structure below. The objective of PDSCH and PDCCH is pretty similar in LTE and 5G.
th-cam.com/video/nyzHkIpWFjE/w-d-xo.html
excellent presentation.
Thanks :)
Thanks, very useful
You are welcome!
the PDSCH and PDCCH part was not properly elaborated
Thanks for the feedback. Do take a look at the other VoLTE videos in the playlist, there is a video that specifically discusses about PDCCH
th-cam.com/play/PL4OXTttOk9WiY6DKS3flR_NIYJf6NCLLJ.html
how much realistic is using qci 1 erab session time to get volte traffic in Erlang
The counters to get connected session time for VoLTE is the only appropriate way to estimate Erlangs. And by definition, it should be a realistic approach.
@@OurTechPlanet i meant that is it true conversion or estimated value
In short, it is very difficult to calculate exact values of data from given Erlangs but an approximation can be made based on above assumptions
this is taken from your article on website so using session time gives you an approximate value but not true conversion
awaiting your kind response
@@munzirkhalil4213 No, it is a correct value for the Erlangs. So, you can use those counters to get the Erlangs.
Thank You.
Thanks, Zubaer.