Oh no! To prevent the bubble from popping there are a couple things we can trouble shoot. 1. Don't try and pop it immediately after inflating. Wait at least 30 minutes so the balloons have a chance to relax. 2. Under inflate the bubble a little bit so it isn't under as much tension as the latex balloon. The latex balloon should be near its full size so it does pop. 3. Place the tape a few inches from the bubble's seam and not right on it, as that is the weak point of the bubble. 4. Rub the tape so it is adhered to the bubble really well. If in double you can use a second piece of tape on top of the first. 5. Use a small pin to pop the bubble.
Oh God! I made this and the reveal is today. 😳 I pray all goes well. If not we will still see what it is. I did everything but it may be over inflated. 1 out of five ain’t bad. 🤞🏽
I did this for my best friend’s gender reveal and it was a success!! Of course I did a practice one a week before just in cause I ran into any hiccups for the real one. Everyone loved the idea! Mess free and easy to dispose. Thank you for this! Beautiful memories were created 💙
@@azrakurtovic800 I used a 20 inch size Bobo balloon and I use an 18 inch size black balloon and I made sure that I filled the black balloon it’s full 18 inch size. With those sizes the Bobo balloon will still be at its max
Thank you so much for this tutorial. I had 3 prior failed attempts; both balloons popped. But after finding your tutorial it was a success!!! I’m so happy bc the gender reveal is tomorrow 😊
Hi Andrea, I'm glad the video was helpful! Yes the bubble balloon will slowly continue to deflate if the pin hole isn't taped over. I taped the hole of the balloon I used in the video, and it is still inflated over a week later.
This is awesome. I’ve just gotten into balloons. I recently made a huge balloon garland for my oldest brother’s retirement party. I just HAVE to try this. New subbie here. Tfs and have a great day.🤗🎈
I am making one of these for a friend's reveal at the end of the month. I have done a tester, and it worked perfectly only issue I have is I can see the 260 I used to tie the big balloon to the base any suggestions?
or what about a strong laserpointer to pop it? Once I saw a sience-docomentation of lasers and there was a guy, who popped a black balloon, that was inside a clear one without popping the clear one by using a strong laserpointer.
I'm really struggling to find black gender balloons here in the UK to fit a 24 inch bobo balloon. I personally feel the 36 inch gender reveal balloons are too big but could you still use these or would they not inflate enough inside a 24 inch bobo? TIA
Hi great question. I wouldn't use a black 36" inside the 24" bobo. We want the black balloon to be inflated close to it's full size so it pops easily. I would look for a 18-24" black balloon and then under inflate the bubble to match the max size of the black balloon. Tuftex and Betallic make both 18" and 24" balloons. I'm not sure what is available in the UK, but I hope this helps. Good luck!
Hi~ I’ve tried it 6 times but all failed 😢 I’m pretty exhausted now… I really don’t know where went wrong…. 3 of the time the inside ballon didn’t pop after I poked…… and the rest are both ballons ( the inside and outside one) popped at the same time… what possibility would caused my failure? Please help… my friend’s baby gender reveal party is next week… thank you
Hello, will this work with helium? . So im doing a gender reveal party for my sister and i wanted to do the no mess reveal. I wanted to know is this doable with helium? So once the inside balloon is popped, will the bubble balloon still float? I feel it should work, but haven’t tried it yet so I thought i would ask an expert first lol ❤️
It is typically called a bubble balloon. There are a couple different brands and they call them all different things. The ones I used are Bobo balloons and there is an Amazon link in the description to the one I purchased.
Hola buenos dias Muy lindo , Pero tengo una pregunta . Cómo se llaman los papelitos color verde q le introdujo al globo y el líquido .aquí en Colombia no sé con qué nombre se conseguirán
I used an 18" black balloon and a 24" Bobo bubble balloon. Everything I used is listed in the description box with links to the same products. 😊 Happy making!
The bobo balloons looks great for a long time. You could easily make this 2-3 days ahead of time. After popping the black balloon I still have the bobo balloon weeks later and it still looks great!
I love this video! Thank you. I've tested it out and after a few duds (poor quality balloons) I've finally got it working. Do you know if it needs to be sello tape or have you tried stickers before?
Hi! Thank you so much for video! Can you please let me know what type of marker/pen you are using to write on the balloon? And what is the size of PVC and black balloon? I am trying to make one for my sister’s baby shower. Your answers will be highly appreciated.
Hi Tshering, I used a white POSCA paint pen on the balloon. Every item I used is listed in the description box with links to the exact product so you can replicate what I made. I hope you have a wonderful baby shower!
The same thing happened to me when my black balloon was too under inflated. It is a balance of balloon sizes. The black balloon needs to be inflated to it's full size so it pops easily.
You can use different sizes of balloons. The important thing is the latex balloon should always be the smaller balloon, so it is stretched tight and will easily pop while the bubble isn't quite as tight and less likely to pop.
Thank you so much for responding to my question. I don't have an impulse heat sealer, can i either use the portable sealer- mostly the ones you use for chips or can i use a flat iron straightener for hair?
We have done several ‘test’ balloons using all the suggestions in the video and comments to prevent popping of the Bobo balloon and they have all popped. 😔
I tried it and both balloons popped.. any idea on why this might have happened??
Oh no! To prevent the bubble from popping there are a couple things we can trouble shoot.
1. Don't try and pop it immediately after inflating. Wait at least 30 minutes so the balloons have a chance to relax.
2. Under inflate the bubble a little bit so it isn't under as much tension as the latex balloon. The latex balloon should be near its full size so it does pop.
3. Place the tape a few inches from the bubble's seam and not right on it, as that is the weak point of the bubble.
4. Rub the tape so it is adhered to the bubble really well. If in double you can use a second piece of tape on top of the first.
5. Use a small pin to pop the bubble.
Oh God! I made this and the reveal is today. 😳 I pray all goes well. If not we will still see what it is. I did everything but it may be over inflated. 1 out of five ain’t bad. 🤞🏽
@@stasiwilliams how did it go??
@@nataliesantos4421 Both balloons popped. I wanted it to be big. 🤦🏽♀️ But it was ooooh so fun. It’s a boy. 💙
Hi guys you can also try stretching the balloons out before hand make sure its nice and flexible
I did this for my best friend’s gender reveal and it was a success!! Of course I did a practice one a week before just in cause I ran into any hiccups for the real one. Everyone loved the idea! Mess free and easy to dispose. Thank you for this! Beautiful memories were created 💙
How did you manage to not pop the bubble balloon?
@@azrakurtovic800 I used a 20 inch size Bobo balloon and I use an 18 inch size black balloon and I made sure that I filled the black balloon it’s full 18 inch size. With those sizes the Bobo balloon will still be at its max
Did you let it sit any amount of time before popping it?
Thank you so much for this tutorial. I had 3 prior failed attempts; both balloons popped. But after finding your tutorial it was a success!!! I’m so happy bc the gender reveal is tomorrow 😊
I followed this tutorial and the balloon pop came out perfectly !
Incredible well explain, you're a PRO, thank you for sharing!!
May I ask what may be the reason why the inside balloon doesn’t pop with a pin instead it just slowly lose its air?
Can I only use tissue paper confetti
So cool. I thank you for explaining this technique in detail. Does the bobo balloon deflate if you don't add additional tape after the pin goes in?
Hi Andrea, I'm glad the video was helpful! Yes the bubble balloon will slowly continue to deflate if the pin hole isn't taped over. I taped the hole of the balloon I used in the video, and it is still inflated over a week later.
This is awesome. I’ve just gotten into balloons. I recently made a huge balloon garland for my oldest brother’s retirement party. I just HAVE to try this. New subbie here. Tfs and have a great day.🤗🎈
Thank you so much for this tutorial. Will try it and hope it comes out well.
Thank you
Hey, can i use an 20inch clear boho and an 18inch black?
Looks awesome ♥️
Thank you soo much this video helps me with easy details
Love it❤🎉
Wow!!!!! Thank you!!I'm so trying this 🎈🎈
Have fun!
Awesome. 😊 Thanks for sharing. 😊
Genius! Thank you!❤️
Hi have you used 1” scotch tape i tried it with no success probably a thicker one would help?
hello, whats the size of the black balloon?
How long in advance can you make it?
Happy New year. I love this idea, thank you for sharing your designs and making them so easy to follow 😍🤩
Where did you get the bobo balloon and black balloon from
Where’d you get the clear balloon
This is so awesome, what would someone charge for one of these?!
Can i do it if both black and clear balloons have the same size?
I am having a gender reveal this weekend, definitely going to do this because my budget is tight and I mean very tight...will post a picture here
So I’m having trouble every time I pop it the boho balloon pops right along with the inner balloon how do I fix this
Thank you!
I’m a beginner n balloons. Where can I find that powder?
Is there a way to pop the bubble balloon when I fill it with 5-inch balloons? I want to pop the outside balloon..
Bravo !
Loved thanks for share 🤩
I am making one of these for a friend's reveal at the end of the month. I have done a tester, and it worked perfectly only issue I have is I can see the 260 I used to tie the big balloon to the base any suggestions?
or what about a strong laserpointer to pop it?
Once I saw a sience-docomentation of lasers and there was a guy, who popped a black balloon, that was inside a clear one without popping the clear one by using a strong laserpointer.
Any idea why when I pop the balloon the blue powder does not blow all over the bobo and just stays at the bottom of the balloon?
Amazing video!! I am think you do this.. in the uk I can only get hold of a 36” clear balloons and 18” black balloon will this work ?
Beautiful ❤ how much do you sell these for?
So my black balloon deflated a bit because it got a hole when I tied it. I'm afraid it won't pop now without enough tension. Is there any hope?
Thank you for this video! May I ask, what kind of marker was that?
What did you use to pop the balloon?
I used a sewing pin. You want something sharp and small.
Hi, will it still work if I use both 18in in boho and latex? Or do the latex need to be a bit smaller?
Hi tried this 3 times abs both the balloons popped each time I used my electric pump to inflate and tried with in minutes of making it
I'm sorry it isn't working out. Try waiting for an hour before popping it. I learned from another balloon artist the balloons need a chance to relax.
I'm really struggling to find black gender balloons here in the UK to fit a 24 inch bobo balloon.
I personally feel the 36 inch gender reveal balloons are too big but could you still use these or would they not inflate enough inside a 24 inch bobo? TIA
Hi great question. I wouldn't use a black 36" inside the 24" bobo. We want the black balloon to be inflated close to it's full size so it pops easily. I would look for a 18-24" black balloon and then under inflate the bubble to match the max size of the black balloon. Tuftex and Betallic make both 18" and 24" balloons. I'm not sure what is available in the UK, but I hope this helps. Good luck!
So cute! Thank you for this very detailed video.
Nice black one is also 24 inch
Hi~
I’ve tried it 6 times but all failed 😢 I’m pretty exhausted now… I really don’t know where went wrong…. 3 of the time the inside ballon didn’t pop after I poked…… and the rest are both ballons ( the inside and outside one) popped at the same time… what possibility would caused my failure? Please help… my friend’s baby gender reveal party is next week… thank you
Do you only inflate the black balloon? Not the bubble?
Yep! The bubble will inflate along with the black balloon.
The green grass is that a backdrop or artificial grass? Can you link where to get that please. Lovely tips thank you
Hi Dorothy, thanks for watching! That is a boxwood wall set the I got from efavormart. This is the one I bought bit.ly/3pyDUYh
I don't know what went wrong but both balloons popped for me?
Hello, will this work with helium? .
So im doing a gender reveal party for my sister and i wanted to do the no mess reveal. I wanted to know is this doable with helium? So once the inside balloon is popped, will the bubble balloon still float?
I feel it should work, but haven’t tried it yet so I thought i would ask an expert first lol ❤️
What do u call the clear balloon? And where to buy?
It is typically called a bubble balloon. There are a couple different brands and they call them all different things. The ones I used are Bobo balloons and there is an Amazon link in the description to the one I purchased.
Hola buenos dias
Muy lindo ,
Pero tengo una pregunta .
Cómo se llaman los papelitos color verde
q le introdujo al globo y el líquido .aquí en Colombia no sé con qué nombre se conseguirán
May I know the sizez of the black and transparent balloons? Thankyou
I used an 18" black balloon and a 24" Bobo bubble balloon. Everything I used is listed in the description box with links to the same products. 😊 Happy making!
@@EventAnswer Thankyouuuuu. I've read it from the description after I posted my comment though. 😅
Thanks for this! How long can these sit before popping? Could they be made a day or so ahead of time? 🙂
The bobo balloons looks great for a long time. You could easily make this 2-3 days ahead of time. After popping the black balloon I still have the bobo balloon weeks later and it still looks great!
@@EventAnswer Thank you!
the clear balloon i have popped from the other side can u helppp please
I love this video! Thank you. I've tested it out and after a few duds (poor quality balloons) I've finally got it working. Do you know if it needs to be sello tape or have you tried stickers before?
What did you make differently so both wont pop??
Hi! Thank you so much for video! Can you please let me know what type of marker/pen you are using to write on the balloon?
And what is the size of PVC and black balloon? I am trying to make one for my sister’s baby shower.
Your answers will be highly appreciated.
Hi Tshering, I used a white POSCA paint pen on the balloon. Every item I used is listed in the description box with links to the exact product so you can replicate what I made. I hope you have a wonderful baby shower!
Omg 3 attempts and both balloons keep popping😞. Not sure what am I doing wrong
I made one, popped it but the black balloon didn’t pop quickly. The needle just made holes in the black balloon 😩 what happened?
The same thing happened to me when my black balloon was too under inflated. It is a balance of balloon sizes. The black balloon needs to be inflated to it's full size so it pops easily.
@@EventAnswer oh darn, I think that’s what happened then :( the bobo was 20” and the black one was 24” 😫
this is great . . . thank you for sharing🎈 where to you get the powder?
Could I do this with helium??
Weather Gone Viral. The Black Gender Balloon went pop and revealed Blue for Boy. Popped with Heat.
Hi, can I use 20" or 24" bubble balloon (clear balloon) and latext balloon 18"? Will the inside balloon will only pop with those sizes?
You can use different sizes of balloons. The important thing is the latex balloon should always be the smaller balloon, so it is stretched tight and will easily pop while the bubble isn't quite as tight and less likely to pop.
Thank you so much for responding to my question. I don't have an impulse heat sealer, can i either use the portable sealer- mostly the ones you use for chips or can i use a flat iron straightener for hair?
We have done several ‘test’ balloons using all the suggestions in the video and comments to prevent popping of the Bobo balloon and they have all popped. 😔
I can't do it huhu. Both were popping
Same here 😅
Have you used two packing tape or just a small scotch tape?
😇😇
Now i understand why the bobo balloon didn't pop.
So when u inflated the black balloon after it had the powder ... U don't add air to the bobo balloon ?
Hi Amanda, That is correct. It is just like if you were double stuffing two latex balloons.