You probably dont care but if you're bored like me atm you can stream pretty much all the new movies on InstaFlixxer. Have been streaming with my gf these days =)
This car is beautiful, i have an sxt and when the time is right I'm looking to get me a shaker rt or scat dosent really matter to me, just the fact of having a shaker is amazing to me. That's why i have an sxt just to have a challenger at the end the car is still a beauty. Thanks for the video i love it I would wide body my sxt also. Lol. Keep the good content coming, very instructional.
Thank you for showing just the backs in this video, have been thinking of just doing the backs only on mine and this shows that look for me... still on the fence weather to do back only.. lol
hello I have a question do you think I have to cut away part of the wheel wale on the wide body install if the wheels I have are 20x11 in the rear and 20x9 in the front staggered with 2" spacers in the front?
It looks really nice! I currently have 20x9 wheels. I know I will need spacers, but will I need wider wheels too or is that strictly an aesthetic/performance choice?
Depends on your offset. You dont want spacers more than 50mm wide. My car is a narrow body challenger with 10.5 inch wheels. My wheel offset is 22mm. I will need 1.5 inch (38mm) spacers to make my 10.5 inch wheel flush with the widebody kit from Vicrez. 11 inch wide factory widebody wheels are offset to fit the fenders. You could technically put a 13-14 inch wheel back there with 355 tires if you got the offset correct. Its all about the offset. You may need a pretty fat spacer for 9 inch wheels... But I could be wrong.
@@Сергей-с7х2в I dont know if it works on scats without cutting. I noticed on some of the widebody kits I've seen, they're made specifically for hellcats, no cutting. Drive heights as someone else mentioned may be different for non-hellcat vehicles. But the rubbing tires shouldn't be a problem, as offset is what creates proper space from the wheel well, and forces them to stick out. If the wheels fit a scat pack wheel well there should be no rubbing as the factory widebody uses the same wheels when you order it, and they do not have to alter the vehicle.
Great Job! So informative. The Build looks amazing 🔥🔥 🔥
Thank you so much 🤗
Oof the lambo doors and underglow killed it for me.
I love the way you explain everything you did and why.
No spacers, brand new Voxx Widebody2 wheels with the correct offset -2.5
Awesome bro, I've been wanting to do this to my hellcat and wasn't sure about the vicrez kit or the voxx -2 offsets. Thanks so much.
Great video. Thanks for sharing. Your build is 🔥. Can I ask where you bought that MOPAR side stripe? Thanks!
Looking to do this kit on my v6 challenger
You probably dont care but if you're bored like me atm you can stream pretty much all the new movies on InstaFlixxer. Have been streaming with my gf these days =)
@Kobe Brayden Definitely, have been watching on instaflixxer for months myself =)
@Kobe Brayden Yea, I have been watching on InstaFlixxer for since december myself =)
This car is beautiful, i have an sxt and when the time is right I'm looking to get me a shaker rt or scat dosent really matter to me, just the fact of having a shaker is amazing to me. That's why i have an sxt just to have a challenger at the end the car is still a beauty. Thanks for the video i love it I would wide body my sxt also. Lol. Keep the good content coming, very instructional.
Thank you
Yo my guy a challey is a challey bro you in the gang mopar gang
I ordered mine 1 1/2 weeks ago! And it was delayed until the june 24th. Im soooooo excited
you will get it shortly :P
if i could use the giveaway card towards a shaker i would but i gotta keep my charger looking like a sleeper or looking updated
thank you for sharing! I hope to install this kit down the road while watching your videos.
Np, if you have any questions when you do it just hit me up on Instagram. @mango3ninety2
Looks good, what did you do so the tires can like up good ??🤔
305 35r20 Tires
Wheel: -2.5 Offset 20 X 11" all 4 corners.
@@mango3ninety2 you don’t get any rubbing in the front? I thought 275s were the widest you could go upfront.
Great video, can you link where you found those push pins for the fenders? thank you!
Mopar website
Do you need to cut the fenders for a scat
Thank you for showing just the backs in this video, have been thinking of just doing the backs only on mine and this shows that look for me... still on the fence weather to do back only.. lol
Thanks so much Bud just Bought my kit cant wait
Car is so sick
Thanks! More to see on Instagram:@mango3ninety2
instagram.com/mango3ninety2
Did you have to cut fender weld to keep the tires from rubbing, or do it rub, I thinking about getting kit for my hellcat.
Man looks great!. Good job
hello I have a question do you think I have to cut away part of the wheel wale on the wide body install if the wheels I have are 20x11 in the rear and 20x9 in the front staggered with 2" spacers in the front?
I would say most likely, especially if it's a hellcat or Scatpack. Bilstein suspension. Yellow shocks.
It looks really nice!
I currently have 20x9 wheels. I know I will need spacers, but will I need wider wheels too or is that strictly an aesthetic/performance choice?
Depends on your offset. You dont want spacers more than 50mm wide. My car is a narrow body challenger with 10.5 inch wheels. My wheel offset is 22mm. I will need 1.5 inch (38mm) spacers to make my 10.5 inch wheel flush with the widebody kit from Vicrez.
11 inch wide factory widebody wheels are offset to fit the fenders. You could technically put a 13-14 inch wheel back there with 355 tires if you got the offset correct. Its all about the offset. You may need a pretty fat spacer for 9 inch wheels... But I could be wrong.
@@Malseph thanks, for the info
What are the tire and rim size also awesome job!! 🔥🔥
Hey brother I have a 19 scat with 315/35/20s then 275/35/20s on the front would it already be good fitment wise
You are the man. Great video. Very informative. How much was the kit? On to part 2
Full widebody $1349 only flares $689
@@sleeperkat_srt full whitey body means fender flares and hell cat bumper?
@@Сергей-с7х2в Yeah
did you get the kit painted or wrapped
So with stock suspension you still have to cut ?
Yes, Scatpack and Hellcat you do. Bilstein suspension.
Nice video 👌👌
Thanks
Did you have to do alignment with the 20x11 wheels ?
No
how did it hold up?
Thanks man
🔥 🔥🔥 dope bro 🔥🔥🔥
Thanks
How is fender flares now? Still stay stuck tight?
Yessir! Still holding strong! 😏
Where did you get the kit painted? If I’m correct it comes unpainted
It was painted at a local paint shop.
Nice job!!! spacers are 1.5 inches?
Nope, new wheels, I have video about that too! 😏
Amazing
Thanks
I have a shaker and I was wondering what wheel spacers are needed?
I went with Widebody wheels form vicrez.com
Hi, what's the part numbers for the 3m tape? Thank you!
Did you had to cut your car fender? So the tire wont rub? People are saying because they have their car lowered?
If you are slammed or lowered you will need to cut :O
He used voxx replicas with basically factory negative offset thats used by mopar so wheel rub is impossible.
@@DarkHorseParatrooper If I got you right, putting an original hellcat widebody rims with -2.5 off set will avoid rubbing?
I did this on a Scatpack, Scatpack are factory lowered.
@@Сергей-с7х2в I dont know if it works on scats without cutting. I noticed on some of the widebody kits I've seen, they're made specifically for hellcats, no cutting. Drive heights as someone else mentioned may be different for non-hellcat vehicles. But the rubbing tires shouldn't be a problem, as offset is what creates proper space from the wheel well, and forces them to stick out. If the wheels fit a scat pack wheel well there should be no rubbing as the factory widebody uses the same wheels when you order it, and they do not have to alter the vehicle.
Part number for the wide 3m tape please
Does it come painted to your car color?
NO
Soooooo re-do this video with camera held in landscape so that we can see... lol
How long did the kit last anything come loose ?
Stilling going good!💯
Was it already painted?
No, paint shop did that
Did you have to screw into the car
Yes 3 spots.
@@mango3ninety2 so you have to screw in the wide body vicrez kit or can it be done without
Which screws did you use bro?
Que número son tus rims amigo
20x11 305 tires
Super poser thing to do. Its gonna look like crap and everyone will be able to tell.
Should I hit you up on here or fb?
Instagram