Nice channel! In my case the gearbox fillerplugvdidn’t came loose at all. We tried everything and ended with replacing the gearbox! I am glad for you is was going well. Nice vid man.
The R1150 gs is a great bike. Video is great. I used your guides on the abs etc many times. I have a 2010 R1200 gsa with a partially blocked fuel filter. It seams the only way to solve the problem is to reserve flush them. Do you have any ideas?
Son of a .....I've been working on cars for 25 years. Never knew the towel trick.
Top tip, pre charge your new oil filter before install
Good tip!
Didn't oil the rubber o-ring on the oil filter before install...
I wish I had taken video of before/after with engine sound for future reference when I did mine. It made such a difference!
Clear, concise, and easily understandable....... Best I've seen.... thankew2much
I don’t see the oil etc linked below, maybe I’m bad at computer
Bru… manu thanks this tutorial !
So clean!
Looking forward for the sequel!
Nice channel!
In my case the gearbox fillerplugvdidn’t came loose at all. We tried everything and ended with replacing the gearbox!
I am glad for you is was going well.
Nice vid man.
✌🏻👌🏻from Spain. Seville
Love this channel!!!
The R1150 gs is a great bike. Video is great. I used your guides on the abs etc many times. I have a 2010 R1200 gsa with a partially blocked fuel filter. It seams the only way to solve the problem is to reserve flush them. Do you have any ideas?
bmwpartsguy.com/products/fuel-filter-bmw-oilhead-hexhead-k-bike-scooter-ducati-triumph-16-14-2-325-859-enduralast-ff-859?_pos=13&_sid=97a461204&_ss=r
Where can I find the specific crush washers required? check the site and i dont require the bolts as well
The Clymer book says 230ml for the final drive 🤔
What oil do you use for rear transmission and gearbox?
I use 10w40 for mine R1150GS, what do u think?
20w50 is best for air/oil cooled models, the liquid cooled ones take 10w40
@@TheBMWGuy thanks a lot.