Hi, I assembled the Tucano for tomorrow's test. I use FullPower 6S 5200mha that weigh 725 gr. positioning them as far back as possible but when I check the C.G. at 80mm the model is very beaten. The nose is too low, heavy. Should I remove some foam and move the battery back further? Please give me a suggestion. Maurizio from Italy.
@@aloccimaurizio4191 I had a bad nose gear so mine has been out of commission for a while. New upgraded nose gear arrives tomorrow. Not all Tucano planes seem to have this problem. My nose gear collapsed on the 7th flight. I landed on the mains on the runway and when the nose came down it collapsed. Some had problem popping out of the connector inside the retract housing. I did not put in the suggested wedge under the retract housing. Now I will be adding that. Also I had to adjust the ESC. I was getting a screeching noise. Set ESC timing to mid with slow startup power. It's pain because you have to count the beeps.
![[LIVE] : ONE ลุมพินี 91 | คู่เอก "คมอาวุธ vs อเล็กเซย์"](http://i.ytimg.com/vi/V0RkEfYFsgM/mqdefault.jpg)
Hi, I assembled the Tucano for tomorrow's test. I use FullPower 6S 5200mha that weigh 725 gr. positioning them as far back as possible but when I check the C.G. at 80mm the model is very beaten. The nose is too low, heavy. Should I remove some foam and move the battery back further? Please give me a suggestion. Maurizio from Italy.
@@aloccimaurizio4191 I am using a Turnigy 5000 60c. 750g all the way back and she flew fine after I trimmed her. No need to remove foam.
@@aloccimaurizio4191 I had a bad nose gear so mine has been out of commission for a while. New upgraded nose gear arrives tomorrow. Not all Tucano planes seem to have this problem. My nose gear collapsed on the 7th flight. I landed on the mains on the runway and when the nose came down it collapsed. Some had problem popping out of the connector inside the retract housing. I did not put in the suggested wedge under the retract housing. Now I will be adding that. Also I had to adjust the ESC. I was getting a screeching noise.
Set ESC timing to mid with slow startup power.
It's pain because you have to count the beeps.
@LoveRC Thank you my friend.