SCX24 BUDGET BRUSHLESS CONVERSION * INJORA FAT VIPER*

แชร์
ฝัง
  • เผยแพร่เมื่อ 25 ธ.ค. 2024

ความคิดเห็น • 21

  • @RocksandChops
    @RocksandChops หลายเดือนก่อน +1

    Very Awesome, I think this is the best brushless motor set up for your money. It’s what I’m going with. The performance seems to be great.👍🏼

  • @24Krawlers
    @24Krawlers 2 หลายเดือนก่อน +5

    You should take your springs off or switch them to stock springs. Will lower the center of gravity so it ain’t so high unless you like it all high then whatever lol.

    • @hachiEightSix
      @hachiEightSix 2 หลายเดือนก่อน +1

      yeah that thing rides insanely high

    • @24Krawlers
      @24Krawlers หลายเดือนก่อน +1

      @@hachiEightSix right! Thats why I mentioned it. Hopefully he takes the advice but if he likes that way then.. yeaahhh good luck haha

  • @shawnrichardson118
    @shawnrichardson118 2 หลายเดือนก่อน

    I love this setup I have a very similar setup and it’s very capable great video

  • @ccgcon9574
    @ccgcon9574 หลายเดือนก่อน

    Sweet video man thanks. Try reprogramming the esc it will fix that slow speed choppyness you are getting. Cheers

  • @callsignmohas5190
    @callsignmohas5190 หลายเดือนก่อน +3

    You should put some longer shocks on it, and make it even taller

  • @rcmountaingoat
    @rcmountaingoat หลายเดือนก่อน +1

    I am struggling to program it. How did you do it or what happens after connecting the programmer with the pc ? In my case, nothing…

    • @rockyrc
      @rockyrc  หลายเดือนก่อน +1

      I didn’t program mine, I’ll have to try this too see if I have the same issue. Sounds like somethings wrong with yours though I’d contact Injora

    • @ccgcon9574
      @ccgcon9574 หลายเดือนก่อน +1

      I programmed mine yesterday. It was a big pain but I got it. You cave to go to injora website and go to the programming tutorial and download their program, then unzip it, and the rest is just follow injoras video instructions. If you get that far and you can't get the esc to connect to the computer, try a different usb cord. Took my hours but swapped the usb cord and it finally recognized it. Reprogramming will fix that choppy thing it does at very slow speeds. You can see it in this video when he's going slow

    • @rcmountaingoat
      @rcmountaingoat หลายเดือนก่อน

      @ is there not the program on the programming part. The one I have to connect with a usb c cable? I’ll try it again. And do you think it’s with doing it? What is the benefit? And thank you 🤓

  • @jd6041
    @jd6041 15 วันที่ผ่านมา

    Can I run this conversion kit with the stock transmitter and receiver?

  • @duck5904
    @duck5904 2 หลายเดือนก่อน

    Did you have to program the esc or were you able to plug in and go with it?

    • @rockyrc
      @rockyrc  2 หลายเดือนก่อน +2

      I didn’t have to program it.

    • @duck5904
      @duck5904 2 หลายเดือนก่อน

      @@rockyrc awesome thank you and it’s still running good?

    • @rockyrc
      @rockyrc  หลายเดือนก่อน

      Yup, no issues

    • @ccgcon9574
      @ccgcon9574 หลายเดือนก่อน +1

      If you get slow speed choppyness reprogramming it to injoras specs it'll take care of that. Cheers!

    • @duck5904
      @duck5904 หลายเดือนก่อน

      @@ccgcon9574 will keep that in mind thank you. Been running great tho

  • @maine_iacfpv3237
    @maine_iacfpv3237 หลายเดือนก่อน

    Can you run it as a rear facing motor?

    • @ccgcon9574
      @ccgcon9574 หลายเดือนก่อน

      I believe you can flip the skidplate and run in rear facing. I'm not 100% sure though

  • @Tipman2OOO
    @Tipman2OOO หลายเดือนก่อน

    "Just 60 dollars"... its $69.99... plus tax... plus possibly shipping 🤷‍♂️