my k630 just got dleivered today, after like 5 minutes of having it i came straight here and started modding, i did the tape and foam mods and its safe to say that it now, THOCCCCCCS
I like how you dive right into the video. No time wasting intros 👍🏼 Sponsorship segments and "subscribe" call-to-actions are best done in the middle or at the end of the video.
Absolute banger of a video man. I've been struggling to figure out which keyboard to buy for my birthday and I'm on a tight budget too, and after this video I'm pretty sure i will get this and add mods over the years. Really it sounds superb.
Thanks for the video. I just bought this practically new for 24 dollars +-, and I was wondering if I could make it sound better. Greetings from México!
So you basically didn't replace the switches, just a tweak here and there, and you're got a modded keyboard that sounds amazing. How much cost, would you say have gone to the modification process, if you don't mind me asking?
Hey, super video! I have a similar WK61 keyboard that I would like to mod the way you did. I'm having questions about the lube. Have you tested any other gels/greases besides silicon grease or did any comparison? Will the silicon grease fall off (like settle down at the bottom part of whatever it's applied to) in the long run?
I have problem with my k530 i modded it witn foam and tape and everything was good but when i put stabilizers and switches i have problem that stabilizers ale lower then switch and when i want to put spacebar, enter or backspace keycap its stuck BC stabilizers are lower
I mentioned in the video itself, got it from a friend named Sahil Todankar. And yes pretty much all kinds of key caps that have provisions for 60% layout will fit.
@@rohitagni Thanks for your reply. But a little confusion. But how will you choose, Are you going to use any random comment picker ? or through other method .
try gmk67 with akko jelly black and budget but good cherry profile keycaps. That will give you the best feel. I had gone through that journey you're going right now for last 3 years....That's why suggesting. And If possible...please let me know if there any low profile tactile keyboard available in India which will not cost a fortune.
Already used the EK68 from Epomaker (same as the GMK67), it's a good one agreed. As far as the low prof keyboards are concerned, I am aware of only one (K621 from Redragon) but I think they have only linear switches.
Yo! Do u know with keycaps could work on it? Cause I wanna buy one and mod it completely, keycaps, switches but i dont know with (format/type) keycaps are the correct ones
My K630 just stopped working. I was tempted to download the keyboard software from redragon’s website but terminated the installation mid way. And now my K630 isn’t starting anymore. PC is able to tell that a keyboard is attached but no keys are getting registered. 2K ka fatka.. 😢
Thanks for this apprehensible video man...just needed a help of you...i am thinking to buy the REDRAGON CASTRO PRO K631 PRO (White & Green)...Whats your take on this ?
It's a great keyboard tbh, if you want the bling factor. It's got Kailh Hotswap sockets, so any switches will fit. Since it is transparent, thock will be lesser for obvious reasons.
Ok so I dont have X but I just want to say I love the video and I just discovered your channel im pretty new to keybords and the best budget keybord I found was the K630 so I really want my first ever keybord to be the K630 but I dont have the money at the moment since im just a 15 year old kid living in my parents house with my brothers my mom won't bye me one and I really want this keybord for my minecraft setup. I hope you enjoy your day man and hope to so good videos in the future! EDIT!: I have X and I follow you but I cant tag you but I follow you so can I still enter?
Hey thanks to everyone who participated in the giveaway. I have announced the winner over at X and the same has been contacted personally (Twitter).
can you please review the HUO JI E YOOSO Z- 11 mechanical keyboard...
can you please review the HUO JI E YOOSO Z- 11 mechanical keyboard...
can you please review the HUO JI E YOOSO Z- 11 mechanical keyboard...
Ironic how people only remember you exist when their is a giveaway. Lots of love ❤
Theres a giveaway lol
my k630 just got dleivered today, after like 5 minutes of having it i came straight here and started modding, i did the tape and foam mods and its safe to say that it now, THOCCCCCCS
It's such irony that content of this caliber isn't being recommended by TH-cam, but trashy channels are being recommended.
I like how you dive right into the video. No time wasting intros 👍🏼
Sponsorship segments and "subscribe" call-to-actions are best done in the middle or at the end of the video.
Absolute banger of a video man. I've been struggling to figure out which keyboard to buy for my birthday and I'm on a tight budget too, and after this video I'm pretty sure i will get this and add mods over the years. Really it sounds superb.
For sure! Thanks so much
@@rohitagni will be waiting for the giveaway result :D
Dude really nice and quality content 👍
Thank you !
really helpful brother , also got a lot of info about modding keyboards as a newbie
i think that silicon gel is not recommended for lubing switches...it is too thick for switches... it is applicable only for stabilizers ...
Yes it is really thick. I used what I had at my disposal. Slight coating won't be a problem.
Good job dude! Nice content!
Hey i have 2500 INR budget can please suggest best mechanical keyboard SOUND is my priority.. 😊
I have a question, I will give Eva foam as the foam base of my keyboard redragon k630 case. So,what thickness of Eva foam should I choose?
Thanks for the video.
I just bought this practically new for 24 dollars +-, and I was wondering if I could make it sound better.
Greetings from México!
Thinsulate foam makes keyboard sound pop btw i enjoy the process of modding keyboards never ending addiction.😂❤
Very Soon, I am gonna have a mechanical keyboard too. Can't waitttt
i am not able to find any suitable lube in bangladesh.what should i do.where to search for
i bought yesterday reddragon 530 pro. it's pre lubed i think. do you think it's good buy ??
Yes it's a great beginner keyboard
So you basically didn't replace the switches, just a tweak here and there, and you're got a modded keyboard that sounds amazing. How much cost, would you say have gone to the modification process, if you don't mind me asking?
I've already mentioned in the video
I really love the design 😍 Its compact
Hey, what is your mouse mat? I really like it, I've been looking for something like that for ages now.
It's a Felt Pad from Minimal Desk Setups
@@rohitagni Thank you so much!
My k630 keyboard has blue switches with no pins and in my board theres also no pins how?
Hey, super video! I have a similar WK61 keyboard that I would like to mod the way you did. I'm having questions about the lube. Have you tested any other gels/greases besides silicon grease or did any comparison? Will the silicon grease fall off (like settle down at the bottom part of whatever it's applied to) in the long run?
No they don't settle down.
I have problem with my k530 i modded it witn foam and tape and everything was good but when i put stabilizers and switches i have problem that stabilizers ale lower then switch and when i want to put spacebar, enter or backspace keycap its stuck BC stabilizers are lower
My k630 keyboard has blue switches with no pins and in the board theres also no pins what switches do i have?
Hey what is the mm of the screw driver? Also can we use silicone grease for the lube?
yes silicon grease works, multipurpose grease aswell
Can you please help me with the pudding keycaps , where did you get it. Can I get them cheap in India
Buy the red dragon pudding key caps they’re good and budget
Where did u get the keycaps and if any sort of keycaps work on k630 keyboard switches
I mentioned in the video itself, got it from a friend named Sahil Todankar. And yes pretty much all kinds of key caps that have provisions for 60% layout will fit.
@@rohitagni I mean u got any link for INDIA?
Check Amazon / FB Marketplace
Sir you are going to choose winner from TH-cam comment or Twitter ?
The rule is to basically be a subscriber of mine (publicly), and follow me on X. Tag me over at X with a post as to why you want to win the K630.
@@rohitagni Thanks for your reply. But a little confusion. But how will you choose, Are you going to use any random comment picker ? or through other method .
bro love the video ❤ after 7 months how did it hold up? much respect
Is the k630 hot-swappable?
try gmk67 with akko jelly black and budget but good cherry profile keycaps. That will give you the best feel. I had gone through that journey you're going right now for last 3 years....That's why suggesting.
And If possible...please let me know if there any low profile tactile keyboard available in India which will not cost a fortune.
Already used the EK68 from Epomaker (same as the GMK67), it's a good one agreed. As far as the low prof keyboards are concerned, I am aware of only one (K621 from Redragon) but I think they have only linear switches.
That's very delicious to sound😊
Yo! Do u know with keycaps could work on it? Cause I wanna buy one and mod it completely, keycaps, switches but i dont know with (format/type) keycaps are the correct ones
Normal cherry profiles will work just fine.
My K630 just stopped working. I was tempted to download the keyboard software from redragon’s website but terminated the installation mid way. And now my K630 isn’t starting anymore. PC is able to tell that a keyboard is attached but no keys are getting registered. 2K ka fatka.. 😢
warranty me hai to replacement hojayega
Bhai factory reset kar
Esc + fn
Hi, Rohit! Is it possible to do the same modifications to my CB GK-18 Firefly Keyboard? Can I pull out its switches?
If it is hot swappable, then yes. I forgot the recent GK18 is hotswappable
@@rohitagni I'll surely try it then! Thanks! 😊
Thanks for this apprehensible video man...just needed a help of you...i am thinking to buy the REDRAGON CASTRO PRO K631 PRO (White & Green)...Whats your take on this ?
It's a great keyboard tbh, if you want the bling factor. It's got Kailh Hotswap sockets, so any switches will fit. Since it is transparent, thock will be lesser for obvious reasons.
Should i buy Royal kludge m75 ????
it only costs 7000rs......
Yes it's a very good keyboard
@@rohitagnihow about the ajazz ak820 pro? Which is better according to you
@nrn3172 More or less the same keyboard
Do a redragon fizz review
does vasiline work to?
No, not at all.
Next someone's gonna ask can I just spit on it?
Can You spit on it ? @@tanmaydubey5012
@@tanmaydubey5012hawk tuah
Ok so I dont have X but I just want to say I love the video and I just discovered your channel im pretty new to keybords and the best budget keybord I found was the K630 so I really want my first ever keybord to be the K630 but I dont have the money at the moment since im just a 15 year old kid living in my parents house with my brothers my mom won't bye me one and I really want this keybord for my minecraft setup. I hope you enjoy your day man and hope to so good videos in the future!
EDIT!: I have X and I follow you but I cant tag you but I follow you so can I still enter?
You can tag me over at X. And thank you for the kind words
wow
Bro just modded a budget keyboard to top end🫡
That's my speciality 😁 Thanks for watching brother
Why is this video only appearing now 🥲
My k630 keyboard has blue switches with no pins and in the board theres also no pins what switches do i have?
It's mean blue switches has not swappable?
It is hot swap but there is no pins