College is for teaching basics for children... ofcourse one can learn it in 6min, but one can't understand the concept with just 6min. And it's a lot of different getting a D or a A in grades. If one cant teach others the subject then one havent learned anything.
Helpful video diploma engineering study for students,, I was watching the video I am from Bangladesh,, Refrigeration and air conditioning, I want about all engine video
Temperature does not change during a phase change. All the condenser is doing is changing the refrigerant from a vapour to a liquid. The temperature will be reduced at the expansion valve when the pressure is also lowered.
The process takes place in the condenser is only reducing the latent heat. Latent heat is the energy absorbed or released by a system during constant temperature.
hello im new just trying to understand of where the low temperature goes to the container of the refrigerator and is should have a exhaust of this thing?
My question is how Superheared refrigerant get cool more than surrounding temperature in condenser..... For cooling condenser use air medium, den how v get cool effect
at 3:36 after condensing process, it should have the low temperature and low pressure, right? if not then would you mind explaining me here on comment section. btw, great animation video. Keep it up
High pressure high temp vapour enters into the condenser and condenser take the latent heat of vapour. Vapour exit in liquid form. But temp remains same. How? Heat is extracted from vapour then why temp not falls?
I understand your question bro, if see the video they have just started from the topic of VCRS, but in this video they have not thought the basic behind using only these components. So if you know what is the basic principle that to be needed for us to produce cooling effect you will get know the answer.
I also agree with your statement,it allows only low temperature at the condenser output, pressure is entire cycle constant,its an isobaric process. condensor first remove super heated steam/vapour,later at a certain instant of time latent heat removal,or it means it achieved saturation temperature, after that the refrigerant turns to a sensible temperature or in sub cooled state only.always saturation temperature should be greater than the sub cooled temperature. If the difference between the saturation temperature and the subcooled temperature is less than 10degree Celsius, we can say that defficiency of refrigerant inside the compressor. Always the compressor has to maintain 10 degree Celsius minimum for proper cooling.
3 hour's of lecture topic is completed within 6 min. With better explanation then college professors 🙂
❤
That’s why I just study online
I agree
And correctly 😊, cuz my extremely intelligent teacher said that the output through condenser is in vapour form 😊
College is for teaching basics for children... ofcourse one can learn it in 6min, but one can't understand the concept with just 6min. And it's a lot of different getting a D or a A in grades. If one cant teach others the subject then one havent learned anything.
Okay so I learnt an answer to a question in just 6 minutes, perfect!❤️
Hu kanamma kalthe
Internals ge naanu ondu question kalthe😃😃
I need some notes of ur college can u help me ??? I'll send my email address
me too
Yep naale Nandu exam ide
Very simple, concise and straight to the point. I now have better understanding on how the cooling came about.
I should've watched this before starting my lab report. Thank you, helped tremendously.
Yes
Thank you, this video explains the process more clearly than a lot of other videos that I have seen.
Thank you for your explanation with a short period of time. Now I have clarity about how it will works
I have also learnt very well in just 6 minutes.
Thank you very much
It is very nice and good explanation than politecnic professors...I understood everything..
This video is really helpful. Many thanks to the creator! ❤️😍
Explanation 🔥🔥🔥🔥.....
Thank you very much mam ❤️to explain in such an easy way
This is very helpful to me it is very tremendous work.
I have understood it very well...thank you.
Good lecture and it is very understandable
thank you very helpful for my college classes.
Best explanation thank you ma'am
Very nice explained in simple and easily understandable English
Thank you..
Thank you , you have explained it so well
Very informative, easily understood in a non technical manner.
Thank u very much highly commendable
Very helpful. Thank you so much.
Thank you for all the useful information! !
Thank u for ur explanation, I need this topic use for present my job
Very useful, thanks very much.
Your explanation of the useful for the iti training students. Thank you.
Outstanding
Thank you so much
❤❤❤❤❤❤ clearly understood
very useful video and understood concept easily!👌
really more useful...for better understanding✌
Amazing your explanation keep it up
I really very well explained ❤❤❤❤ thank you ma'am ❤
Nice Explanation Mam...
Helpful video diploma engineering study for students,,
I was watching the video I am from Bangladesh,,
Refrigeration and air conditioning,
I want about all engine video
Really understandable. Thank you!!
Watching only 15 min before exam thankyou i understand everything
Good explain for student.
Ma'am ❤️.. thanks 🥺
why is the refrigerant temperature still high after passing through the condenser, isn't it supposed to be cooled there?
Listen carefully
Temperature does not change during a phase change. All the condenser is doing is changing the refrigerant from a vapour to a liquid. The temperature will be reduced at the expansion valve when the pressure is also lowered.
The process takes place in the condenser is only reducing the latent heat. Latent heat is the energy absorbed or released by a system during constant temperature.
very good hvac trobleshooting
simply WOW
Very good ☺️😊
Wonderful video 👍
Anyone from Mangalore
Very lucid explanation.
Nice work 😀👍 keep going
Very helpful
Amazing 😍
Good work keep working in same way 👍
Very well explained!!!!
Crystal clear!!
Good information
Best explanation
Really understanding
How if we use the 5:55 vevaporator to operate at Hot area?
How many COP will be created?
Thank you so much
Thank you..
It was very helpful.
Very nicely explained
Very helpful thanks
Excellent explanation. Thank you👍👍👍👍👍👍👍
It is easy understand thank you so much 🙏🙏
Thank You...Mam..
What if there's no compressor? What will happen?
The refrigerant leaving the condenser is high pressure low temperature liquid
Helpful
excellent explained
Thanks for your video
Great video
excellent
Twas very helpful thanks
Really nice video for understanding
hello im new just trying to understand of where the low temperature goes to the container of the refrigerator and is should have a exhaust of this thing?
Please can you share us how to make the design and assemble it. thanks
Nandri
Finally I get it
Fabulous
Thank you for sharing
Thankyou
very nice video bro
Thank you
Well explained
Thanks
Thanks mam...!
tank you
Nice
Very nice🔥🔥🔥
My question is how Superheared refrigerant get cool more than surrounding temperature in condenser..... For cooling condenser use air medium, den how v get cool effect
It'll still be better than the surrounding temperature, it's just cooled enough to become a liquid so the expansion valve can expand it
Doesn't that mean only heat from inside is dispersed while hwat from compressor is despersed
Very Informative 👍
Super
Hi! can I use this video in my class. I will be using livestream platfrom in facebook group.
good
After Condenser only pressure high, but temperature low
at 3:36 after condensing process, it should have the low temperature and low pressure, right? if not then would you mind explaining me here on comment section. btw, great animation video. Keep it up
No. Only the phase change of the refrigerant occurs, that is, from vapour state to liquid state. It still has high pressure and high temperature.
@@STARAQIL oh I understood. Thanks a lot man
@@rajeshraya4775 the expansion valve decreases the pressure and lower pressure results in lower temperature
@@STARAQIL 👍
i got the same question, also in the evaporator, i thought pressure changes with temperature?
Wooowww😄❤
High pressure high temp vapour enters into the condenser and condenser take the latent heat of vapour. Vapour exit in liquid form. But temp remains same. How? Heat is extracted from vapour then why temp not falls?
I understand your question bro, if see the video they have just started from the topic of VCRS, but in this video they have not thought the basic behind using only these components. So if you know what is the basic principle that to be needed for us to produce cooling effect you will get know the answer.
I also agree with your statement,it allows only low temperature at the condenser output, pressure is entire cycle constant,its an isobaric process. condensor first remove super heated steam/vapour,later at a certain instant of time latent heat removal,or it means it achieved saturation temperature, after that the refrigerant turns to a sensible temperature or in sub cooled state only.always saturation temperature should be greater than the sub cooled temperature. If the difference between the saturation temperature and the subcooled temperature is less than 10degree Celsius, we can say that defficiency of refrigerant inside the compressor. Always the compressor has to maintain 10 degree Celsius minimum for proper cooling.
How many COP can be reach?
good...
home load/bill malom karain..
channel "knowhow Spirit".
Why can't you remove the condenser and go straight to expansion valve ?
No phase change happened
How Heat will be generated in compressor
Sorry I need to learn this technician I need teacher
man i know theres gotta be better AI voices than this man