I'm a DeWiz user and I appreciate these webinars. It would be helpful if you would actually show how to set the values in the app... there are upper and lower limits and I've tried to set them with mixed results. Sometimes my swing values are within the upper and lower range but the device still tells me it was a "bad" swing. I'll bet other users want help in knowing how to best set the values. You could show a few examples of over the top swings and swings too far from the inside and how to set values for each.
Hi Eric, thank you for the comment and the feedback as we continue to try and make these webinars as valuable as possible for our users. As Markus alludes to at the end of the video, when looking at your Transition parameters, start by identifying what your general miss is. If you're a right-handed golfer and your general miss is off to the right (whether that be a slice or a general push), take your Transition measurement and try to lower it by an inch (3cm). So, if your Transition on a mishit is around +2 inches, try to set your upper limit to +1 inch, and leave the lower limit off. Reverse this process if your miss is a pull or a hook. Feel free to reach out to me (matt@dewizgolf.com) and I'd be happy to answer any additional questions you may have!
@@deWizGolf Thanks, and you just provided additional information that i haven't seen anywhere else: you said to change the upper limit and "leave the lower limit off." That's helpful, and it woudl be even more helpful if you explained why. Is it ok to set an upper and a lower limit? If not, why not? I had my lower limit set to -1 and my upper limit set to +1 and my transition was reading around .05 but i was still getting a "bad swing" sound and i can't figure out why.
the description of swinging back towards the heels on transition is a great feel to have for me.will work on this thanks John
I'm a DeWiz user and I appreciate these webinars. It would be helpful if you would actually show how to set the values in the app... there are upper and lower limits and I've tried to set them with mixed results. Sometimes my swing values are within the upper and lower range but the device still tells me it was a "bad" swing. I'll bet other users want help in knowing how to best set the values. You could show a few examples of over the top swings and swings too far from the inside and how to set values for each.
Hi Eric, thank you for the comment and the feedback as we continue to try and make these webinars as valuable as possible for our users. As Markus alludes to at the end of the video, when looking at your Transition parameters, start by identifying what your general miss is. If you're a right-handed golfer and your general miss is off to the right (whether that be a slice or a general push), take your Transition measurement and try to lower it by an inch (3cm). So, if your Transition on a mishit is around +2 inches, try to set your upper limit to +1 inch, and leave the lower limit off. Reverse this process if your miss is a pull or a hook. Feel free to reach out to me (matt@dewizgolf.com) and I'd be happy to answer any additional questions you may have!
@@deWizGolf Thanks, and you just provided additional information that i haven't seen anywhere else: you said to change the upper limit and "leave the lower limit off." That's helpful, and it woudl be even more helpful if you explained why. Is it ok to set an upper and a lower limit? If not, why not? I had my lower limit set to -1 and my upper limit set to +1 and my transition was reading around .05 but i was still getting a "bad swing" sound and i can't figure out why.