Great video Finally,after 9 or 10 videos i found yours and it exactly explained what i was after: i wanted to make Solar Power the Primary Power, and ONLY your video explains it clearly; thanks
Nice; video, stright forward to think of myself as "smart-er" now; can you manually set it to one and then kick it for the other? Or does it have to be set to grid and kick in for backup?
Thanks a lot for this video, its very helpful and Informative. If it has a diagram included, that will be very much appreciated though its already much appreciated.
Is it not possible to provide a modified sine wave inverter for source B? When the inverter is turned on, there is a loud noise. (when source A is not set to Auto) Is that because of modified sine wave? Normal ceb power is given to Source A. When both Source A and B are given, when A is missing, Auto will come to B. But when source B is turned off and ceb power is lost, when source B is turned on, source B does not fall in auto, there is a loud noise. Why is this happening? Pure sine wave will be fine?
GOOD DAY SIR BOSSING ASK KO PO ANO KLASE SOLAR PANEL PARA SA HOUSEHOLD NA MAY CONSUMO NG IVERTER REF 1HP AC 3/4 AC ELECTRIC FAN WASHING MACHINE AT LED LIGHTS BULB MAGKANO PO KAYA SOLAR PANEL? TNX PO?
BTW, if you want 220/240v in the US 220v P2 is for euro countries not the US. Euro uses a single hot wire 220/240v, US uses 2 hot wires. From what i was told. So US needs a 220/240v P3. If I was told wrong, please correct me
My question is, the N side of my switch the UN light is on but the NON light is not and when i turn on my generator the R side both lights are on but on the N side only one and it hum like hell, what is the cause of this please.
This explanation is incorrect, because the internal parts were assembled inside a small box, while we want the explanation to be by reviewing each piece of the device independently.
@@Theo-de-Koning It seems that you do not know what the ATS system is, for example, it consists of contactors, phase fillers and others. As for what is explained in the video, it is brief in a small device with few specifications.
is there any solution about the power interruption? Switching from another source from the other is fine. but how to get rid of the interruption? I want to switch power source without interrupting the power in the Load.
@@mohmad2822 even when its automatic, it will still interrupt the power flow in seconds.. that what I want a solution. Switch the power source without interruption of power flow, even in milliseconds.
@@deepakprasanna7680 If the transfer switch you have is like the one in the video, then this device suffers from a slow transfer between two power lines. Because it contains a normal circuit breaker, the conversion process will be fast when it is through the "Relay" or "Contacto"r.
@@deepakprasanna7680 It must be box inside electronic components and the conversion is via relay inside it, and it does not contain the option of manual switching, I cannot mention a specific brand because I am from the Arab world and we do not have a brand available all over the world and there are no local companies in the West that manufacture like the one we have except rarely, I suggest that you make an ATS system that will be a "Change Over" without electronic components, sturdy and easy to maintain. This is the best option at all.
You switched the R and N around. N= Grid power, as this is your normal power. R= RESERVE power, which is your inverter or generator. You should swap your connections
@0.45 N is said to be off grid power supply and R as Utility supply. Later on in the video @ 2.47, it's contrary!!!!! Do it correctly guys, the world is watching 😠
i think that's 2 videos in one; the second part shows it wired to Prioritize the Public Utility Power, and the Solar Power,the secondary power; The first part was the inverse, the Solar Power was the Primary power,; this is the way i have it in my house now.
The only video that made sense. Thank you 🇿🇦
Great video
Finally,after 9 or 10 videos i found yours and it exactly explained what i was after:
i wanted to make Solar Power the Primary Power, and ONLY your video explains it clearly; thanks
th-cam.com/video/sD9dxx7t_fs/w-d-xo.html
The only video where one can clearly see the output wiring to the load! 👋👋👋
Nice; video, stright forward to think of myself as "smart-er" now; can you manually set it to one and then kick it for the other? Or does it have to be set to grid and kick in for backup?
Can this device also be used in a dual 12v DC input setup that powers a DC fridge?
Thanks a lot for this video, its very helpful and Informative. If it has a diagram included, that will be very much appreciated though its already much appreciated.
Can you explain the wire connections from main circuit board pls. It doesnt make sense to me, don’t know where it was connected
indeed, MAKE BEFORE BREAK IS BETTER THAN BREAK BEFORE MAKE SCHEME !
Will it work with Enphase system and their microinverters?
For winter its good especially in RSA with bigger Storage Battries 30kw system any stage youl be safe
Is it not possible to provide a modified sine wave inverter for source B? When the inverter is turned on, there is a loud noise. (when source A is not set to Auto)
Is that because of modified sine wave? Normal ceb power is given to Source A. When both Source A and B are given, when A is missing, Auto will come to B. But when source B is turned off and ceb power is lost, when source B is turned on, source B does not fall in auto, there is a loud noise.
Why is this happening?
Pure sine wave will be fine?
GOOD DAY SIR BOSSING ASK KO PO ANO KLASE SOLAR PANEL PARA SA HOUSEHOLD NA MAY CONSUMO NG IVERTER REF 1HP AC 3/4 AC ELECTRIC FAN WASHING MACHINE AT LED LIGHTS BULB MAGKANO PO KAYA SOLAR PANEL? TNX PO?
BTW, if you want 220/240v in the US
220v P2 is for euro countries not the US. Euro uses a single hot wire 220/240v, US uses 2 hot wires.
From what i was told. So US needs a 220/240v P3.
If I was told wrong, please correct me
Can we see how it’s connected to the panel ? It doesn’t make sense to me
Hey could something like this work to Power air condition by solar?
Can you recommend me or link me, if there is an ATS that is higher than on your video? like 200amphere rating and higher ATS. Thank you, Stay Safe!
My question is, the N side of my switch the UN light is on but the NON light is not and when i turn on my generator the R side both lights are on but on the N side only one and it hum like hell, what is the cause of this please.
This explanation is incorrect, because the internal parts were assembled inside a small box, while we want the explanation to be by reviewing each piece of the device independently.
For using that ATS is not needed to look in the inside.
The same when you install other equipment like converter, battery etc.
@@Theo-de-Koning
It seems that you do not know what the ATS system is, for example, it consists of contactors, phase fillers and others. As for what is explained in the video, it is brief in a small device with few specifications.
What is the difference between this and a *digital transfer switch?*
If the solar power is coming from battery storage, how do you tell the switch when to switch power source to prevent killing your batteries?
Read there "solar power SYSTEM".
Battery protection is in THAT system.
Question please. What if solar only generates 80%? Can Emergency supply the extra 20%? Or is it only one or the other?
1 or the other not both
Can this transfer switch power the entire house or is it used as a single outlet (1 breaker).
It will supply the entire house.....but not 220/240 as I believe you will need a 3 phase transfer switch like this one.(hot, ground, neutral)
@@jedidiah5131
Can you give me a link to an article in Wikipedia about the line hot stream? Because I searched this site and couldn't find it.
Good explanation
Where to buy the apparatus?
can this work with 12v
When we buy that?
can I use backup line with DC voltage
Hello this is only for AC
backup MUST be AC so use a DC to AC convertor if you want DC as backup
Available in Bangladesh???
10Q very much
is there any solution about the power interruption? Switching from another source from the other is fine. but how to get rid of the interruption? I want to switch power source without interrupting the power in the Load.
The device must be automatic.
@@mohmad2822 even when its automatic, it will still interrupt the power flow in seconds.. that what I want a solution. Switch the power source without interruption of power flow, even in milliseconds.
@@deepakprasanna7680
If the transfer switch you have is like the one in the video, then this device suffers from a slow transfer between two power lines.
Because it contains a normal circuit breaker, the conversion process will be fast when it is through the "Relay" or "Contacto"r.
@@mohmad2822 good idea.. if you don't mind, can you refer to some model or brand with the same capacity in video? thankx a lot.
@@deepakprasanna7680
It must be box inside electronic components and the conversion is via relay inside it, and it does not contain the option of manual switching, I cannot mention a specific brand because I am from the Arab world and we do not have a brand available all over the world and there are no local companies in the West that manufacture like the one we have except rarely, I suggest that you make an ATS system that will be a "Change Over" without electronic components, sturdy and easy to maintain. This is the best option at all.
Ilang amper po
How to buy?
Kaha pe milata hai
2 meter 1 genaretor auto change over connection plz🙏🙏
Paano kng sa genset mo starter paano Aandar un
You switched the R and N around. N= Grid power, as this is your normal power. R= RESERVE power, which is your inverter or generator. You should swap your connections
Because he wanted SOLAR as primary
@@vet137 doesnt matter, its still switched around. A C.O.C will not be issued this is not industry std connections
@@vanstaden but I would do the same in a diy solar system, use solar and batteries until they're depleted and switch to mains then.
@@MisterPikol ? Wtf....
Great product..
UNFORTUNATELY...the 'buy it' LINK above doesn't work.
Company Out of Business?
There are many sellers. All sell rebranded. I just bought 1 from Amazon
How to apply a 3min delay time while switching both sources?
output wire it to a timer first maybe
can't
Sir can we use gerator set for the reserve power
Of course you can. You'll just have to set the switch to manual instead of automatic.
@@klon2ha Why yo manual
no neutral or ground?
"No neutral"?
What is then coming true the cables?
Ground is always separated and is local. May NEVER have a switch.
But how much?
look it up....
@0.45 N is said to be off grid power supply and R as Utility supply. Later on in the video @ 2.47, it's contrary!!!!! Do it correctly guys, the world is watching 😠
i think that's 2 videos in one; the second part shows it wired to Prioritize the Public Utility Power, and the Solar Power,the secondary power;
The first part was the inverse, the Solar Power was the Primary power,; this is the way i have it in my house now.
@@josepeixoto3384 Cool to know I will hookup my Solar Convertor to the Primary now
NICE
Good wok
Hmkol Lena hai
Next to useless for actually installing one, huh?