ฝัง
- เผยแพร่เมื่อ 11 ต.ค. 2019
- In this video you will learn how to oil your sewing machine. Other recommendations of cleaning and oiling the sewing machine are on my website.
Want to see how to lubricate the sewing machine correctly then watch this video. You will learn how to lubricate all the mechanisms of the sewing machine located inside the housing.
Your sewing machine is too noisy works? In this case you need to clean and to oil the sewing machine. In this video you will find instructions of oiling all rotated details the sewing machine including the details that are located inside housing.
Every model of sewing machines needs periodic lubrication and cleaning, anyway some mechanisms. Particularly often needs oiling for older models of sewing machines having only metal parts. After lubrication such sewing machine will work gently and more quietly.
Note: Some modern models of sewing machines do not need to be lubricated. Before oiling you modern sewing machine looks into manual. But any sewing machines require periodic removing dust and threads scraps from feed dog areas and shuttle device.
Way too much oil being used. One drop at each lubrication point. Also, you must clean everything first. Poor video.
Good idea with the syringe needle. Now how to take it apart you forgot to show that part?
Lots of oil I think was being used. Where does it go?? You should have shown step by step of where to oil.
I guess I am ocd. I would have cleaned everything good first. Especially all that lint I the one area.
Me too. It looks so dirty and old
All that lint will create a problem with the machine after it’s oiled.
It won't, your sewing machine in perfect condition is. And this sample has worked for more than 25 years.
I applaud the enthusiastic olier. But, with oil, a little goes a long way. Maybe just a tad less in most of the spots covered here. :)
I cringed at the amount of lint that wasn’t cleaned before the oil. 🤦🏾♀️
You are right, this is our mistake, thanks.
Thank you..
hey uh all that lint should be cleaned out first
Sorry, this video was filmed by a our mechanic. He loves his job but does not understand well in a beautiful picture for video
@@sewway it sounds like you don’t know how to use language skills very well because your reply makes no sense.
I heard that machines should be decreased and cleaned of lint before oiling.
The sewing machine looks so neglected. Dust, dirt and rust everywhere. Was it kept outside? And is not required to clean it before oiling?
Sorry, the master took an old sewing machine out of the closet and showed the units that need to be lubricated. We already told him what a slob he is.
You should clean it with a rag before applying oil. But don't use water (You can use the same lubricant oil to help you clean because it loosens the dirt).
I would really just clean out the fluff and dirt before greasing and oiling any machine. The grime will clog your machine, no matter how much oil you give it. I am sure that you drain the oil from your car engine every 15000 or 20 000km before you add new oil? Treat your machine with the same consideration. Blow out the fluff regularly, clean your bobbin casing and feeder feet at least with every 3rd full bobbin completed. It takes a few minutes but will add years to your machine's life. Also, with so much oil as given in the video, you should let your machine run for a few minutes, then let it stand for a day or two so that all the oil can drain. Then clean it thoroughly before putting any fabric under the needle.
Thank you, that's right.
The hand wheel on my singer Futura 350 is very tight and the machine wont sew. What do i do. can i oil it?
The flywheel is attached to a main (top) shaft, which has many connections to other joints. Maybe you just need to oil all the parts of your sewing machine and it will work easily.
If your machine is electronic, you should not oil it, but take it to a dealer before doing anything. You can oil mechanical machines, though. Just not as liberally as what's shown in the video
Hey , what is the Type of Grey grease do use use ? Thanks
Graphite grease
Hi, what grass use thanks
Thanks, that's the right question. For regular lubrication, only use special oil is used for oiling sewing machine.
lubrication of many mechanism and joints is required in exceptional cases when the machine is very old.
I use a special graphite grease to lubricate the gears.
This is a very clever and realistic video that shows how to lubricate specific points .Those who want to watch cleaning need to go a way.
Thank you, this is what our master was thinking about when he shot this video.
Cleaning the machine is a very necessary “part of oiling it”. The video leaves the impression that it’s okay to oil a machine full of lint!
@@dianewest3160 The gentleman is trying to show how to lubricate the machine. By the look of it, the machine is out of commission anyway.
Filthy machine. Needs a thorough cleaning!
Awwww, just dip it.
Words instead of music. I can't read and watch at the same time.
I can't speak and hear and I can't see well. I make these videos with the last of my strength for free for you, what claims can be
That machine is very dirty all that dust and dirt is going to mat up on that oil. That will cause a problem
Pretty dirty machine, is it too much oil?
Ugh why did you not clean the machine first . It’s looks mucky
Because the master who showed how to oil the sewing machine was almost blind.
That poor machine - do you not own a cleaning brush?
This machine is the scrap for work is not used, but only as an exhibit to demonstrate to YOU the process of oiling the sewing machine
@@sewway Well *_YOU_* only demonstrated half the process, to those less experienced with machines.
All my videos are for beginners. Well, what's wrong with that?
@@sewway you teaching them to damage their machines by oiling the lint into the moving parts?
The video is designed for sane people who are used to washing their faces every morning. It's a natural desire to be clean. And this is just a lubrication scheme, not cleanliness lessons
I literally just spray all purpose lubricant and penetrating oil and call it a day 👍