It was as simple as an auxiliary switch change assignment. Moved it from the VRA dial to the SWC 3-way switch and problem solved. Not sure why they don't do that to begin with. The tune they installed in the radio had it all messed up as well.
Hey Denny How Are ya i just now i saw this issuse But i think the machine is fine the problem from the Radio Because sometimes this Radio model comes with much problem You know? Try Change the radio And put FS I6S on this machine And test her Again So Good luck Buddy😊
I solved the issue in the video. Hard reset and wipe radio settings and start over. All works fine with this radio now. ST-8 has a total of 9-10 mixes and runs a 12CH receiver. Huge plus over the FS-i6S with only 4 mix capability. It is just like anything new; it takes some getting used to and learn how to navigate them. I was a little overwhelmed at first, but the more I worked with the radio the more I learned.
Think i'm going to go with the kabolite 961-100s. Little cheaper and been through a few revisions. I use to have the MTM 946 but found that I dont play with them enough to justify the price for the $4k ones. I would love to that new drag line but again $6k for something I just tinker with is too much.
@Sublimescatty I think the Kabolite 961 is just a glorified K336. I have had 2 of them and still have one. If all you wanna do is play in crumb rubber, very loose dirt, they are fine.
@dennybobsrcconstructionagc2796 that's right they are!! I thought they were French for some reason there. I only ever see their Cranes here don't ever see their equipment 🤷🏻♂️
you gotta love all the kludgy workarounds they do with the sound system on the pot...
It was as simple as an auxiliary switch change assignment. Moved it from the VRA dial to the SWC 3-way switch and problem solved. Not sure why they don't do that to begin with. The tune they installed in the radio had it all messed up as well.
Can i use a lipo battery and also may i know the dimensions of the battery
Hey Denny How Are ya i just now i saw this issuse But i think the machine is fine the problem from the Radio Because sometimes this Radio model comes with much problem You know?
Try Change the radio And put FS I6S on this machine And test her Again
So Good luck Buddy😊
I solved the issue in the video. Hard reset and wipe radio settings and start over. All works fine with this radio now. ST-8 has a total of 9-10 mixes and runs a 12CH receiver. Huge plus over the FS-i6S with only 4 mix capability. It is just like anything new; it takes some getting used to and learn how to navigate them. I was a little overwhelmed at first, but the more I worked with the radio the more I learned.
@dennybobsrcconstructionagc2796 very well Denny 👍 We Can see her Work next vid 👐😊
Think i'm going to go with the kabolite 961-100s. Little cheaper and been through a few revisions. I use to have the MTM 946 but found that I dont play with them enough to justify the price for the $4k ones. I would love to that new drag line but again $6k for something I just tinker with is too much.
@Sublimescatty this one was $1800.00 USD to my door.
@Sublimescatty I think the Kabolite 961 is just a glorified K336. I have had 2 of them and still have one. If all you wanna do is play in crumb rubber, very loose dirt, they are fine.
@@dennybobsrcconstructionagc2796 It is, yes. Let me know if this one digs better!
Dennis, now remember Liebherr is French 😂 you changed em then got the French controls
Liebherr is German/Swiss company. 😉
@dennybobsrcconstructionagc2796 that's right they are!! I thought they were French for some reason there. I only ever see their Cranes here don't ever see their equipment 🤷🏻♂️
Your thinking of poclain they were french excavator's
@RayHogarth then they were bought by CASE in 1974.
Do some digging test i wanna buy one of that
@Abulho sadly, the ground is frozen here.
@@dennybobsrcconstructionagc2796that’s sad