It's helped me so much. Keeps the wire contained while pulling it. It's easy once dialed in. Just turn in a 5 gallon bucket of wire for $295. Just do it when I find extra wire 🤷♂️😆
Looking good. Consider a cheap hand crank winch. Attach the winch cable to vice grips to clamp the stripped wire tip. Curl the tip for better grip. Run the wire through a cheap funnel (the same type for adding vehicle fluids) securely attached to the board. No kinks = no hassles. Larger channel in the board with easily removable sheet tin used as a filler to accommodate smaller wire. Wind the bare wire on to different diameter spools with a missing tabletop edge. Slide it all in to a 5 gallon bucket. Huge space saver! Turbo mode engaged.
Does it not dig into the copper wire a snag seems you are using the flat part of the razor instead of just the pointy tip? I have tied and both processes snag a lot
The angle of the blade has to be perfect that's why I hold it by hand while pulling it through. I know everything what you talk about. When the wire is very fine that is more of a problem. The thicker the wire the easier it is.
I believe melt the copper and two bars Heaven certified put in the vault. Get the value of copper up for one ton $2 million Is a longshot it’s worth it
@@xyzabc4178 I thought some was. I guess the recycling program must struggle with people putting non recyclable good in all the time, hell I can't get my wife to stop putting mylar potato chip bags In recycling 🙄🤣
Recycling is a huge scam. Cities are paying contractors huge money to collect "recyclables" and in the end it all goes into the regular trash anyway. This is a rabbit hole if anyone cares to go down it.
Nothing like smoking some fentanyl after a hard nights work, stripping wire and cutting catalytic converters with the sawzall or better yet exhaust tube cutter 😌
Why not recycle the plastic? I mean I’m sure it would be like 10 cents for like a trillion pounds. The way things are going in the country right now money is money.
Exactly my point. Very cheap and renders pounds for me. All told I've done a few thousand feet of wire and it only cost me a pice of scrap wood and a filler wire.
With a last name Niggeltz, and the Afro reference idk what to think 🤣. I'll tell you I've stripped hundreds of dollars of copper this way. It works great 👍
@@Oneminutetofixit hundreds of dollars? Ok thats gotta be a record! Whats that about 20 ft because i mean ya im bored so whynot flame the guy with some plywood scraps a cpl screws and a utility knife blade! Lol!
@@StonemanRocks that's like saying a pencil never figured out the most complicated expensive problems known to man. Doesn't have to be a thousand to make a thousand 🤡
@@Oneminutetofixit i stand corrected! I mixed you up with that other guy who is equally as talented with his wood much like yourself! Keep it up! Lol if it works dont fix it .
Dang dude you got a patent on that guiding mechanism?
Boomhauer - Dang ol’ technology, man, it’s supposed to make our lives easier, but all it does is give us more dang ol’ passwords to remember, man.
This is awesome! Been stripping wire like a caveman for a while so imma have to steal this!😂😂😂
It's helped me so much. Keeps the wire contained while pulling it. It's easy once dialed in. Just turn in a 5 gallon bucket of wire for $295. Just do it when I find extra wire 🤷♂️😆
@@Oneminutetofixit thats great! Hope it works just as well for me!
Looking good.
Consider a cheap hand crank winch. Attach the winch cable to vice grips to clamp the stripped wire tip. Curl the tip for better grip. Run the wire through a cheap funnel (the same type for adding vehicle fluids) securely attached to the board. No kinks = no hassles.
Larger channel in the board with easily removable sheet tin used as a filler to accommodate smaller wire.
Wind the bare wire on to different diameter spools with a missing tabletop edge. Slide it all in to a 5 gallon bucket. Huge space saver!
Turbo mode engaged.
I like the constructive advice. There is always was to improve and advance a system. I will employ them if I can.
How much more do you get if its stripped??
Nice. I’d like to see it in action
Can we see the process in action?
It's very complicated. The camera can catch the machine working.
Its very um complicated so no you cant? Lmao!
If you use a pipe cutter wheel and a spring in that v groove. It self adjusts
Pretty smart set up, trying to do something similar
I works great!
Dude thats a good idea!!
It's made me hundreds and cost me pennies👍
Does it not dig into the copper wire a snag seems you are using the flat part of the razor instead of just the pointy tip? I have tied and both processes snag a lot
The angle of the blade has to be perfect that's why I hold it by hand while pulling it through. I know everything what you talk about. When the wire is very fine that is more of a problem. The thicker the wire the easier it is.
I have a wire striper 3 phase can strpe 2 spools at 2 1/2 tons apiece in 2 days 1/1/2 it can stripe 4 inche wire!
Cost money to run those, makes big money when it runs.
if it works it works
Last 5 gallon bucket of copper paid me 296. I just slowly collect it over a year, like a piggy bank.😆👍
#mocoppermomoney
Way to not show your genius blade mechanism.
I don't see anybody stealing your patent. Why didn't you just show us the rig in action?
When I started making videos, I didn't have a tripod.
I believe melt the copper and two bars Heaven certified put in the vault. Get the value of copper up for one ton $2 million Is a longshot it’s worth it
Great tip
Simple, easy, and makes money.
How do u dispose of all you plastic sheath? Thanks 👍✌
I put it in the residential recycling pick up .
@@Oneminutetofixit it’s not actually recyclable. Please put in the normal rubbish/garbage
@@xyzabc4178 I thought some was. I guess the recycling program must struggle with people putting non recyclable good in all the time, hell I can't get my wife to stop putting mylar potato chip bags In recycling 🙄🤣
@@Oneminutetofixit 😆😆
Recycling is a huge scam. Cities are paying contractors huge money to collect "recyclables" and in the end it all goes into the regular trash anyway. This is a rabbit hole if anyone cares to go down it.
I have so much copper. Would I lose a lot of money not stripping it all?
Cut your profit by half
Nice man!
Works great on any wire.
Thieving Lineman or Narrow Back?
🤣neither. Backhoe copper mining 😂
@@Oneminutetofixit haha
Nothing like smoking some fentanyl after a hard nights work, stripping wire and cutting catalytic converters with the sawzall or better yet exhaust tube cutter 😌
Wow, I like just collecting copper for $$$. You should look into getting help If that's all you think about.
👏👏👏👍👍👍
Why not recycle the plastic? I mean I’m sure it would be like 10 cents for like a trillion pounds. The way things are going in the country right now money is money.
It gets recycled when it hits the trash processing center. The companies have to go through everything before it gets to the fill.
Copper prices here $5.50 per lb
WOW!!! At the time of the video, it was 2.85🤦♂️
May manananso din pa lang porener..
Nice demonstration 👏👏👏🤦🏽♂️
Yeah I know it hard to imagine how to hold the blade and pull the wire 🤦♂️
@@Oneminutetofixit Yea it's real hard to imagine 🤦🏽♂️ It's not about that 🫏 It's about how efficiently it works 🤡
@@Oneminutetofixit
Can we bolt the knife or just the blade instead of holding it ?
Bravo for the initiative pal!
@joestalin2375 I found that with different wires and coating thickness, it's easier to hold, so the angle can be changed to shave it properly 👍👍
@@Oneminutetofixit
I understand .
maybe a rig for each different size wire,and pull them with a motor ?
💡! 😃🎉
Thomas Edison would be proud
Медяху везде любят 😊
If it works for you then why not . COPPAH
Exactly my point. Very cheap and renders pounds for me. All told I've done a few thousand feet of wire and it only cost me a pice of scrap wood and a filler wire.
I would love to see it in action
Afro engineering right here
With a last name Niggeltz, and the Afro reference idk what to think 🤣. I'll tell you I've stripped hundreds of dollars of copper this way. It works great 👍
@@Oneminutetofixit hundreds of dollars? Ok thats gotta be a record! Whats that about 20 ft because i mean ya im bored so whynot flame the guy with some plywood scraps a cpl screws and a utility knife blade! Lol!
@@StonemanRocks that's like saying a pencil never figured out the most complicated expensive problems known to man. Doesn't have to be a thousand to make a thousand 🤡
@@StonemanRocksand BTW you must be really unable if you can't tell that is a 2x4 not plywood 🤪
@@Oneminutetofixit i stand corrected! I mixed you up with that other guy who is equally as talented with his wood much like yourself! Keep it up! Lol if it works dont fix it .
Interesting
😂😂😂
😂
Pathetic - waste of Filming if you can’t be bothered to actually show it in use.
You must be one of those who constantly needs hand holding and diaper changes 🤣🤣🤣
Yeah boy! Meth doesn’t pay for itself, get to it!
Is that what you spend your money on? To bad that's all you think about, find some help.
Every channel has to have a local looser...
You have of video of it in use?
I think so. If not, I will make one soon. Stay tuned!!
I do have a video!! It's like 40 videos down with a different angle of the setup!
@@Oneminutetofixit what’s the name so I can find it faster?
Strip wire Sunday, recycling copper. Should've just done that to begin with 🤣🤣👍
Lmao ! What a hack!
The cheap things that make me hundreds are the best. Go buy a thousand dollar machine and start out in the hole. Lmao
@@Oneminutetofixit ok cowboy talk to me in 20 yrs!
He won’t have time to. He’ll be busy counting all his money he made and saved.
@@StonemanRocks no I didn't want to talk to you in the first place 🤣