Thanks really i just spend like 30 mins trying to figure out how to program my controller and then i just watch your video less than one minute really really thanks
How can the Liftmaster 892L be programmed for the DoorKing 6003 gate opener? Is there a learn switch on the Doorking control panel? My current Liftmaster 892L has two buttons to open the garage and the gate. I needed another remote, and can only get the garage door to program. I could not program the new Liftmaster 892L for the gate by using the old/current 892L remote.
If you have an 892lt that was originally set up from a dip switch remote then yes you can use the 892 to teach other 892 remotes. However, if the 892 was originally learned directly into a receiver then it cannot be used to teach other 892 remotes. Sorry, it's a little confusing.
My garage door is a commercial-type and I don't see any dip switches. Is there another type of remote that can learn from my older 892LT? @@randygatekeeper4297
Hi, Thanks for the video. Could you please advise how to duplicate Linear ACT-34B 4-Channel Block Coded Key Ring Transmitter to the new car remote from this video? I bought it and already synchronized it with the garage door but cannot do with the gate remote which is Linear ACT-34B 4-Channel Block Coded Key Ring Transmitter. Thanks
+John Woo-Sam My understanding is the only way it can learn from a 972LM remote, if if that 972LM remote was originally programmed from a 61LM remote. If the 972Lm was programmed from another 972LM or directly to the receiver then you will not be able to learn it into the 892LT. If you have one that was originally programmed with a 61LM then it would program the remote the same way we show in the video.
This is the best video on how to program the 892LT remote. Wish I found this before the 10 other videos.
Thank you brother! Took me not even 30seconds to get it programmed.
so how does the remote learn how to close the door? I got it to learn how to open but that's it
Great video. Wasted 1 hour until I found your video. Thanks so mcuh
Great video, easy to follow. thank you so much!
can you program one 892LT with another ? we have two cars which need the remote
Thanks for the instruction, I've used on my Liftmaster 894LT it has 4 buttons.
The GateHouse how does this remote learn from the 972LM?
Thanks really i just spend like 30 mins trying to figure out how to program my controller and then i just watch your video less than one minute really really thanks
How can the Liftmaster 892L be programmed for the DoorKing 6003 gate opener? Is there a learn switch on the Doorking control panel? My current Liftmaster 892L has two buttons to open the garage and the gate. I needed another remote, and can only get the garage door to program. I could not program the new Liftmaster 892L for the gate by using the old/current 892L remote.
You will have to locate the Liftmaster receiver unit in your Doorking operator. That receiver will have a learn button inside.
I lost one of my 892LT remotes. Can a new one learn the code from my old 892LT?
If you have an 892lt that was originally set up from a dip switch remote then yes you can use the 892 to teach other 892 remotes. However, if the 892 was originally learned directly into a receiver then it cannot be used to teach other 892 remotes.
Sorry, it's a little confusing.
My garage door is a commercial-type and I don't see any dip switches. Is there another type of remote that can learn from my older 892LT? @@randygatekeeper4297
I know it can copy from the 61LM, but can it learn a 61LM code from a 972LM?
Hi, Thanks for the video.
Could you please advise how to duplicate Linear ACT-34B 4-Channel Block Coded Key Ring Transmitter to the new car remote from this video? I bought it and already synchronized it with the garage door but cannot do with the gate remote which is Linear ACT-34B 4-Channel Block Coded Key Ring Transmitter. Thanks
Hello, Sorry the 892LT is NOT compatible with the Linear remotes.
Many thankls!
Thanks for Video. Easy Peasy!
Can an 892LT be programmed off another 892LT? Need it to open the gate at my housing complex
It can IF the original 892LT was set up with a dip switch master remote.
If it was learned from another 892 then probably not.
Does the liftmaster 892LT learn from a listmaster 893MAX?
No it does not.
My garage door opener is a Sears Craftsman I'm using the LiftMaster 892lt remote following instructions to a T can get this darn thing to work
Thank you. Short and to the point. Stupid instructions that came w/ remote were no help. Would give two thumbs-up if I could.
thanks. this should be the actual instruction that come with the remote.
Thank you, it worked like a charm!
how can the 892LT learn a code from a 972LM. Can you provide instructions
+John Woo-Sam My understanding is the only way it can learn from a 972LM remote, if if that 972LM remote was originally programmed from a 61LM remote. If the 972Lm was programmed from another 972LM or directly to the receiver then you will not be able to learn it into the 892LT. If you have one that was originally programmed with a 61LM then it would program the remote the same way we show in the video.
Very helpful! Thanks.
legend thanks
Thank you really helpfull video.
Thank you very much, somehow I followed paper instruction, it doesn’t work.
Liftmaster 892LT programming
Yes the 892LT can learn a code from a 972LM.
The GateHouse Thank you
Fixed mine. Thanks