I'm a finish Carpenter and have been for many years. I have never seen a door frame constructed in this manner. Had I have ever thought of it I would have done it this way. It's too late now I'm retired.
In the 70-80’s when I was a carpenter we did do the same but not with fineer but the facial with masive oak, beach or other hard wood. Saves wood, strong and super straight.
Beutiful bit of carpentry so much skill and the finishing is perfect great to watch the time you take to perfect all your projects from start to finish❤
Шикарный результат! 👍 Вода всегда прекрасно работает на сгибах и даже на прямых углах, что с контактником, что с ПВА. Спасибо за ролик! И подачу материала!
Impressive as always. You have a different way of looking at things. I would strongly recommend you buy yourself a 6 foot level, instead of using the little 2 foot one, for installing your door jambs.
Excelente trabajo! Felicitaciones! La forma de desarrollar los marcos, de tal forma que queden los anclajes ocultos es muy buena. Gracias por compartirlo. Un abrazo! Germán, Lomas de Solymar, Uruguay.
I was doing something similar for kids play house. After watching how you did it I feel stupid as I managed to complicate my work much more than it had to be.
Very beautiful door frames! I love your attention to detail in every project. I have a question: why do you cut narrow strips from wide boards and then glue them back together? Does it have something to do with the fact that wood expands and contracts?
Impressive to say the least. I would have enjoyed it even more if you’d have added a few comments. Unlike others (apparently) I didn’t follow every step.
Дякую, за як завжди чудову роботу. Хотів лише сказати, що в Німеччині дверні коробки встановлюють на монтажну піну. І тримається міцьно і повитря під коробкою не гуляє. Це має значення, тому що ви хочете ущільнювати двері!
Mooi maar hier krijg je spijt van, langshout fineren gaat altijd fout je moet altijd haaks op de draad fineren, dus eerst haaks fineren daarna je toplaag langs. Denk hoe multiplex is opgebouwd
Здравствуйте прикольно получилось. Я немного не понял, она часть крепится к стене дюбелями без использования пены монтажной . А как крепится вторая часть которая встаёт в паз ?
That’s the coolest door frame iv ever seen , a lot of work but I think it’s worth it.
Beautiful! There must be a hundred different skills on display in just this video
Beautiful job on the door frames. Nice to see the new home is coming along nicely.
I'm a finish Carpenter and have been for many years. I have never seen a door frame constructed in this manner. Had I have ever thought of it I would have done it this way. It's too late now I'm retired.
In the 70-80’s when I was a carpenter we did do the same but not with fineer but the facial with masive oak, beach or other hard wood. Saves wood, strong and super straight.
Beutiful bit of carpentry so much skill and the finishing is perfect great to watch the time you take to perfect all your projects from start to finish❤
Светлая голова и золотые руки творят чудеса! Всегда с огромным удовольствием смотрю за процессом и восхищаюсь результатом!
very clever. Has just solved a considerable problem for me!
One of the best door frame builds I’ve seen.
Greetings from South Africa 🇿🇦. Absolutely stunning work carried out. The final product installed is amazing. We'll done 👌
I am very impressed with your work .Thanks for sharing this video with us
Another awesome video! This is my 1st time seeing a door frame like this, genius, beautiful and amazing skill!
Thanks
What a craftsman you are out standing
Шикарный результат! 👍 Вода всегда прекрасно работает на сгибах и даже на прямых углах, что с контактником, что с ПВА.
Спасибо за ролик! И подачу материала!
Amazing, Gregory! Fantastic work!!! 😃
Stay safe there with your family! 🖖😊
Hello Master.
I love your great work!
And I love your great videography and video editing. Tachi from Japan
Thank you 👍
Great piece of work! I always learn something new from you. Thanks
Impressive as always. You have a different way of looking at things.
I would strongly recommend you buy yourself a 6 foot level, instead of using the little 2 foot one, for installing your door jambs.
Amazing mind you have
the absolute definition of a "proper job"... great end result.. didn't know you could bend veneer round corners like that! impressive
4:18 This is a pretty brilliant way to set blade height. Nicely done!
Absolutely beautiful. Thanks for sharing.
Gregory, you are a genius.
Thanks
Looks awesome 👍🏿
Super nice! Well done.
You the man. Beautiful work, right down to the smallest detail.
Nice job, looks great.
Excelente trabajo! Felicitaciones! La forma de desarrollar los marcos, de tal forma que queden los anclajes ocultos es muy buena. Gracias por compartirlo. Un abrazo!
Germán, Lomas de Solymar, Uruguay.
Beautiful work. Not something I would ever attempt, but I enjoyed watching. Thanks for sharing!
Beautiful!!!
Muy buen trabajo felicitaciones 👏👏👏👏👏
Saludos desde Uruguay 🇺🇾
was für ein professioneller Job!
an architectural work a luxury
It was sensational, congratulations friend 😊
That is an absolutely outstanding job.
The doorframe looks amazing. 🤙🏼🙂🤙🏼❤️
Damm this guy is good. Very nice frames.
Good Job 👍👍
professional , good job.
Great work
i enjoy watching your video that you very much you are doing great work.
That's pretty neat!
I learned a lot. Thank you.
Beautiful
Bardzo ładnie wykonane.
Good Job!
I was doing something similar for kids play house. After watching how you did it I feel stupid as I managed to complicate my work much more than it had to be.
i.e. awesome work! great ideas and skill!
Really accurate!
Piękna robota 👍
Отличная идея и исполнение!
Thank you for your video, this is very helpful
Lot of work but man is it nice
J aime le travail bien fait c est top
Good job 👍💪
Je suis admiratif de ce très beau travail, soigné et efficient, merci de nous en faire profiter.
Thanks my friend
Masterpiece
Super 👍
Belle réalisation
Very beautiful door frames! I love your attention to detail in every project.
I have a question: why do you cut narrow strips from wide boards and then glue them back together? Does it have something to do with the fact that wood expands and contracts?
It's because of veneer comes from factory with not straight edges as usual and I had to fix that before gluing. Thanks
@@GRINwood він питав про сосну скоріше )
nice build. thank you.
Perfect work. Congratulation! Did the case halves get glue? Also show how the door leaves are connected with hinges.
Really surprised on how the fineer bend on that thight curve. Nice technique
They're beautiful, but a whole lot different than we in the US build frames. - Chris
Excelente trabajo
Оригинально. Технологично. Просто. Доступно. Круто!
Спасибо
Я в захваті! Справжній майстер. В кожному відео є якісь цікаві ідеї та методи виконання.
Дякую
Як завжди гарна робота
Отличная идея
That is called a split jamb. I’ve never used one, only tried to remove one and it was very difficult!
просто гениально,превосходно,дерево обклеить шпоном из дерева
Так дешевле.
What are you using with brush in order to bent veneer ? Water?
Great work. Thank you.
@@NikosEliopoulosmain it's water, thanks
@@GRINwood Thank you.
🙌👏👌👍👊🙌
Willy from Belgium.
Привіт, радий тебе бачити і твої відео
Дякую, що продовжуєте дивитись 👍
@@GRINwood і буду,а ти радуй відео, якраз дивлюся та навчаюсь.
Классно вышло👍
Sensacional!
Tip Top 💪👍
buenisimo!!!
pengolahan kayu yang sangat bagus
I saw it... 😳 You must have been pretty angry when that happened. But I missed the part where you made your own veneer. 😄
Very Very good joob
Che tipo di colla hai adoperato?
Grazie e complimenti ❤
Класс!!! Не понял одного. Как крепиться ответная часть коробки?
👍👍👍👍👍
Impressive to say the least. I would have enjoyed it even more if you’d have added a few comments. Unlike others (apparently) I didn’t follow every step.
Alhamdulillah Masha Allah ya Sanya albarka a cikin rayuwar mu Dan matsayin annabi Muhammadu s w a
That it has to be good and excellent furniture
Дякую, за як завжди чудову роботу. Хотів лише сказати, що в Німеччині дверні коробки встановлюють на монтажну піну. І тримається міцьно і повитря під коробкою не гуляє. Це має значення, тому що ви хочете ущільнювати двері!
Bacana de mais, mostra colocando a porta tambem
Я би сказав не просто добра, а досконала робота!
Гарне відео. Підскажіть будь ласка, який клей використовуєте для виготовлення щитів?
what holds the second part of the split jamb in place?
Πολύ καλός τεχνίτης άρτια τεχνική μπράβο από έναν ξυλουργό 74 χρονών,60 χρόνια σε αυτή την τέχνη. 20:39
Mooi maar hier krijg je spijt van, langshout fineren gaat altijd fout je moet altijd haaks op de draad fineren, dus eerst haaks fineren daarna je toplaag langs. Denk hoe multiplex is opgebouwd
Оригинальный способ и3готовления наличников, во3ьму на 3аметку👍
👍
Should be carefull with gluing veneer over massive wood, those veneers are probably going to crack when the wood will expand.
Дуже круте рішення! Але як пропінити для кращої фіксації і шумоізоляції?
@@БогданДубровський-д6ц дивіться наступне відео, там в кінці є про це
@GRINwood дякую)
превосходно
Який диск стоїть на торцовці,? Нещодавно придбав схожу, оригінальний диск рве матеріал, навіть з малярною стрічкою
Диск той що в комплекті йшов, метабовський. Спробуйте пиляти повільно і заточіть диск, гострі зуби менше виривають матеріал
😃😃😃
ممتاز
Идеально
Здравствуйте прикольно получилось. Я немного не понял, она часть крепится к стене дюбелями без использования пены монтажной . А как крепится вторая часть которая встаёт в паз ?
Обе части будут дополнительно укреплены монтажной пеной, но уже после установки дверного полотна. Об этом в следующем видео. Спасибо
Хорошая робота!Какая у вас модель фуганка?
Warrior 200мм
Warrior 200мм