Makita 40 Volt: The Track Saw With Only One Battery
ฝัง
- เผยแพร่เมื่อ 20 ต.ค. 2021
- Head to www.squarespace.com/scottbrow... to save 10% off your first purchase of a website or domain.
Makita Track Saw (Why Every Builder Needs One) • Makita Track Saw (Why ...
Makita track saw or festool track saw? • Cordless Track Saw: Ma...
MUSIC by Gurtybeats / gurtybeats
BUY SBC MERCH HERE
sbc-store.creator-spring.com/
You can support SBC on Patreon - www.patreon.com/user?u=16545763
Donate here if you would like to help the channel - www.paypal.com/cgi-bin/webscr...
I'm on Instagram too scottbrownc...
The below are affiliate links. I get a small percentage when you buy using these links. It does not cost you anything extra, but helps supports the channel. Thanks!
My Work Wear
Work Pants euroworkweardirect.com.au/col...
Vest euroworkweardirect.com.au/pro...
Kneepads euroworkweardirect.com.au/col...
Belt euroworkweardirect.com.au/col...
My Tools
Tool belt amzn.to/3dXMZnk
Tool belt shoulder straps amzn.to/3AI0VLU
Hammer with wooden handle amzn.to/3jRhQ92
Rubber grip for hammer amzn.to/3jTM7UE
Speed Square amzn.to/3yAaE5f
Makita Circular Saw amzn.to/3qYzaKH
Track Saw amzn.to/3dV9wkF
Awesome ratchet clamp amzn.to/3dSGa6s
Impact driver (main drill) amzn.to/3xDmBat
Other drill for pilot holes amzn.to/3yAYjh4
My Table Saw amzn.to/2UzuOxp
My favourite vacuum (newer version) amzn.to/3yxss0S
Full face mask amzn.to/3hH4Cce
Ear muffs amzn.to/3yNAWBl
Green line laser level amzn.to/3yqYdJ0
The Camera Gear I use
Main Camera amzn.to/3AD2if5
Backup Camera amzn.to/3jTGTbv
Main Lens (main camera) amzn.to/3wp0hzU
Lens for Backup Camera amzn.to/3jWaFfU
Microphone amzn.to/36pNWAA
Tripod amzn.to/3yxSeCb
Headphones amzn.to/3xqm2R4
Drone amzn.to/3xp9OrO
Aeropress (Coffee) amzn.to/3ijpvdQ
SEND STUFF HERE
PO BOX 3506
Richmond 7050
New Zealand
Disclaimer:
These videos are intended to provide information and inspiration only. If you choose to imitate, duplicate or copy anything you may have observed in these videos, you do so at your own risk. Scott Brown Carpentry Ltd does not take any responsibility for any action taken as a result of the information or advice on this TH-cam channel and shall not have any liability in respect of any injury or damage that may result.
To view full disclaimer, click here: www.scottbrowncarpentry.com/d... - แนวปฏิบัติและการใช้ชีวิต
![[4K] TREASURE(트레저) “KING KONG” Band LIVE Concert 킹콩은 라이브를 찢어🦍 [it’s KPOP LIVE 잇츠라이브]](http://i.ytimg.com/vi/p8bLLOxPDD8/mqdefault.jpg)
A little over a year ago I didn’t own an an impact. Right now I’m remodeling my sister in laws place. I’m on all platforms. Big change in life, from sitting down on a desk to tearing down walls. I blame it on you Scott 😅. At least some people think I’m happier now. Keep the videos coming.
well said
So I shared your channel with a dude I work with, today he told me “the guy from New York has a new video out” I knew right away he was talking about you. He was born in Peru, grew up in Mexico and lives in America (Texas) now. So those are the only places on earth, so when I told him New Zealand his mid goes to New York. He is a great guy, just not to good in geography. 😊
Bluetooth system on chip modules like the Nordic NRF52840 are priced at around $3.50 in bulk. There's no way they should be charging $100 extra for a pluggable bluetooth add-on to a $350 tool. IMHO they should either integrate it into the tool or sell the add-on for like $15.
Having to buy the aws chips stopped me from buying into the system. Already spoken to other tradies who have damaged or lost the chips so that was a deal breaker for me
.
@@WhangaFish Oh yeah, I didn't even think about losing them. Users need to push back on Makita and get them integrated into the tools.
Kickback on a track saw happens when you're plunging into the timber surface rather than plunging to full depth and then proceeding to make the cut. A riving knife won't stop this, only will aid when cutting thicker timbers that have a tendency to bind on the back of the blade. A longer track like the 1.9m track makita makes gives you a bit more free track either side of a 1.2m sheet for this purpose.
Thanks! Makes sense. I have been using the corded for going on six years (on and off, I'm not a carpenter) and never had a problem. Thinking about going cordless, viewing this vid, and got a bit scared of my old saw.... :)
I have owned the corded and 18v versions for years. Once you get cordless it is very hard to go back to the corded saw. One less cord to manage makes it much easier to work with. As for the kickback. I have had 3 occasions of that same kickback. The kickback where the blade rides back over the track (like how your kickback was) is caused by the blade not being parallel to the track when you ran the blade. The front of the saw was angled slightly outward causing the back of the blade to catch onto the aluminum track. If you have any slack with the saw on the track AND you push it slightly off, bit into the track. There are 2 knobs on the saw that control the round wedges to remove any slack while on the track. The round wedges on my cordless saw are worn down so I work around it. For precise cuts, I have my right hand to run the saw and my left hand on the guide plate to help parallel. I try to be on the left side of the track, instead of being directly behind the saw on the right side. One major mistake I made was using a really thin diablo blade with this saw. I change the blade because I didn't want to gum up my Makita blade cutting down 4x8 plexiglass. This blade was too thin for a plunge saw and deflected. It cut into the base place a little and trimmed the aluminum on the track as well. I will try contacting Makita USA to see if I can get replacement wedges for the base plate.
I should also note that the blade on my corded saw is thicker than the one on my cordless. I note this because my corded saw will trim off more of the splinter guards on my tracks, so if you switch back to cordless the splinter guard will not be accurate. Since your not keeping your corded saw, it will not matter as much.
This is one of the things I love about battery powered tools in general. In particular, circular saw when doing plunge cuts, say into some sub floor. Even if you get a bit of kick back, its extremely easy to control if youre holding onto it properly, as the batteries don't have the same amount of potential push as a receptacle does.
While it isnt as big as going from one to none, going from two to one is still awesome
I work at a company that does tool repairs in NZ. The team loves to work on Makita stuff because their parts and diagrams are top notch. Their post sales support in NZ is quite commendable.
Working in tool repair, aside from the simplicity of working on makita tools, which brand would you recommend, as far as reliability? Which brands do you see most often and least often? Im in the US so its pretty much milwaukee, makita, dewalt, metabo. My bro and i are both in ridigid/aeg platform but switching. I have a couple m12 tools but thats for my automotive use. We are have pretty much narrowed down to makita or metabo/metabo hpt.
One of my biggest reasons for makita was because of the ability to repair the tool. Most of us know the most common failure in power tools is the trigger. Makita tools have a separate trigger which makes it far cheaper to repair than most brands since most brands the trigger is an assembly/wired to the brain of the tools making it far more costly to repair since now you're not replacing just the trigger. Which the cost of replacing a trigger assembly ($100-150) thats not makita, you're almost better off buying a new tool since the cost for a new tool isnt much more than replacing the trigger assembly, well for drills and impacts/tools that arent $300+. Where as makita you can replace just the trigger for $20-30.
@@jacksmith2315 Oddly enough we see quite a few Dewault table saws, not sure if it’s just because they’re so popular or if it’s the design but we see a lot with motor issues, could be people just pushing them too hard. Our company mostly services industrial construction rather than builders. So their equipment tends to wear pretty quick. We don’t see too much from the cheap brands just due to cost of repair vs buying new, people always want an excuse to buy a new better one. Personally I quite like Bosch, their parts and diagrams are easy to find and buy so pretty good for self repair. Their standard of quality is quite good too
Another great review Scott, I own the 36v makita track saw and love it, appreciate the reviews as we don’t have stores in uk where we can try out tools before purchasing them so watching videos to get an idea of what there like is the only way. Love ur channel keep up the good work 👍🏻
Thanks to your previous reviews of the makita track saw i bought my first 36 volt and i love it thanks scott for such a great review now i want the 40 volt (in time) awesome video as usual!!!!!!!!!!!!!!!!
That's a nice objective review Scott, makes a refreshing change from lots of paid promotions we see on other channels.
Ive been running my 36volt cordless Makita track saw with a dewalt chop saw bag and taped the blade change hole and it does amazing on the dust to my surprise.
Hi Scott I had the same problem with dust on my track saw. Try covering the blade change hole with tape . It makes a massive difference as that's alot of open space for the hoover to combat . It make the extraction focus more on the blade exit where the dust is.
I'm not in the market for a track saw. However I am on the 18v Makita system and still watched the whole video. Great review
Great review Scott. Totally get your point about the wisdom of getting cordless vs corded, if in most cases you have power on site and the potential hassle of having to juggle multiple batteries between being on charge or not. I recently got the TS55 as I couldn’t justify getting the cordless version given the need to have multiple batteries, plus seemed a bit pointless given I always use it with the vacuum.
Loving the new cabinet videos as well! Cheers.
How we're talking about battery tools nowadays is also a tell tale sign of how much has changed within the last 3 years.
We're no longer concerned about these being underpowered. And that's been my experience with the 36v version. Just recently I had to cut a composite worktop that was super dense and the saw never even blinked once.
Just sold my corded festool yesterday and never needed it ever since i got the Makita 3 months ago.
Greets from Edinburgh Scott!
I have a 2x18v makita track saw. I really liked the cordless when doing my decks, I left all the deck boards long then one cut down the ends to get them all perfectly even before putting the picture frame boards on. I've also really grown to like the cordless in the shed to avoid the clutter.
Love your channel, custom cabinets without a cabinet shop is painstakingly hard, or can be depending on variables. Track saw for the win. Love the channel. New zealand is beautiful id love to come there and frame.
Regarding the lowered rpm. The 40v got 1400rpm lower then the 2x18v model, but the 40v one does have the same constant speed control as the new Makita 40v angle grinders, which basically means you won’t have a drop in your rpm when plunging into hardwood, such as oak.
Great video. Cheers!
Thanks for the great review Scott! Regarding the blue tooth dust extractor chips - TOTALLY hear you that it's super expensive. I've been buying the Festool blue tooth 'bugs' for ~$50USD and attaching them to all the non-Festool cordless tools that I want dust extraction on. My setup then effectively becomes corded, but I still like the convenience of having cordless options for all my tools if I'm building in a space that doesn't need dust collection.
I bought a 36v version and use it for everything. Love it
Just wanted to say I love the videos Scott. I've never really built anything and I'm not a carpenter and don't plan on becoming one but dang these videos are just so interesting. Keep up the great work!
its never too late to become a carpenter!
Always like your tool revue videos Scott,very honest. Thank you for the video.👍👍
I ended up going with Dewalt's Flexvolt track saw since im already on DeWalt's platform. It's not as feature rich as Makita, but still does a great job and takes only 1 battery.
Hello Mr Brown ( - : i applaud the fact that you chose to give your current track saw to one of your (workers/mates ?) and in a way paying it forward as your new one was a gift....if i were Makita i would have been happy your honest review.
I'm a bosch guy thru and thru, but i love my 36v makita tracksaw, its so sinple intuitive and just a joy to use, bosch came out with an 18v one, but I cant justify jumping oj it, yet, my makita works just great and I'm already used to it.
Hey Scott....... enjoying all your content all the way round the world in Ireland 🇮🇪....... keep up the good work.
Hi Scott... I look forward each week for the next exciting video.. I like you way of doing an honest review.. based on the everyday practical use of the tool and what features “float your boat” and what do not / annoy you.
That 40volt track saw is nice, but a bit above my price range for the sort of DIY stuff I do.. I started out on the cordless path with a deWalt drill that was given to me, then I went down the Ryobi one plus route which suited my requirements... but I have recently go Makita because I was able to purchase for $60.00 a very large plastic bin full of Makita cordless tools that a local kitchen cabinet place were disposing of.. 12v and 18v stuff.. a few a bit dead, but many impact drivers, drills, a planer,.. So am now a deWalt, one plus & Makita shop, and I have a misc selection of batteries and chargers to prove it!.. I need to develop a system to keep track of the batteries that need a charge or appear to be on their way out.. perhaps a bright red plastic bin to put them in, then at the end of each workshop session load up the chargers...
Keep up the good work.. cheers
After using a corded festool drop saw for about 15 years ( yes it was time to get a new one... ) I got the Makita 40 volt dropsaw. Its really good, very precise.
My son lived in mount eden but now lives in near Christchurch we lived in levin now live in Australia good show thank you
You need a sleeve on your vacuum hose. Specialy now your cordless, I just put one on mine, and now I don't have any snagging on corners or on the end of the track. it is so nice.
I had a kickback when I first got my Makita and wacked the track like you did.. I now use the little tab for holding it down during an angle cut.. figure it might help hold the saw down if i ever have another kickback
Like your honesty and integrity Scott...................
Great saw especially th-cam.com/users/postUgkxxnKxcY0vm4xjW8xkPbjaHuKt10gr-wG_ considering how drastically cheaper it is than every other track saw on the market. Only things I would mention is replace the blade immediately, the 24 tooth blade supplied leaves a lot to be desired.
I have many Makita tools but not the tracksaw. I have festool and had the corded and after trying the cordless I decided to get it ( strange as it's the only batt tool I have that seems to have more power then corded) not sure on Makita bag but I find I use the tracksaw with bag n not dust extraction ( hoover) in tight areas or smaller jobs which makes it even more versatile than the corded version. Love tracksaws as started off with cheap titan one many years ago and never looked back but once you go cordless (especially if you work on properties when sometimes the power is temporarily off) the tracksaw was only tool I had to wait for power again but no more 😍
Hey Scott,
I recently purchased a metabo bluetooth remote starter for use with all my cordless tools and any AC powered vac. Simply plug in the receiver between the wall socket and the vacuum and I attach the switch around the vacuum hose near the tool. Every time you start the tool the vibration from the tool signals the receiver to start the vacuum, it works with any brand of tool both cordless and corded, and any vacuum, Look it up, it sells for about $200 in Oz. Great product
I use it for ~6 months, it's really reliable and I'm really pleased with it. The System worked with every Tool so far. As a benefit you have the remote control/sensor on the end of the hose, so after you finished a cut you can switch the vac on and clean your work area.
Stefano. You are the man! Never would’ve found this. Thanks. Looks awesome
@@mst5517 У меня уже много лет есть проводная и 18-вольтовая версии. Как только вы перейдете на беспроводную пилу, очень трудно вернуться к сетевой пиле. На один шнур меньше, что значительно упрощает работу. Что касается отката. У меня было 3 случая такой же отдачи. Отдача, когда лезвие едет назад по гусенице (как и ваша отдача), вызвана тем, что лезвие не было параллельно гусенице, когда вы двигали лезвием. Передняя часть пилы была немного наклонена наружу, из-за чего задняя часть диска зацепилась за алюминиевую направляющую. Если у вас есть провисание пилы на гусенице И вы слегка толкаете ее, вгрызайтесь в гусеницу.
Try the 40V track saw with a Makita dust bag. Obviously it is a bit more dusty but it really gives you the full advancement of a battery saw. I use the bag when i’m working in the clients garden or drive way.
Love your honest reviews!
Mate thanks for that video. I hate tool review videos in general (unless they're AvE's). But that answered so many questions I had about this saw and the dust extraction as a system. The fact we pay an extra hundy for the chip is ludicrous to me. It was good to hear some thoughts about a tool AFTER it's use in the real world. No stupid torture test or running it flat out till the battery dies. Just on site use doin a job... so much more helpful bro, cheers.
That is because AvE’s reviews are as Scookum as Frig
I have used my 36V Makita track saw to square a dimensional framing post since I could not fit the post on my table saw. I use it for anything that a square cut is important.
I bought the corded Bosch track saw, which is based on mafell, I'm more than happy with it, I also bought the Bosch 18v circular saw, which they made to fit the Bosch and festool tracks, I think the corded one fits festool tracks too.
I do like the Bluetooth function on the makita, they should include it with the tool though, for the price they charge.
Great video mate. Interestingly, here in the UK a single 40v, 5ah battery costs £149.99 and two 18v, 5ah batteries cost £134.50 so the two battery thing may not be such a big issue over here.
I run a corded track saw and I'm really considering going battery, mostly because I find it really easy to get the cord snagged on the end of the track. That causes the saw to stop suddenly mid-cut, often wrecking the work and potentially wrecking the track. I now purposely set the cord out of the way before starting, but this is after learning the hard way. It is just one more step to forget. The vac hose isn't as much an issue because of its large diameter.
a good honest review Scott. Any wonder Makita does support you. Great
I have the 18volt track saw. Love it.
Your work is great and helpful
great review Scott as you know i like the other brand that wasn't mentioned lol i did have the corded Makita as my first tracksaw and i will admit it was pretty good i really did like the scoring function and like you have experienced the kick back which was a bit scary the flexvolt dewalt runs on 1 battery and has the riving knife but hey at the end of the day you buy the tool that is going to do the job regardless of the brand
Same with the festool ones, corded just got more power and grit, but the battery ones are nice when you don't need full on monster power
i got a lot of respect for you giving an honest opinion of the tools and not just saying there great because they've been given to you. each yr a new model comes out, the price goes up and the quality seems to go down.. they should't even mention the blu tooth feature if they don't include it within the tool
A small tip for scoring laminate. When i do it with my cordless 36V makita Tracksaw, i pull it backwards while scoring. It tends to give a more clean score. 👍
Love my bosch cordless track saw
Awesome real world review! Keep the videos coming!
Good review Scott. I recently changed from the festool ts75 first gen 110v to the metabo cordless plunge/track Saw. Same idea as Makita singular battery run. Reason I went metabo was the cut depth can still cut 54mm doors(fire doors and front external doors easily) its strong enough to go through all types of materials I've cut. 50mm oak is the only timber I've to go through twice. Which to be fair even the ts75 struggled with.
Very Interesting SBC as always! 😎👍
Thanks for the good, honest review. Nice saw. But I already have the corded version, no need to change…………yet.
I have the Makita ( Corded) track saw, my partner has the one your reviewing, his is more convenient, mine has steady consistent power, he's always using mine because we cut a lot of Oak and other hardwoods, corded is the only way to go.
Had mine for a few weeks now, very happy with mine…. Festol still have same bevel drive motor which is why the have the the wedge, if they jam they shear the motor… pull it apart and have a look ask me how I know..
Great review mate
Cordless is the only way to go, I like a super clean work area and cords being gone is a welcome addition. My whole set up is cordless. At this point the cordless performance is spot on. And for the blue tooth vacuum I got the module for my Festool CT26 so the switch is right on the end of the hose to me this is about the best solution for all the different brands we use. Brand loyalty is ok but it's nice to pick the tools you want without being stuck with a certain brand.
Scott, you could just get the blue tooth device for the festool dust extractor with the remote control on the hose or pin it to your shirt or belt.
Great review Scott, should do a follow up in say 3-6 months to let us know how it's still going, and how you're finding battery life etc etc
You should take a look at the Metabo tools. The Vacuum is dual battery, but has an autostart that works with any tool, because its triggered by vibration. The track saw is 18v and only one battery but somehow cuts like a champ. The dust extraction on the tracksaw is also really good. Metabo is slowly replacing my Makita tools...
Valeu Scott quase se machucou com a serra cuidado 👏
300k coming your way!
cracking show i just so admire your honest views ,,, thinking of purchasing a track saw now ,,,,
I have the 18x2 (36v) and have loved it. This looks more like putting a new housing for the single 40v battery.
I have experienced the “active kickback sensing” or whatever they call it. It does work and quickly cuts off and stops the blade. I’ve never experienced anything like you’ve shown with your corded saw. This makes the battery saws much safer in my opinion.
As for battery life I’ve never tested it but with two 5amp 18v batteries the 36v will go a solid day of building cabinets which seems on par with your 40v 4amp battery.
I’m happy with my 18v Makitas and make furniture so I don’t have a compelling reason to go 40v.
Another good video Scott!
Yup, I only have 3 amp batteries which makes me think I should consider upgrading as they don't last quite long enough.
Having said that, battery powered is way better. Even if connected to a vacuum it's one cord less to get tangled up in the material.
Also, safety like you mentioned.
My last job was in a shop cellar and it was impossible to carry materials down as it was too narrow. I just grabbed my saw in one hand, went upstairs to break down the sheets and went back down again.
Setting up extensions may not sound like a big job ones per day but doing it multiple times is quite daunting. And you just can't leave them laying about with customers around.
Like your vids Scott and know many people that do too! Have a great weekend!
I have also 18V makitas BUY the 40V nailer is SO superior than 18V that I had to get a 40V platform to be able to retire my compressor. Some 40V tools ate superior, nailer and angle grinder fpr example, other ones appears to be on pair with 18V x 2 platform.
😂 There's a couple of scrapes in my tracks from the Makita kicking back 😂 I use a dust bag on the saw, that works ok provided i remember to empty it regularly
I have the corded one and love it. Congrats on getting a free one! How did you establish a relationship with them? That's one of my channel goals!
love the silent bits in ur vids
and the bro science 🧪 😂
I wanted the makita but I choose festool for the dust collection. On my jobsites it is vital and necessary.
The main reason I went for corded (apart from price) was that if the hose gets in the way, might as well tape the lead to it. Plus the advantage of using a pto on a mains extractor, and is a lot cheaper than buying blue tooth.
I have the Festool and as good as dust collection is I out a piece of tape over the opening on the side and it worked great. Then people starting creating covers you could clip in and take off to cover that opening. Might want to tape of your and see what happens.
Hey Scott, that explains the kick back lol,
I was using the corded track saw for full month of cutting laminated sheets, I recall does twice kick back, freaks me out!
But I like the square sharp edge, especially if apply pvc clashing on the edge on the panel after cutting. It’s a better cut then table saw, similar quality to a Beam saw.
У меня уже много лет есть проводная и 18-вольтовая версии. Как только вы перейдете на беспроводную пилу, очень трудно вернуться к сетевой пиле. На один шнур меньше, что значительно упрощает работу. Что касается отката. У меня было 3 случая такой же отдачи. Отдача, когда лезвие едет назад по гусенице (как и ваша отдача), вызвана тем, что лезвие не было параллельно гусенице, когда вы двигали лезвием. Передняя часть пилы была немного наклонена наружу, из-за чего задняя часть диска зацепилась за алюминиевую направляющую. Если у вас есть провисание пилы на гусенице И вы слегка толкаете ее, вгрызайтесь в гусеницу.
I've experienced kickback that almost spilled my guts (with the AC powered Makita Tracksaw), so a riving knife would have been a useful addition.
I love my corded makita track saw. I have built a shed, 2 planters. My only fault is I can’t get a perfectly square cut and that more a fault of my inexperience. My thinking is I use a plug in vac so might as well buy the corded
Nice honnest review!
Hi- It was about time those guys give you something. You should be a Makita ambassador if there is such thing.
Great video, made a lot of sense 👍
Hi Scott love the videos, I had the same trouble with my makita and I found that when i had more track under the saw before it starts the cut I solved the problem and have not had a problem since.
Hope this helps 🙏 welshmen in crete greece
That just happened to me the other day and got the same result on my track. Was I annoyed! Sad for you but glad it can happen to a professional so I don't feel so incompetent.
Great review 👍
I have the 36v love it
You need more batteries mate
I have 12 18v batteries and have dedicated pairs for my vacuum and tracksaw
Works great
Scott, great video. I noticed you've used alot of old clips of other Makita tools and its made me think about how you store and file all your video clips whilst editing. Id love to know how you organise it all, (even and editing spesific video). Im imagining a folder full of titled clips about each tool???????
I'm really in the market for a track saw, primary use case is breaking down sheet goods .. MDF for use in my cnc laser 2'x4' bed, as my boys continue to age going to have less opportunity to engage them to assist with muscling 4x8 sheets. I am heavily invested in the Milwaukee 18v/12v platforms. Been leaning towards picking up the Makita, but been undecided whether to pick up the existing 36v or continue to wait for the 40v availability. I am hobbyist, not a daily user.
3 things: The active feedback works well when you are going through deeper stock. You will notice mostly kickback happens at start when you are plunging, you are plunging at a taper angle (two knobs need to be calibrated, tighten and then release back a bit for glide). Another big point. Many makitas arrive with a very loose blade out of the box, sounds like the blade is supposed to spin on the harbor for safety. Mine was so loose that there was enough kerf loose to eat up the tracks lip, out of the box, the saw was vibrating, I checked and the blade was way loose and so not flat parallel to the tracks.
Thanks! I'll check that when mine arrives today.
I got the corded one 2 months ago and love it. I did get it to kick back once by plunging before the blade got up to speed. I think that’s what happened to you with the kickback when scoring.
So the blade dug in rather that cut? That would make sense
April 2022 bought this unit with charger,1400mm rail and 2 batteries $1299. Worth every cent after 1 day of use.
Luuuuucckkkkyyyyyyy!!!!!!!! Cheers from Northern California.
I have the old Makita track saw but the 18volt 2 battery model. I love it but I am not a carpenter so it isn't getting nearly as much fulltime use as Scott is giving it. I never have a problem with battery life , but that is more due to my type of use as opposed to the setup.
To cut down on your dust try looking for a Blade change 'opening' cover it clips into the 'hole' where you access the blade change, keeps the dust more in the machine give the extractor more of a chance to catch it I have one for the Festool saves a lot of dust
Just use a piece of tape
I bought the dual 18V cordless track saw because of this channel and I've loved it. My only issue has been when cutting thick lumber (1"+) that the blade doesn't cut square and tends to wander a little. The blade is so thin (.057") that it has a lot of flex in it so countertops and doors are an issue. The Festool appears to have a rear guide that keeps it square, but it may be operator error. Maybe I'm supposed to use multiple cuts.
I’ve used that saw quite a bit on oak worktops, you need to cut in 3 or 4 passes to keep it really square - otherwise like you say the blade wanders/deflects too much.
For that reason I've stepped up to a 2mm blade for thicker materials where I want to reduce that deflection. Seems to work well so far and also doing fewer passes as the blade won't distort when it heats up.
Had corded, got rid of it because of dangerous kickback, have had 36v for quite awhile, no kickback, no cord.
Thanks for the reviews,
Also the trigger on the corded has an odd feel with the soft start, like they are out of sink, cordless trigger does not have that issue,
yeah there is AFT function(Active Feedback Sensing Technology) in it! but please be careful because it's 40V and disk ones are dangerous. I watched AC one as your video for the first time, I feel nostalgic
I bought the corded at the start of the year. Didn't want to have to get 4 batteries (I don't use Makita cordless kit.)
I also figured I'd I'm using the track saw, I'm using dust extraction, which for me is corded anyway, so I still need AC power.
It's one of those tools that you mostly hook up to a vacuum anyway. So I just strap (velcro or preferably full sleeve) the cord to the hose and it saves me the weight of a battery.
By the way, Festool sells bluetooth buttons that you can strap to the end of your vacuum hose. Press to toggle your vacuum, when you are using a battery powered tool. Great for quick clean-up as well. Works for me, even use it above the blade of tablesaws (with a shroud) to get rid of the resin or melamine spray.
I was surprised in the lack of power in the 40v 165mm circular saw compared to always had ryobi and bosh corded tools. It does the job though might stick to corded and wait until 80v come out see how they go.
Strawbyte workshop in the UK makes a clip in dust cover to increase dust extraction.
I was holding out for the 40v one, but needed a track saw recently so just got the corded one.. the cord is a bit annoying but I doub't I'll upgrade.
Whoa. Close call with the kick back there. Glad that moment didn't turn out bad. Didn't think about the the riving knife or lack there of, but thanks for pointing that out. Would love to get your take on the things you learned while making the cabinets. I have never made cabinets before, but want to in the near future and some tips or things to consider / take into account would be appreciated. Cheers!
I've had kickback on my Festool which has a riving knife but it was on a 2mm scoring cut so the knife wouldn't have come into play anyway and I'm pretty sure it was my fault as I was really reaching on that cut and think I tilted the saw over slightly. I'd still rather have the knife than not though.
Hey scott so long without video!!!! Regards from Belgium my friend
Hi Scott, thanks fot the great video, I would like to know what is the difference between a track saw, circular saw and a plunge saw? How do they differ in cut quallity? Thank you very much.
And for like 10-15 bucks on amazon, any corded vac can be cordless start