How to use JBL TUNE 220 TWS on Windows10

แชร์
ฝัง
  • เผยแพร่เมื่อ 2 ต.ค. 2024
  • Yes, you can use those earbuds on a Windows10 laptop computer, if that laptop has bluetooth (who doesn't nowadays?).
    It is very easy to pair, and then you can use it for your Webex or Jabber meetings, Zoom video conferences, and Google Hangouts or Meets ...
    Listen towards the end of my video where i show the sound quality of the microphones.
    Comment below and voice your opinion! It counts!

ความคิดเห็น • 133

  • @fertarotoficial
    @fertarotoficial 3 ปีที่แล้ว +5

    Thank you so much, it took me a single minute to do the configuration!!! You're great, cheers from Mexico City!!!

  • @vaishc6171
    @vaishc6171 2 ปีที่แล้ว +35

    if you are struggling with the laptop/computer asking for a pin, follow these steps and it will connect easily
    1. go to the Bluetooth menu and keep the earphone case open with both earphones inside
    2. make sure the earphones didn't autoconnect toyour phone orother device
    3. press on the headphone icon not the computer one
    I used jbl 225 tws, I hope this helped somebody

    • @berillio9384
      @berillio9384 2 ปีที่แล้ว +2

      You are the best!)

    • @LK-so6qu
      @LK-so6qu 2 ปีที่แล้ว +1

      Thank you so much!! I was struggling with this

    • @snouzers
      @snouzers 2 ปีที่แล้ว

      Such helpful, thanks

    • @URL_HERE
      @URL_HERE 2 ปีที่แล้ว

      I can't find my headphones as headphone icon. What I need to do? I have the same jbl 225

    • @hedgehog3763
      @hedgehog3763 2 ปีที่แล้ว +1

      I've been trying to find a solution for my 225tws, this is the only thing that worked. Thank you!

  • @ijuliaaaaa
    @ijuliaaaaa 3 ปีที่แล้ว +21

    everyone who struggles with your laptop asking for a pin, i contacted JBL customer support and they said that those type of earphones are only compatible with smartphones and tablets. they don't guarantee that the earphones will work with a laptop or pc

    • @spencer3506
      @spencer3506 3 ปีที่แล้ว +7

      rip me. :(

    • @justfelicia6671
      @justfelicia6671 3 ปีที่แล้ว

      thanks! I was looking for information about my JBL's. they connected once then started giving me the wrong icon to connect to bluetooth. I was getting a computer icon instead of the headphones

    • @Geekyemy
      @Geekyemy 3 ปีที่แล้ว +6

      You need to press the button on the side a little longer then usual until it shows "JBL TUNE225TWS", it worked for me

    • @verygoodbrother
      @verygoodbrother 3 ปีที่แล้ว

      @@Geekyemy I don't have any button on mine (jbl live pro+ tws)

    • @ronibr2373
      @ronibr2373 3 ปีที่แล้ว +4

      Hi :) I actually have JBL TUNE 225TWS and just after a few tried i got rid of the pin part. i just clicked on the right earbud. i hope I helped someone

  • @SKYTutorials
    @SKYTutorials 3 ปีที่แล้ว +2

    Great greetings from Deutschen land!

  • @yoncafloria1012
    @yoncafloria1012 3 ปีที่แล้ว +4

    hi, i have windows 10 and those jbl earphones. I have successfully connected the earphones with my smartphone but on my laptop they wont show up when i try to add them in the bluetooth section. Is there something i can do?

  • @crosseyedwillie
    @crosseyedwillie 4 ปีที่แล้ว +8

    what am I doing wrong? I did the Bluetooth search and it says "Pairing" but not "voice and music?"

    • @lucianasales3867
      @lucianasales3867 4 ปีที่แล้ว +4

      I have the same problem!

    • @Thecommentsectionisundefeated
      @Thecommentsectionisundefeated 4 ปีที่แล้ว +2

      I had the same issue, just update the drivers and it should work

    • @CrowRock003
      @CrowRock003 3 ปีที่แล้ว

      Just go to Control Panel > Hardware and Sound > Devices and Printers. Then find your device and Right Clic > Properties > "Services" tab and check all the boxes. Restart your computer.

  • @deadpool1991
    @deadpool1991 3 ปีที่แล้ว +3

    I dont trust people who dont have their taskbar on the bottom of the screen.

  • @fishycomics
    @fishycomics 4 ปีที่แล้ว +2

    looks awesome jbl is awesome like a disney product. I guess.

  • @richelledyanuae
    @richelledyanuae 4 ปีที่แล้ว +4

    It doesn't connect, only Paired status. I tried disconnecting again and tried again and still nothing. On mobile device there's no issue, only to the windows 10 laptop.

    • @lucianasales3867
      @lucianasales3867 4 ปีที่แล้ว

      Did you find a solution?

    • @richelledyanuae
      @richelledyanuae 4 ปีที่แล้ว

      @@lucianasales3867 nothing yet, I just decided to use the wired earphones instead.. bummer :(

    • @Thecommentsectionisundefeated
      @Thecommentsectionisundefeated 4 ปีที่แล้ว

      I had the same issue, just update the drivers and it should work

    • @aliyalti3051
      @aliyalti3051 3 ปีที่แล้ว

      @@Thecommentsectionisundefeated which driver?

    • @CrowRock003
      @CrowRock003 3 ปีที่แล้ว +1

      Just go to Control Panel > Hardware and Sound > Devices and Printers. Then find your device and Right Clic > Properties > "Services" tab and check all the boxes. Restart your computer.

  • @RCjunkie
    @RCjunkie ปีที่แล้ว

    mine keep asking for a PW I did 0000, and it still will not link up, to my phone or my tablet

  • @AMITAWAGHADE
    @AMITAWAGHADE ปีที่แล้ว

    My laptop is not detecting these earpods.

  • @tornike417
    @tornike417 2 ปีที่แล้ว

    whats wrong with mine, requests PIN code

  • @RodS_44
    @RodS_44 3 ปีที่แล้ว +2

    Unfortunately JBL phones only works with Windows to listen music, videos etc. If you want to use the JBL´s mic to make a call (Teams, Jabber, Webex, Skype, Zoom etc) it won´t work.

    • @Eoinvf
      @Eoinvf 3 ปีที่แล้ว +2

      The same headphones I’m using right now work fine for my phone then I try and connect them to my computer and it asks for a code I don’t have? Do u know what the issue is?

    • @Eoinvf
      @Eoinvf 3 ปีที่แล้ว

      Lmaaoo as I commented it finally started to work

    • @RodS_44
      @RodS_44 3 ปีที่แล้ว

      @@Eoinvf How did you make it work? Here it doesn't.

    • @RodS_44
      @RodS_44 3 ปีที่แล้ว

      @@Eoinvf If I enable the headset mic, I start to get the metallic sound.

  • @yrkkkkkkk
    @yrkkkkkkk 2 ปีที่แล้ว +1

    thank you!

  • @MastaShakeCSD16
    @MastaShakeCSD16 2 ปีที่แล้ว

    fellas take both earphones out of the case to put them into pairing mode

  • @mauricioromero6464
    @mauricioromero6464 2 ปีที่แล้ว +1

    Hi, if i have 125 version can i connect them to my pc, if so, can you show how to please

    • @mygiguser
      @mygiguser  2 ปีที่แล้ว

      That should work the same way as the 220 !

  • @Sviristelle
    @Sviristelle 2 ปีที่แล้ว +2

    Thank you so much! A quick and very useful tutorial.

  • @SaikoRevolution
    @SaikoRevolution 2 ปีที่แล้ว

    my pc want a pin

  • @InternetSupervillain
    @InternetSupervillain 2 ปีที่แล้ว

    Yeh I already knew this. Mine just keeps on failing to pair

  • @julienshen1604
    @julienshen1604 4 ปีที่แล้ว +3

    I bought this product recently which works fine (when they are connected to my mobile phone and to my laptop) except that when I connect them to my laptop Windows 10 and I attend a Teams meeting or Zoom meeting, they do not work. Indeed, they work fine when I record with voice recorder and when I watch videos on PC. Do you encounter the same problem as I? Thanks.

    • @mariedeceuninck7537
      @mariedeceuninck7537 4 ปีที่แล้ว

      I have the same problem!!
      Did you find a solution in the mean time?

    • @julienshen1604
      @julienshen1604 4 ปีที่แล้ว

      @@mariedeceuninck7537 no, I did not find the solution. I connect this product to my laptop to watch netflix but I use my mobile phone and the jbl to have teams meetings...

    • @RodS_44
      @RodS_44 3 ปีที่แล้ว +1

      JBL´s support keeps saying that´s a "Windows driver problem" but, even using the latest drivers, it doesn´t work. You can see that, when you get a headset certified for calls using Windows, all models comes with a proprietary USB Bluetooth connector with it.

    • @julienshen1604
      @julienshen1604 3 ปีที่แล้ว +1

      @@RodS_44 thx for the update, man

    • @angelicamartinez4354
      @angelicamartinez4354 3 ปีที่แล้ว +1

      Same here, they won’t work for Teams meetings 😭 They work for a few seconds and then suddenly I stop hearing 😕 anyone has found a solution? Thanks!

  • @jnicholas846
    @jnicholas846 3 ปีที่แล้ว +1

    I am using JBL TUNE225TWS but it says JBL TUNE225TWS-LE to connect to but i get error, Try connecting your device again. I even got it to ask for a PIN code?!?!? please help me. This is ridiculous how I cannot get this to work.

    • @mygiguser
      @mygiguser  3 ปีที่แล้ว

      This video was about the 220TWS, i am not sure about the 225TWS how they work and connect!?

    • @spezifisch4468
      @spezifisch4468 3 ปีที่แล้ว +8

      I had the same problem with my JBL tune225tws, too. My laptop also showed me two symbols with "JBL TUNE225TWS-LE". I pressed the buttons on the side a little but longer then usual, then they started to glow blue and on my laptop it said "JBL TUNE225TWS" and audio or something, clicked on it and it was able to connect. I can not guarantee if it works, but for me it did. Good luck.

    • @maldesreaves
      @maldesreaves 3 ปีที่แล้ว +1

      @@spezifisch4468 This worked for me perfectly. I just had to wait a while for the JBL TUNE225TWS to show up as an option. Thank you so much!

    • @sampanfilov5866
      @sampanfilov5866 3 ปีที่แล้ว +1

      @@spezifisch4468 Thank you, it works!

    • @eldescanso5769
      @eldescanso5769 3 ปีที่แล้ว +1

      @@spezifisch4468 thanks!!!!! 😅😅😅😅

  • @theravenhost
    @theravenhost 2 ปีที่แล้ว

    In my case they didn't want to connet because i already had another bluetooth headphones connected as bt audio device, try to unpair all other audio devices first

  • @eleasarh
    @eleasarh 3 ปีที่แล้ว +1

    nice video.

  • @kittyxyippee
    @kittyxyippee 2 ปีที่แล้ว

    I use the JBL 215 one. I connected it to my laptop finely but my problem is that 'stereo' isn't working, only hands-free is.

  • @gt3mad
    @gt3mad 2 ปีที่แล้ว

    I have the 230NC TWS and i can't connect them to pc

    • @saika-otori
      @saika-otori 2 ปีที่แล้ว

      me too

    • @gt3mad
      @gt3mad 2 ปีที่แล้ว

      @@saika-otori it was a bluetooth issue I contacted Microsoft and they helpèd me.

  • @damaestro5667
    @damaestro5667 2 ปีที่แล้ว

    it's not working

  • @justfelicia6671
    @justfelicia6671 3 ปีที่แล้ว +1

    I had not used voice recorder with my earbuds until this video. thanks for the instruction. very useful. I will be using this app often

  • @mahijerry24
    @mahijerry24 3 ปีที่แล้ว +1

    Hey! I tried to connect mine too but it didn't work. When you connected, headphone symbol was shown but in mine computer screen and a CPU types symbol showed up while finding the bluetooth device. I hope you understood what I am trying to tell you. Please can you tell me what to do now?

    • @mygiguser
      @mygiguser  3 ปีที่แล้ว

      sorry, i have no idea, never seen a CPU type symbol on my screen before.

    • @mahijerry24
      @mahijerry24 3 ปีที่แล้ว

      @@mygiguser um okay no problem. Thanks for replying though!

    • @jiwenhu397
      @jiwenhu397 2 ปีที่แล้ว +1

      we have the same problem, have you fixed it?

  • @ibrahimpathan7108
    @ibrahimpathan7108 2 ปีที่แล้ว +4

    Hi All,
    Thought this will help someone struggling to pair their JBL TUNE 220 TWS with android and laptops.
    I recently purchased a JBL TUNE 220 TWS and it connected to my iPhone without requiring a pin, but it did require a pin for my Android phone and laptop.
    To connect the earbuds to my laptop, I followed the steps below:
    I put the earbuds back in my container and double-checked that there were no other active Bluetooth devices near my laptop. I reopened the container and then I clicked add Bluetooth devices and seeing the proper pairing device popped up and that didn't require a password. I can also use these earbuds to make an audio/video call via MS Teams.
    To connect the earbuds to my Android, I followed the steps below:
    I put the earbuds back in my container and double-checked that there were no other active Bluetooth devices in the nearby area of my Android, and I reopened the container and then when I clicked find Bluetooth devices, it finally displayed the proper pairing device that didn't require a password. Now everything is fine.
    Thanks

    • @amitbastani
      @amitbastani 2 ปีที่แล้ว

      This was helpful and worked (Sep,2022). We deactivated all other Bluetooth devices and only connected the laptop in isolation.

  • @richiezed
    @richiezed 2 ปีที่แล้ว +1

    thanks very easy with your help!

    • @mygiguser
      @mygiguser  2 ปีที่แล้ว +1

      You're welcome!

  • @tim1410
    @tim1410 4 ปีที่แล้ว +1

    Hero

  • @andywickey6130
    @andywickey6130 3 ปีที่แล้ว

    Does JBL TUNE 220 TWS have volume control? and can it be paired to a phone?

  • @norfadhil816
    @norfadhil816 3 ปีที่แล้ว

    thanks g

  • @homidjohn
    @homidjohn 3 ปีที่แล้ว

    Do they switch easily between Android and Windows?

  • @rosecaironi1882
    @rosecaironi1882 3 ปีที่แล้ว

    I have jbl tune 225 tws and my computer wants a code pin but I doesn't have it. So can you help me ?

    • @mygiguser
      @mygiguser  3 ปีที่แล้ว

      i think it's 0000, it says it somewhere in the manual. could be wrong, not 100% sure, but worth a try!

    • @catarina5055
      @catarina5055 2 ปีที่แล้ว

      @@mygiguser thats not it. ive tried everything

  • @bezerkz9541
    @bezerkz9541 2 ปีที่แล้ว

    mine makes me enter a pin but i don’t have ones

    • @mygiguser
      @mygiguser  2 ปีที่แล้ว

      You could try the default pin 0000, 1111 or 1234.

  • @annag.1901
    @annag.1901 2 ปีที่แล้ว

    its working! Thank You!

  • @Utkaxxh
    @Utkaxxh 4 ปีที่แล้ว

    I have two questions:
    1. Do these lag while watching TH-cam Videos?
    2. Can these be connected to multiple devices? Like can I keep it connected to laptop and phone and switch between them seamlessly?
    TIA

    • @mygiguser
      @mygiguser  4 ปีที่แล้ว +1

      1. yes, there is a little lag, you can see it when people talk and you can see their lips.
      2. Yes, but it is not seamlessly. Once you have a device connected, you manually need to disconnect before the other device can connect and vice versa. Some button pushing is involved.

    • @Utkaxxh
      @Utkaxxh 4 ปีที่แล้ว

      @@mygiguser thanks!

  • @Marcpicker
    @Marcpicker 3 ปีที่แล้ว

    Sorry, that doesn't work for everybody because the device is as minimalist as the documentation that it comes with.

  • @СергейКапустин-ж2н
    @СергейКапустин-ж2н 3 ปีที่แล้ว

    Thanks! Finally i find useful video

  • @mohamedbousasa3349
    @mohamedbousasa3349 4 ปีที่แล้ว

    thanks :))) smile

  • @kridaykalra2745
    @kridaykalra2745 4 ปีที่แล้ว +1

    thank you so much

    • @mygiguser
      @mygiguser  4 ปีที่แล้ว

      You're welcome!

  • @erickgomezvega1591
    @erickgomezvega1591 2 ปีที่แล้ว

    i need pin to connect. Help!

  • @robloxbacongaming8025
    @robloxbacongaming8025 3 ปีที่แล้ว

    thank you !

  • @ezridax5809
    @ezridax5809 4 ปีที่แล้ว

    My other Bluetooth devices have so little latency it's not even noticeable when I connect them to my PC. But these things have around 300ms

    • @olik136
      @olik136 3 ปีที่แล้ว +1

      yep- completely unusable for anything but listening to music

  • @corsicanlulu
    @corsicanlulu 3 ปีที่แล้ว

    my laptop is asking for a pin to connect this device. anyone else?

    • @mygiguser
      @mygiguser  3 ปีที่แล้ว +1

      0000

    • @ijuliaaaaa
      @ijuliaaaaa 3 ปีที่แล้ว +2

      @@mygiguser yeah same! 0000, 1111 and 1234 do not work :(

    • @jnicholas846
      @jnicholas846 3 ปีที่แล้ว +2

      Anyone out there please help!

    • @ijuliaaaaa
      @ijuliaaaaa 3 ปีที่แล้ว

      @@jnicholas846 i contacted JBL customer support and they said that those type of earphones are only compatible with smartphones and tablets. they don't guarantee that the earphones will work with a laptop or pc