Hi @Yuke Wang. Sorry, I missed this comment earlier. I don't have a ZCU102. However, the process to quickly try out the PetaLinux BSP pre-built images would be the same. You'd download the BSP for ZCU102, untar, and put the pre-built BOOT.BIN & image.ub onto the 1st partition (FAT32 formatted) of your SD card.
I am inside the linux kernel of ZCU111. I am confused about the commands which can be used to program ZCU111 kernel. Could you please list or share the required commands for the kernel in FPGA/Evaluation board?? You can please share the link also of those commands. for eg: shutdown -h now which you used. I would like to know some more commands of those types. Please could you help me out?? Thank you
Hi Sukshith, "shutdown -h now" is just a Linux command. I don't know the full list of Linux utilities that are on the default PetaLinux image, but if there are commands you're looking for, you can just use the Linux "which" command to see if it's installed or not.
Thanks for the video. Did you format the SD card with 2 partitions Fat32 and Ext4? Were the 2 files put in Fat32 partition and Ext4 partition left blank? Thanks
@@sukshithshetty4847 On this page of the Xilinx wiki xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18842385/How+to+format+SD+card+for+SD+boot the intro states "While some Linux systems only require a single FAT-formatted boot partition (e.g. those that use a ramdisk), some systems require a second ext4 formatted partition to hold the root filesystem." In the example I show, I am only demonstrating the situation of single FAT-formatted boot partition & rootfs is on ramdisk. Ramdisk is more for quick evaluation purposes, poking around with what's already installed. If you want to do more with your rootfs, then you would take the extra steps of setting up an ext4 partition & putting rootfs there.
After Booting the SFP Ports are not showing up inside the CLI of linux kernel of FPGA. Only the 1G Ethernet is shown when 'ifconfig' is entered. Why are the SFP ports not showing? I require IP Address of the SFP ports which is connected to the PC. Any solution for this ??
Hi Sukshith, the best place to search for answers and post questions regarding ZCU111 support would be the Xilinx Versal and UltraScale Architecture forum: forums.xilinx.com/t5/Versal-and-UltraScale/bd-p/ultrascale
Thanks for detailed unboxing video. It was useful
Could you please also consider to make a video about ZCU102? Thanks a lot!
Hi @Yuke Wang. Sorry, I missed this comment earlier. I don't have a ZCU102. However, the process to quickly try out the PetaLinux BSP pre-built images would be the same. You'd download the BSP for ZCU102, untar, and put the pre-built BOOT.BIN & image.ub onto the 1st partition (FAT32 formatted) of your SD card.
I am inside the linux kernel of ZCU111. I am confused about the commands which can be used to program ZCU111 kernel. Could you please list or share the required commands for the kernel in FPGA/Evaluation board??
You can please share the link also of those commands.
for eg: shutdown -h now which you used.
I would like to know some more commands of those types. Please could you help me out??
Thank you
Hi Sukshith, "shutdown -h now" is just a Linux command. I don't know the full list of Linux utilities that are on the default PetaLinux image, but if there are commands you're looking for, you can just use the Linux "which" command to see if it's installed or not.
Thanks for the video. Did you format the SD card with 2 partitions Fat32 and Ext4? Were the 2 files put in Fat32 partition and Ext4 partition left blank?
Thanks
I put the files in the FAT32 partition. If you have an EXT4 partition on your SD card & wanted to put your own rootfs, you could put it there.
@@KestrelOmnitechInc But the documentation requires us to use both FAT32 and Ext4 partition for BOOT.BIN and image.ub ??
@@sukshithshetty4847 On this page of the Xilinx wiki xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18842385/How+to+format+SD+card+for+SD+boot the intro states "While some Linux systems only require a single FAT-formatted boot partition (e.g. those that use a ramdisk), some systems require a second ext4 formatted partition to hold the root filesystem." In the example I show, I am only demonstrating the situation of single FAT-formatted boot partition & rootfs is on ramdisk. Ramdisk is more for quick evaluation purposes, poking around with what's already installed. If you want to do more with your rootfs, then you would take the extra steps of setting up an ext4 partition & putting rootfs there.
After Booting the SFP Ports are not showing up inside the CLI of linux kernel of FPGA. Only the 1G Ethernet is shown when 'ifconfig' is entered.
Why are the SFP ports not showing? I require IP Address of the SFP ports which is connected to the PC.
Any solution for this ??
Hi Sukshith, the best place to search for answers and post questions regarding ZCU111 support would be the Xilinx Versal and UltraScale Architecture forum: forums.xilinx.com/t5/Versal-and-UltraScale/bd-p/ultrascale