Taigen Tanks Airsoft Recoil System Teardown

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ธ.ค. 2024

ความคิดเห็น • 41

  • @Eagle44
    @Eagle44 5 ปีที่แล้ว +1

    I appreciate the fact that you are actually for us, modifying our tanks ! If I wasn't a chicken I would do a video on my own modified smoker 😁 but it was too easy just put a cooling fan where the Piston is. If you have the V3 Electronics "(witch I recommend)" it is proportional and outstanding replacing the machine gun switch as the smoker on/off and a button for machine gun fire. This means you can turn your smoker on off via indoor outdoor by the way I have the M4A3 75 mm all metal airsoft 😎. And I have went ahead and replaced the tracks with the duckbill extensions no more getting stuck in the mud!!!🤣
    have a great year Tankers!!!

    • @fireace9045
      @fireace9045 4 ปีที่แล้ว +1

      so your button is now the smoker and the switch is the machine gun? Not sure I'm following here. But my smokers on my two Taigen tanks are pretty much nigh unto invisible inside or outdoor, I would love to hear more about modifying these to produce real smoke.

  • @panzertracks
    @panzertracks 4 ปีที่แล้ว +1

    This system can be hot wired to bypass the trigger and use any position on the controller to be used as the servo trigger. just go strait to the trigger cut it off and solder the negative from any output (air-soft motor, light, ) to it. That is it nothing complex. you can even use it on a Henglong board.

    • @daviddruxius8496
      @daviddruxius8496 3 ปีที่แล้ว +1

      Thank you for the Tipp !

    • @daviddruxius8496
      @daviddruxius8496 3 ปีที่แล้ว +1

      Maybe you have a video of it, be interested, because I have no idea what to do with this strange plug, I just don't know the other two?
      I would like to equip my Tiger 1 2.4 Ghz, the third generation with it (Taigen Tower)

  • @daviddruxius8496
    @daviddruxius8496 3 ปีที่แล้ว

    What is / is the switch cable used for at 0:02 -0:24 sec ! in the left edge of the picture (video) Selfbuild ?

  • @robberendse801
    @robberendse801 7 ปีที่แล้ว +1

    I have a problem with my taigen tiger 1 early version. The gun doesnt elavate and depress im not an expert in this sort of thing I would love if you would help me out I really dont know what to do

  • @JacKnife3705
    @JacKnife3705 ปีที่แล้ว +1

    I have thought about getting one for my Panzer III L airsoft version. Where can i get the parts for this feature?

    • @Schultz98
      @Schultz98 6 หลายเดือนก่อน

      Were you ever able to fit one???

  • @RCcontrollerloveit
    @RCcontrollerloveit 3 ปีที่แล้ว

    What mainboard did you use for the servo. please give me a name so i can find it

  • @AthleteDarius
    @AthleteDarius 5 ปีที่แล้ว +1

    Very good support!!!

  • @Holyganker
    @Holyganker 3 ปีที่แล้ว

    how do you adjust the recoil to match the recoil unit with the sound on henglong unit 6.0s? My gun recoil is backwards; it starts it's recoil before the actual shot and sound happen, returning as it shoots instead of recoiling backwards while it shoots. Is there a way to adjust this? It recoils backwards as the bb mechanism pulls backwards to charge itself then barrel pushes outwards as to throw the bb out of the barrel. Very unrealistic...backwards recoil!

  • @rgeller56
    @rgeller56 4 ปีที่แล้ว

    A1a2 abumes 1/16 hung long 6.0 u have it kit

  • @fireace9045
    @fireace9045 ปีที่แล้ว

    Just purchased this to upgrade my tiger1. My magic juju box must not be working as it wont recoil. 7.4 volts to juju box, servo moves upon startup, the single wire connected to back switch. Am i missing something?

    • @fireace9045
      @fireace9045 ปีที่แล้ว

      Issue resolved, the single wire from the juju box to the back switch was soldered to the wrong side of that back switch. Better call the guys at the factory...

  • @dragonmodel9262
    @dragonmodel9262 9 ปีที่แล้ว +2

    thats cool it shoots and recoils.
    im getting one..

  • @ShengTheCraftsman
    @ShengTheCraftsman 8 ปีที่แล้ว +2

    hi there, can i build that airsoft with recoil into my heng long 1/16 almost exactly the same like you have here? if it can be done, where do i buy? from taigen as well?

    • @TaigenTanks
      @TaigenTanks  8 ปีที่แล้ว

      Yes, with the turret will come a new power switch you will need to install to power the servo in the turret. From there it is pretty easy. Currently we have a 20% off sale and are doing free shipping on orders over $75 in the US this weekend so its a great time to snatch one up! We have both early, mid, and late version turrets in both metal and plastic!

    • @ShengTheCraftsman
      @ShengTheCraftsman 8 ปีที่แล้ว

      from what i heard from your facebook sites, they said my henglong's motherboard might not response to the recoil servo at all, i now worry about this, i probab;y had to change a lot of things and do you operate same power system as henglong battery of 7.4 volt?

    • @TaigenTanks
      @TaigenTanks  8 ปีที่แล้ว +1

      Kraftsman Sheng Please give us an email at IMEX@TaigenTanks.com and we will explain how to do it :)

    • @ShengTheCraftsman
      @ShengTheCraftsman 8 ปีที่แล้ว

      Taigen Tanks sent

    • @ShengTheCraftsman
      @ShengTheCraftsman 8 ปีที่แล้ว

      do you sell only the metal barrel and airsoft inner barrel then the servo system? in one set? i really want this.

  • @davidbridge3118
    @davidbridge3118 8 ปีที่แล้ว

    so i have a heng long tiger early i think 2.4mhz will the turret plug right in

  • @aliasgar4673
    @aliasgar4673 5 ปีที่แล้ว

    Can this fit the new Heng Long 6.0 tiger 1?

  • @Jaxter1137
    @Jaxter1137 5 ปีที่แล้ว +1

    2019 and I still haven’t been able too get one. 😔

  • @stevensheldon9271
    @stevensheldon9271 5 ปีที่แล้ว

    Do you make one for the Jagdpanther?

  • @ottoburgess1555
    @ottoburgess1555 4 ปีที่แล้ว

    not an rc tanker yet, but want to be. i have been a wot blitz player for years, and heavy into it since the lockdown. i am an older guy and not all that great of a player. looking at tank videos on youtube i discovered some very cool rc tank videos. that is getting me interested in becoming an rc tanker. this recoil modification is very cool, and i want it on my tank. i don't care for the wonky track giggle. this is way more realistic.
    ok, so i am trying to select my first rc tank. i would like to give taigen my business. i am split between the t90, walker bulldog, challenger 2, and abrams. i saw a challenger 2 with recoil gun as well. availability seems to be an issue. i would like a heng long pro version with upgraded metal components.
    which of these tanks would you recommend for a start?
    can i get one with the gun recoil already done, as this video seems to imply?
    thanks!

  • @davidbridge3118
    @davidbridge3118 8 ปีที่แล้ว

    so can you put the recoil air-soft on to my taigen tank early metal model and will it have all the connections there

  • @waggerification
    @waggerification 8 ปีที่แล้ว +1

    can I swap all this over to my original mantlet and turret ?

    • @TaigenTanks
      @TaigenTanks  8 ปีที่แล้ว

      The mantlet and barrel need to be kept, but the rest you can swap out yes. The mantlet is different on the airsoft recoil versions to allow the servo linkage to pass through and to accept the new barrel layout.

    • @waggerification
      @waggerification 8 ปีที่แล้ว

      thank you I will be getting one soon , but also have to save for one of the panthers your getting.

  • @daviddruxius8496
    @daviddruxius8496 3 ปีที่แล้ว

    A question about this, does this tower also work on 2.4Ghz
    Third Generation Tiger 1 (3818-1) Heng Long?
    One says no, another says yes
    now I am overwhelmed whether such a conversion is really worthwhile or not!

    • @PieAndChips
      @PieAndChips 2 ปีที่แล้ว +1

      The Taigen board is reverse engineered from the Heng Long RX-18, so if you are using the early 2.4ghz 3.0 it will work

    • @daviddruxius8496
      @daviddruxius8496 ปีที่แล้ว

      @@PieAndChips How and where would I have to do the electronics differently so that it works on the 2.4 Ghz of the 3rd generation, so far I haven't found a video about it, or instructions on how to do it!
      Would be grateful for any tip or video

  • @Smudgyeboy
    @Smudgyeboy 9 ปีที่แล้ว +1

    Cool thanks for the break down

  • @Model1928
    @Model1928 6 ปีที่แล้ว

    Is it normal for the servo area to heat up?

    • @Model1928
      @Model1928 6 ปีที่แล้ว

      +Taigen Tanks

  • @sticknodes1551
    @sticknodes1551 4 ปีที่แล้ว

    heng long is expensive