Advice from a structural engineer: if you drilled larger holes but down the centre line of the arm, you would reduce weight more and leave more material at the bottom and top (that is the material in compression and tension doing all the work). Thanks for this video!
I have a feeling the hole size was determined by his largest forstner bit. Do the holes even need to be circular? Could they be triangular, like you might see in a truss?
I must be lucky. My local big box often has Uni students working the panel saw and they're great. I've chatted with a few and they loved getting on the tools between assignments and lectures. I think that they'll turn out ok.
Wow! I would take an angry store associate any day. I seldom see any type of store associate. Aside from that, the panel saw at my home center has had an "out of order" sign on it since the day after the store opened. Where do you guys live?
Simple! Order a $60, sixteen piece forstner bit bit set from Amazon! They will come in a nice case, but loose in the case, and will have pre-dulled each other in transit!
I rushed to Home Depot as soon as I saw the video. Bought 8” zip ties and a full sheet of plywood. Still watching the video but can’t wait to build this!
After watching this video and passing out in a puddle of water from crying laughing I thought that this video was insanely funny. BRAVO! You deserve a OSCAR! Also whatever hardware store everyone went to get the plywood sheet probably thanks you for boosting their business. lol. Honestly, great video for those who complained!!!
One of the best workworking channels here, wish there were at least subtitles in normal units(metric)when giving measurements, so we the rest 95% of the world could understand it! :D
Your videos are like a good burrito. Even when the very end is not what you expected, you're still glad you consumed the whole thing. Keep up the great work!
I’m enjoying the comments section much more than the video. Very few people picked up on the sarcastic tone aimed at making fun of their complete lack of creativity.
Very cool, but with room for an improved range of motion! I made myself a boom arm years ago and it's still working great. But I doubled up on the hinges, so four door hinges. One pair goes one direction, the other pair goes the other direction. Joined together around a 2x2 near the wall. Doing this lets the arm swing both directions. And I lied about it being on the wall, it's mounted in the center of my garage on the garage door opener mounts (hanging down just below the opener) - and I get almost a full 360 degrees of coverage. I also put a 4' fluorescent light fixture on the bottom so I have better light under the boom wherever I want. Full disclosure: I only use my boom for power and light, and holding spring clamps - no vacuum. But that's for version 2. Throw in a third set of hinges in the middle of the boom and you can have the boom end point any place between full-length and "no"-length by doubling back upon itself, or anywhere in between.
When I first saw your boom arm, I thought it was crazy. After dragging around my dust collecting build in the shop for the past year, I am done with it. Putting my dust collection setup in one place and leveraging a boom arm is ideal.
man I've been struggling with dust collection in my small shop since I started. After seeing this video and deciding to build one of these myself, I can most definitely agree with you that this is the most useful shop accessory. Great video, thanks for doing what you do
Upgraded some dust collection in my small shop but more importantly I built the BOOM arm so it could reach everywhere. You’re brilliant and love the channel.
Why is it that all Home Depot/Lowes employees are so cranky when you ask them to use the panel saw? Seems like it would be the coolest thing you would be allowed to do there. Besides driving the forklift.
Because contrary to what it may look like, its retail. Have you ever heard anything good about working retail. Can you imagine your boss giving you a task list to complete during your shift and every time that you pick up your clipboard, someone needs help with something completely unrelated and outside your department but the person who's scheduled there is out sick. So now you're supposed to be pulling a $5k order but first need to help Nancy fine the right screw then explain to Harry, who's trying to save a buck, why you can't cut a 12 foot board in 12 one foot pieces and so on.
I worked at HD part time. I never felt like we were treated well by management (or customers) we were always understaffed because their staffing is based on profits on that day the previous year. Also you could show up, as a garden employee and be asked to cover any department in the store. Sometimes you were the only employee on the floor for two departments. I quit the day they were going to give me employee of the month. The look on the store managers face was priceless.
haha I love the insane value/simplicity the boom arm brings. I also very much enjoyed the comically delivered instructions - clearly noting your disappointment in the audience in not being able to tackle the build using the info noted in that last video lol priceless.
Saw your shop tour video and built one of these a few months ago. This thing is awesome! Best thing I've added in a long time, thank you! So much easier than dragging the vac everywhere! I built mine a little different. Framed with 2x3's and skinned with 1/4" plywood, my hose actually goes inside the arm. If I ever do another one I might actually frame it with 3/4" pine. The plywood skin makes it super rigid and it's only supporting a plastic hose and eventually maybe a power strip.
I'm in the middle of revamping my workshop and one of the issues I'm dealing with is better dust control. I will be building this for sure..so simple yet will be super useful. love your bids, keep up the good work
Dude! I just stumbled upon your videos. Let me say, it’s nice to see someone with my same sense of humor and dry enthusiasm in woodworking! Lol. Great content man! Keep it up, I’m thoroughly enjoying your content!
Was gonna install a 20 amp outlet on the ceiling over my bench by running conduit up my 10ft wall then buy an $80 cord reel to mount up there so I had power over my bench. This idea saved me hundreds of dollars and hours of time! Thank you!
I laughed a little too much at this. Great personality and awesome video as always. I just moved into a new home with a detached, 2-car garage so I'll be leaning on your videos for inspiration on my garage to workshop transformation journey.
LOL. Nice. I’m seriously pondering my plan on what I was going to do for my vacuum situation. 🤔. I don’t know if the boom arm will work in my shop, because of the garage door opener. 🤔. But, you’ve got me thinking now. 👍. Thanks n keep up the good work.
This is the second video I've watched after the recent 100k subscriber video. This is a Master class on useful information and humor. Thank you for being transparent.
This is a great idea. I have a pair of unused gate hinges that I think will be ideal for this application. My current solution has a shop vac with a very long hose that is suspended from a pulley with a counter-weight. It gives me plenty of coverage around my former two-car garage shop. It keeps the hose out of the way (mostly); but it's not easy to use. This looks like a much better solution.
I made the boomarm for my workshop. Use it al the time. Best idea ever! Thank you. I also had a dull bit but the holes look cool, so, and painted it black. Looks great, works great!!
Liked the idea so much I built one for myself. I made my arm telescoping so it reached centre of garage as well as work bench. Very convenient for cleanup instead of wrestling hose.
Very good set up I am still trying to get into woodworking haven’t saved enough for a table saw yet. But have been thinking about how I will do dust management this is genius. Only thing I’m going to change is adding a locking mechanism to lock it against the garage wall as I park my cars in their and don’t need it getting knocked into my Jeep
Normally I like to complicate an easy build. But I was in a rush and knew this video was out there. So I busted this out real quick. Just hung it and it’s fantastic. But my triangle was 11.25” because that’s the scrap i had. So only some credit to you. Thanks!
Just getting into woodworking. Thanks for the great videos and really helpful tips. This boom arm is a wonderful idea. I will be making one this weekend!
EFF NO we don't do project cuts!!! Well, I did; sometimes...it depended on how I felt that day and how cute you were. Cool video love your sense of humor!
Quick! Someone sponsor this guy! Learned so much from him and is easily one of my favourite channel to watch. Can you make a how to video on your crosscut sled? Looks killer!
I was waiting for John Lee Hooker! But seriously, thanks man, I'm going to build one of these for my new (old) dust extraction that I recently acquired. It's such an obviously useful addition to the home workshop. I'm gonna paint mine in some leftover house paint I have lying around. It won't mind!
Love it! Definitely planning on building something like this for my shop, and I have a spare Dust Deputy (knockoff) currently collecting ambient dust in the rafters above my shop. Round-over all the things!
Really nice design and build. And great tips on the construction. My bench is in the center of the shop with dust collection underneath. I built my boom from scrap aluminum channel and attached to a ceiling beam using doubled up hinges. Counterweights to balance it out. It swings through 340 degrees so reaches all my dust makers. Functional, but not as handsome a design as yours.
Awesome video, great professional production with footage of shopping for supplies, and good humor. I'm tired of tripping over my dust collection, this is my next project and I'm Subsribed.
Love the video and comical narration, and the end product is very cool and handy and fairly cheap considering plywood is only 79 thousand bucks a sheet lol kidding but not kidding... thanks for the sahre
I was just tripping on my damn hose yesterday! I think I need that boom arm, and now that you've explained all the complicated angles and mitres, I really don't have any excuses. Plus I already have a large container of various zip ties lengths, so there's a savings!
So my phone decided it was going to play the opening add then take forever to load the actual video. So I thought you were hilariously just staring at the camera for 10 seconds before I realized what was going on. Love that you made content as a sarcastic response to comments!
Love it!!!!!! Great job. I will be building this mo-Fo this weekend. 👍🏽 And you know… some may not, but appreciate the SassyHumor. It’s partly why I subscribed. 😉
I've got the quick and dirty version of this: a big spring clamp with a hook on it big enough to hold my small dust collection hose, which clips to a ladder I store on hooks from rhe ceiling. Can adjust to any rung to hang the hose where I need it.
super smart idea. I do a similar kind of thing with a/v and power cables, primarily for audio production in my garage. this example will definitely help my v2.0 and beyond. (I do a bit of "woodworking" in the form of screwing with guitars and doing setups, so a vacuum system would be wise over my bench for metal dust and fumes when wiring etc.)
I already have the wood, as well as the zip ties, paint, hinges, extension cord, vacuum hose extension, and screws. All I need now is the extractor, cyclone separator, and oh yeah, a workshop.
I use Cen Tec’s quick click hose connectors and dust system because they’re equal to quality and so much easier to remove and add on and cheaper. Nice boom arm
You said "Don't fall in love with anything here." I failed... loved the vid. Nice work. I've been thinking through doing something similar in my shop, good ideas here to learn from.
@1:06 LOL. It's more funny because it's true! I've abandoned carts full of ply/lumber after waiting too long. At @4:12 your video editing skills are mad good. Because we all *know* there were needless brads that were shot - cuz it's just fun. And thanks for the tip on Rockler extension. I tried so many different OD/ID combination that I lost track of what I bought and for what. I *LOVE* the ReelWorks extension cord so I'll get off my lazy butt and make a boom arm for the hose. I just got a SawStop (love it sooooo much) so it's time. And finally at the end, @6:17 you're pointing to your tablesaw sled as you said "can't help you, that's up to you" you're a genius and you don't even know it 😂
On several occasions I’ve brought a circular saw to break down panels in the parking lot (to fit them in my car). Probably the best reason to own a cordless circ saw for the average wood worker. I suppose if you don’t have a cordless circ saw, you could bring your regular circ saw, 100-feet of extension cord, and a six pack of beer for the security guard.
@@MarcosElMalo2 Yes, I now take some foam insulation boards, my circ and tracksaw and go to town in far corners of the parking lot. In two instances, someone asked "hey what's that saw you're using?" So I may even added to their sales! :)
Once I eventually clear all the crap out of my garage I’ll definitely be building one of these! Getting tired of cleaning dust off everything and sneezing 6 times after each time I’m working in the shop.
Advice from a structural engineer: if you drilled larger holes but down the centre line of the arm, you would reduce weight more and leave more material at the bottom and top (that is the material in compression and tension doing all the work). Thanks for this video!
Dan, where's the fun in knowing your construction isn't going to collapse on you mid critical cut? 🤣
Or do it plumber style and make the diameter larger than the arm.
I have a feeling the hole size was determined by his largest forstner bit. Do the holes even need to be circular? Could they be triangular, like you might see in a truss?
But would it be as "purty" :) Thanks for the solid advice.
judging by every crane, yes.
The angry store associate 😂 Good job on the video!
I must be lucky. My local big box often has Uni students working the panel saw and they're great. I've chatted with a few and they loved getting on the tools between assignments and lectures. I think that they'll turn out ok.
Wow! I would take an angry store associate any day. I seldom see any type of store associate. Aside from that, the panel saw at my home center has had an "out of order" sign on it since the day after the store opened. Where do you guys live?
Sadly the answer is almost always different when the store associate asks "Do you need help?" or if they ask "Can I help you?"
Thanks Matt!
I would rather shoot my own kneecaps off than try to get someone at Home Depot to help me cut something
Can you teach me how to dull my Forstner bit to the proper dullness level before I start this build? I want to make sure I get it right.
At least 3hrs of tumbling into a bag of rocks. Dust it off and it is as good as new.
Yes, loan it to a college workshop for a year. Make sure it's always handy and can be borrowed for inexplicable work next door in metal.
@@jasondoust4935 loan it to a college workshop for 10 minutes? 😳
Use it to drill through some 5mm steel plate.
Simple! Order a $60, sixteen piece forstner bit bit set from Amazon! They will come in a nice case, but loose in the case, and will have pre-dulled each other in transit!
I rushed to Home Depot as soon as I saw the video. Bought 8” zip ties and a full sheet of plywood. Still watching the video but can’t wait to build this!
Should we tell him
Sure, you need 12 inch ties... LOL
@@sztoocool oh no…tell me what?
@@WoodcraftBySuman How did those 8" zip ties work out?
@@FullRythym didn’t finish making the holes yet. My forestner bits are so dull!
“Randomly drilled out a bunch of holes” which were measured out and perfectly spaced. Loved it!
It’s about time you came out with another video. I’ve been stuck watching Bourbon Moth and Blacktail Studio.
🤣🤣🤣 👍
I've been watching them too!
Internet always wants the details and you have given us what we want. Take my thumb in the up position for your service.
After watching this video and passing out in a puddle of water from crying laughing I thought that this video was insanely funny. BRAVO! You deserve a OSCAR! Also whatever hardware store everyone went to get the plywood sheet probably thanks you for boosting their business. lol. Honestly, great video for those who complained!!!
One of the best workworking channels here, wish there were at least subtitles in normal units(metric)when giving measurements, so we the rest 95% of the world could understand it! :D
Yeah, I agree, many woodworking channels are doing it nowadays, only subtitles in metric would make a huge difference.
Your videos are like a good burrito. Even when the very end is not what you expected, you're still glad you consumed the whole thing. Keep up the great work!
Lol hope youre doing well
Dude that jump on to the outfeed table was SICK. Thanks for showing us the build with humor and wit as always. This was much needed.
You bet!
I’m enjoying the comments section much more than the video. Very few people picked up on the sarcastic tone aimed at making fun of their complete lack of creativity.
Very cool, but with room for an improved range of motion!
I made myself a boom arm years ago and it's still working great. But I doubled up on the hinges, so four door hinges. One pair goes one direction, the other pair goes the other direction. Joined together around a 2x2 near the wall. Doing this lets the arm swing both directions. And I lied about it being on the wall, it's mounted in the center of my garage on the garage door opener mounts (hanging down just below the opener) - and I get almost a full 360 degrees of coverage. I also put a 4' fluorescent light fixture on the bottom so I have better light under the boom wherever I want. Full disclosure: I only use my boom for power and light, and holding spring clamps - no vacuum. But that's for version 2.
Throw in a third set of hinges in the middle of the boom and you can have the boom end point any place between full-length and "no"-length by doubling back upon itself, or anywhere in between.
Putting a light on it seems like a good idea, thanks!
“Kinda Funny”? Talk about underselling. Found my new favorite. Thanks for informative and hilarious videos.
Quickly becoming my favorite woodworking channel!
Glad to hear it!
The humor is just fantastic.
When I first saw your boom arm, I thought it was crazy. After dragging around my dust collecting build in the shop for the past year, I am done with it. Putting my dust collection setup in one place and leveraging a boom arm is ideal.
welcome to the boom boom army - you will love it here
man I've been struggling with dust collection in my small shop since I started. After seeing this video and deciding to build one of these myself, I can most definitely agree with you that this is the most useful shop accessory. Great video, thanks for doing what you do
"Arm-2-D2" should be the boom's star wars pun name, btw. You can have that one :) Keep up the solid vids.
Epic. Good work.
So bad... Keep up the good work. :-)
Nice 👍
Thanks Kevin!
Quick and informative. Proper dust collection is needed the next time we empty garage and build out better workshop bits.
Upgraded some dust collection in my small shop but more importantly I built the BOOM arm so it could reach everywhere. You’re brilliant and love the channel.
Why is it that all Home Depot/Lowes employees are so cranky when you ask them to use the panel saw? Seems like it would be the coolest thing you would be allowed to do there. Besides driving the forklift.
Must be a worldwide epidemic cause they have the same attitude here in the uk 😂
It's because you actually asked them to do work... which is not what they are there to do.
Because contrary to what it may look like, its retail. Have you ever heard anything good about working retail. Can you imagine your boss giving you a task list to complete during your shift and every time that you pick up your clipboard, someone needs help with something completely unrelated and outside your department but the person who's scheduled there is out sick. So now you're supposed to be pulling a $5k order but first need to help Nancy fine the right screw then explain to Harry, who's trying to save a buck, why you can't cut a 12 foot board in 12 one foot pieces and so on.
I'm with you, I would think it's a great excuse to not answer questions about where to find a paint brush
I worked at HD part time. I never felt like we were treated well by management (or customers) we were always understaffed because their staffing is based on profits on that day the previous year. Also you could show up, as a garden employee and be asked to cover any department in the store. Sometimes you were the only employee on the floor for two departments. I quit the day they were going to give me employee of the month. The look on the store managers face was priceless.
haha I love the insane value/simplicity the boom arm brings. I also very much enjoyed the comically delivered instructions - clearly noting your disappointment in the audience in not being able to tackle the build using the info noted in that last video lol priceless.
;)
Some people really do need their hand held to survive this life. Figuring things out yourself is hard...
Saw your shop tour video and built one of these a few months ago. This thing is awesome! Best thing I've added in a long time, thank you! So much easier than dragging the vac everywhere! I built mine a little different. Framed with 2x3's and skinned with 1/4" plywood, my hose actually goes inside the arm. If I ever do another one I might actually frame it with 3/4" pine. The plywood skin makes it super rigid and it's only supporting a plastic hose and eventually maybe a power strip.
Sounds awesome!
Your videos are equal parts very informative and hilarious. Your dry, DGAF delivery is fantastic. Love your channel!
this channel is the straight FIRRRRRRREEEE. love you, lincoln st woodworking guy, you're awesome
"...And let's build a straight piece of wood that we screw into the wall." Yeah, seems pretty straight forward to me. Hilarious video!
Thanks
I'm in the middle of revamping my workshop and one of the issues I'm dealing with is better dust control. I will be building this for sure..so simple yet will be super useful. love your bids, keep up the good work
Your showmanship has polished ✨ well over the last year. An impressive and quite affordable boom! Thanks. You’re killing it,
thanks!
This is pure genius, total game changer for sure. I might push a couple of projects back just to build this sooner lol great job 👍👍
Dude! I just stumbled upon your videos. Let me say, it’s nice to see someone with my same sense of humor and dry enthusiasm in woodworking! Lol. Great content man! Keep it up, I’m thoroughly enjoying your content!
Was gonna install a 20 amp outlet on the ceiling over my bench by running conduit up my 10ft wall then buy an $80 cord reel to mount up there so I had power over my bench. This idea saved me hundreds of dollars and hours of time! Thank you!
I laughed a little too much at this. Great personality and awesome video as always. I just moved into a new home with a detached, 2-car garage so I'll be leaning on your videos for inspiration on my garage to workshop transformation journey.
Then you can use your workshop to build a new garage!
LOL. Nice. I’m seriously pondering my plan on what I was going to do for my vacuum situation. 🤔. I don’t know if the boom arm will work in my shop, because of the garage door opener. 🤔. But, you’ve got me thinking now. 👍. Thanks n keep up the good work.
You have a great sense of humor. Loved it. Cheers.
This is the second video I've watched after the recent 100k subscriber video. This is a Master class on useful information and humor. Thank you for being transparent.
Thank you!
Best idea for my small shop I have seen in a while. Thanks!
Great video! I can't wait to make one. People are sleeping on your channel. Such great content!
This is a great idea. I have a pair of unused gate hinges that I think will be ideal for this application. My current solution has a shop vac with a very long hose that is suspended from a pulley with a counter-weight. It gives me plenty of coverage around my former two-car garage shop. It keeps the hose out of the way (mostly); but it's not easy to use. This looks like a much better solution.
I subbed after the last comment about what i should do with the rest of the sheet goods. Appreciate quality dry humour
I made the boomarm for my workshop. Use it al the time. Best idea ever! Thank you.
I also had a dull bit but the holes look cool, so, and painted it black. Looks great, works great!!
Is it just me or is there a little bitterness about having to do this project over again? Love it.
;)
Liked the idea so much I built one for myself. I made my arm telescoping so it reached centre of garage as well as work bench. Very convenient for cleanup instead of wrestling hose.
Thanks. I’m building this. For reference, how long is the Festool hose? Enjoyed the video.
Fantastic video, I like the extra humor as well. You really present a professional and educational video series. Thanks
Very good set up I am still trying to get into woodworking haven’t saved enough for a table saw yet. But have been thinking about how I will do dust management this is genius. Only thing I’m going to change is adding a locking mechanism to lock it against the garage wall as I park my cars in their and don’t need it getting knocked into my Jeep
Love the style keep swinging that thing talking about the boom arm
Love it! I saw your dust collection video and was jealous of your boom arm. No more! Thanks
No problem
Normally I like to complicate an easy build. But I was in a rush and knew this video was out there. So I busted this out real quick. Just hung it and it’s fantastic. But my triangle was 11.25” because that’s the scrap i had. So only some credit to you. Thanks!
Just getting into woodworking. Thanks for the great videos and really helpful tips. This boom arm is a wonderful idea. I will be making one this weekend!
awesome - its a great addition
Everyone needs a friend like James! Epic.
This one cracked me up. As a complete beginner, I love your channel!
Thank Ryan
EFF NO we don't do project cuts!!! Well, I did; sometimes...it depended on how I felt that day and how cute you were. Cool video love your sense of humor!
Gotta make myself one of these. We just redid the shop and this would be the icing on the cake.
Quick! Someone sponsor this guy! Learned so much from him and is easily one of my favourite channel to watch. Can you make a how to video on your crosscut sled? Looks killer!
Ill make one at some point
I love your “No Bullshit” sign in the background! Makes me smile every time!
haha its so odd that it ends up perfectly in my shots ;)
I was waiting for John Lee Hooker! But seriously, thanks man, I'm going to build one of these for my new (old) dust extraction that I recently acquired. It's such an obviously useful addition to the home workshop. I'm gonna paint mine in some leftover house paint I have lying around. It won't mind!
Thank you so much for this elaborate tutorial on how to make this boom arm. Loved the 11inch zip correction lol😂Got em!!
This dudes awesome! I'm loving these videos!!!
Love it! Definitely planning on building something like this for my shop, and I have a spare Dust Deputy (knockoff) currently collecting ambient dust in the rafters above my shop.
Round-over all the things!
Thanks dude good to hear from you
Really nice design and build. And great tips on the construction. My bench is in the center of the shop with dust collection underneath. I built my boom from scrap aluminum channel and attached to a ceiling beam using doubled up hinges. Counterweights to balance it out. It swings through 340 degrees so reaches all my dust makers. Functional, but not as handsome a design as yours.
Your videos are greatly helping my self esteem.
This is just what my garage needs! I'm going to attach a light to mine as well. Thank you!
You’ve got great comic timing man, and the boom arm is ok too!
Awesome video, great professional production with footage of shopping for supplies, and good humor. I'm tired of tripping over my dust collection, this is my next project and I'm Subsribed.
Love the video and comical narration, and the end product is very cool and handy and fairly cheap considering plywood is only 79 thousand bucks a sheet lol kidding but not kidding... thanks for the sahre
thanks!
I'm impressed you worked in Vengaboys, upvoted and subscribed on that alone.
I was just tripping on my damn hose yesterday! I think I need that boom arm, and now that you've explained all the complicated angles and mitres, I really don't have any excuses. Plus I already have a large container of various zip ties lengths, so there's a savings!
Thanks for doing this video! Rockler had that hose and attachments on sale.
So my phone decided it was going to play the opening add then take forever to load the actual video. So I thought you were hilariously just staring at the camera for 10 seconds before I realized what was going on. Love that you made content as a sarcastic response to comments!
ha thats great!
Tongue-in-cheek comments and the segues were entertaining - two thumbs up
Thanks!
Love it!!!!!! Great job. I will be building this mo-Fo this weekend. 👍🏽
And you know… some may not, but appreciate the SassyHumor. It’s partly why I subscribed. 😉
I've got the quick and dirty version of this: a big spring clamp with a hook on it big enough to hold my small dust collection hose, which clips to a ladder I store on hooks from rhe ceiling. Can adjust to any rung to hang the hose where I need it.
super smart idea. I do a similar kind of thing with a/v and power cables, primarily for audio production in my garage. this example will definitely help my v2.0 and beyond. (I do a bit of "woodworking" in the form of screwing with guitars and doing setups, so a vacuum system would be wise over my bench for metal dust and fumes when wiring etc.)
Hilariously good video. On the winter build list. Thanks
Thank you!
"Let's build a straight piece of wood" This channel is a passive aggressive slaughterhouse. I love it.
lol thanks
😅 A good project for the day/weekend. Great video. Thanks for it.
Good idea. Good video. Made me chuckle. Thanks!
Shop Nation recommended you. Like your content. Keep pumping out great videos.
Thanks for coming
Change your channel description from kinda funny to hilarious. I love it. Keep up the great work!
Done!
put one of these in my shop a long time ago, great idea
I already have the wood, as well as the zip ties, paint, hinges, extension cord, vacuum hose extension, and screws. All I need now is the extractor, cyclone separator, and oh yeah, a workshop.
Love the sarcasm, bro. Keep it up. Channels great, btw!!! Watched all your videos already!
I use Cen Tec’s quick click hose connectors and dust system because they’re equal to quality and so much easier to remove and add on and cheaper. Nice boom arm
Built one last month and am wondering how I lived without one for soooooo loong. Love it and thanks for the video!
You said "Don't fall in love with anything here." I failed... loved the vid. Nice work. I've been thinking through doing something similar in my shop, good ideas here to learn from.
hahaha amazing comment - well played
Very cool! Definitely building one for my shop. Entertaining video!
I'm inspired to make one like this. thanks for putting it out there.
@1:06 LOL. It's more funny because it's true! I've abandoned carts full of ply/lumber after waiting too long. At @4:12 your video editing skills are mad good. Because we all *know* there were needless brads that were shot - cuz it's just fun. And thanks for the tip on Rockler extension. I tried so many different OD/ID combination that I lost track of what I bought and for what. I *LOVE* the ReelWorks extension cord so I'll get off my lazy butt and make a boom arm for the hose. I just got a SawStop (love it sooooo much) so it's time. And finally at the end, @6:17 you're pointing to your tablesaw sled as you said "can't help you, that's up to you" you're a genius and you don't even know it 😂
On several occasions I’ve brought a circular saw to break down panels in the parking lot (to fit them in my car). Probably the best reason to own a cordless circ saw for the average wood worker. I suppose if you don’t have a cordless circ saw, you could bring your regular circ saw, 100-feet of extension cord, and a six pack of beer for the security guard.
@@MarcosElMalo2 Yes, I now take some foam insulation boards, my circ and tracksaw and go to town in far corners of the parking lot. In two instances, someone asked "hey what's that saw you're using?" So I may even added to their sales! :)
Agree. Great video, content, humor, audio, video, lighting, and b-roll. You're going to make it big!
I added another piece of wood and 2 more hinges so that it swings 180 degrees. Love it.
LOVE the humor. great videos!
Awesome video nice setup and thanks for the laugh. 👌
Plywood, I love you. Imagine all the possibilities for projects.
endless possibilities
This is the first of your videos I've watched and it earned a Like and a subscription. I look forward to mor.
Much appreciated
"I randomly drilled..." ::Lays out exactly measured holes evenly spaced::
Once I eventually clear all the crap out of my garage I’ll definitely be building one of these! Getting tired of cleaning dust off everything and sneezing 6 times after each time I’m working in the shop.
Great video- that boom arm is a great idea and well executed.
Wow!You always have great information to share with woodworkers!Thank you!
Ive been designing my dream shop in my head for a year or so. Might add one of these just cuz
Love the parts about angry HD workers for cutting down the sheet, they always hate that lol. Great video, quick and to the point!