Sadly there is no way to buy them any more... I search for ever now and i cant find them... I've got the U'King Version of them and the Sound Mode is absoludely terrible... If any of you finds them. Please let me know 😄
I believe the issue is that they were never centered correctly.. During the load and unload in the traveling case, they could have skip a tooth or two in the gear that drives them.. I noticed that as well.. I believe it's totally user fault..
Can I configure two units together in master and slave configuration to work in sound mode so that they work in synchronized manner? I do not have a DMX controller and neither do I intend to buy one.
Thanks for the review. I was wondering if it's possible to put 1 unit in slave mode and the other in sound activated mode (as master) with a dmx cable? I dont have a dmx controller but i would like them to be in complete sync in sound mode.
On sound activation mode it does not, it just has a sensitivity.. But if you hook it to a DMX controller I believe you can adjust the speeds via a channel which most likely won't help if you run an auto setup like me.. Hope this helped.
Only problem with this light is the bracket in the back. It doesn’t hold the light up and it keep tilting down. I would get the Rockville brand instead.
I have modified my brackets to fit on my speaker stands so I can get a good tight hold on them, but I can totally understand where you're as I've heard of this issue before.. coming from
Awesome review! You mentioned you place the light into 13 channel mode. Does this mean you have the 13/19 channel model? I know others are a little different and I came here because I've been looking for the manual as I have one myself and cannot find it. I was particularly looking for the DMX assignments for both modes: 13 and 19 channel. Would you be willing to take pictures of the manual and post it somehwere?
Sadly there is no way to buy them any more... I search for ever now and i cant find them...
I've got the U'King Version of them and the Sound Mode is absoludely terrible...
If any of you finds them. Please let me know 😄
Hello you have have them linked at sound but they are not moving exactly same...do you have one upside down or or is it on reverse?.
I believe the issue is that they were never centered correctly.. During the load and unload in the traveling case, they could have skip a tooth or two in the gear that drives them.. I noticed that as well.. I believe it's totally user fault..
Can you post the Amazon link for these? I found some 109 bucks for a pair
Can I configure two units together in master and slave configuration to work in sound mode so that they work in synchronized manner? I do not have a DMX controller and neither do I intend to buy one.
That's how I have mine set up.. Sound mode master, then slave off master..
Where did you buy the clamp for the lights? Or did it come with it when you bought them? Thanks!
I used the bracket it came with and instead of nuts and bolts, I used heavy duty trailer pins.. Works 👍
Thanks for the review. I was wondering if it's possible to put 1 unit in slave mode and the other in sound activated mode (as master) with a dmx cable? I dont have a dmx controller but i would like them to be in complete sync in sound mode.
Yes.. That is how I run my shows..
Hello...when using dmx...do they have a speed control when on auto? I would like to have them on slow mode for slow slongs
On sound activation mode it does not, it just has a sensitivity.. But if you hook it to a DMX controller I believe you can adjust the speeds via a channel which most likely won't help if you run an auto setup like me.. Hope this helped.
Heyy, how come shows same color on all of them? usually it’s like one has individual
I'm slaving off the master.. I hope that I'm understanding your question correctly..
Hey, did u buy the brackets yourself or did it come with the spider lights? If u bought it, what type of brackets did u buy?
Stocks brackets that came with the lights.. Just used a trailer safety pin on the speaker stand instead of the thumb screw.. Hope that helps
Could you without using a dmx control board set them up to pan slow inverse a
White led only? Trying to simulate a movie premiere spot light effect
I don't think you can.. it will only do an auto run of all the colors.. Well at least my models that is.. There may be a model out there that can..
Only problem with this light is the bracket in the back. It doesn’t hold the light up and it keep tilting down. I would get the Rockville brand instead.
I have modified my brackets to fit on my speaker stands so I can get a good tight hold on them, but I can totally understand where you're as I've heard of this issue before.. coming from
Awesome review! You mentioned you place the light into 13 channel mode. Does this mean you have the 13/19 channel model? I know others are a little different and I came here because I've been looking for the manual as I have one myself and cannot find it. I was particularly looking for the DMX assignments for both modes: 13 and 19 channel. Would you be willing to take pictures of the manual and post it somehwere?
Sure thing.. Find us on Facebook under Collins Family Adventures and send us a PM..
@@CollinsFamilyAdventures great! Thank you again!
Can you pair them without a dmx.
If your talking about them working together ( Slave mode ) then yes.. I have one as the master and the other as the slave. hope this helps .
What is the name of what holds the light and where do I get it, thank you very much
Thanks for watching..
There called Locking Pins.. Or some call it trailer hitch pins.. You can get there at any hardware or automotive store..
@@CollinsFamilyAdventures thank you very much friend
i dont like advertizing