@@cyberstar251 No, I don't have time for that right now, it's interesting that he's doing it. But if I go to produce a 3D printer, I will use a Rambo board that is more reliable, which is also used by the leading manufacturer of 3D printers, Prusa. This board I have in the video is a cheap board from Aliexpress. Maybe a new firmware has already been released where this bug is fixed, but I don't know if I will have time to come back, maybe I'll sell a few euros. So far, the device just lies in the basement.
ja sa týmto už nezaoberám, popravde sa divím že na toto ešte niekto reaguje. Nižšie je spomenuté od užívatela intelligenceservices že stlačí tlačidlo reset pred vložením SD karty a malo by to ísť.. Ale všimol som si že vleľa užívateľov má s týmto problém. Keby mám znovu niečo staviať tak by som zrejme použil dosku typu Rambo, používajú ju aj v tlačiarnach Prusa. Poprípade sa to dá riešit aj pomocou cnc planet. Ale vo všeobecnosti moja rada, vyhnite sa lacným čínskym napodobeninám, mám s tým zle skúsenosti, kupujte len originálne diely. Stalo sa mi, že som kupoval lacnú dosku z aliexpresu a počas chodu sa mi kedykoľvek reštartovala doska alebo sa odpojila.
@@mohammedakakeza en: I'm not dealing with this anymore, I'm really surprised that anyone is still responding to this. It is mentioned below by the user intelligenceservices that he presses the reset button before inserting the SD card and it should work.. But I noticed that many users have a problem with this. If I were to build something again, I would probably use a Rambo-type board, they also use it in Prusa printers. Alternatively, it can also be solved using cnc planets. But in general my advice, avoid cheap Chinese imitations, I have bad experience with it, buy only original parts. It happened to me that I was buying a cheap board from AliExpress, and the board restarted or disconnected at any time during operation.
I have the same what to do ? sdsupport enabled on firmware
In the marlin need active SD Support!!!
SD support ist active :/
@@vladimirrepka1363 did you ever fix this?
@@cyberstar251
No, I don't have time for that right now, it's interesting that he's doing it. But if I go to produce a 3D printer, I will use a Rambo board that is more reliable, which is also used by the leading manufacturer of 3D printers, Prusa. This board I have in the video is a cheap board from Aliexpress. Maybe a new firmware has already been released where this bug is fixed, but I don't know if I will have time to come back, maybe I'll sell a few euros. So far, the device just lies in the basement.
sir you solve this problem or not because i have the same problem i need solution plz
ja sa týmto už nezaoberám, popravde sa divím že na toto ešte niekto reaguje. Nižšie je spomenuté od užívatela intelligenceservices že stlačí tlačidlo reset pred vložením SD karty a malo by to ísť.. Ale všimol som si že vleľa užívateľov má s týmto problém. Keby mám znovu niečo staviať tak by som zrejme použil dosku typu Rambo, používajú ju aj v tlačiarnach Prusa. Poprípade sa to dá riešit aj pomocou cnc planet. Ale vo všeobecnosti moja rada, vyhnite sa lacným čínskym napodobeninám, mám s tým zle skúsenosti, kupujte len originálne diely. Stalo sa mi, že som kupoval lacnú dosku z aliexpresu a počas chodu sa mi kedykoľvek reštartovala doska alebo sa odpojila.
@@vladimirrepka1363 can you speak englich plz i need solution for sd card
@@mohammedakakeza en: I'm not dealing with this anymore, I'm really surprised that anyone is still responding to this. It is mentioned below by the user intelligenceservices that he presses the reset button before inserting the SD card and it should work.. But I noticed that many users have a problem with this. If I were to build something again, I would probably use a Rambo-type board, they also use it in Prusa printers. Alternatively, it can also be solved using cnc planets. But in general my advice, avoid cheap Chinese imitations, I have bad experience with it, buy only original parts. It happened to me that I was buying a cheap board from AliExpress, and the board restarted or disconnected at any time during operation.
SOLUCION 2022 colocar cinta doble contacto en el adaptador del memory (Lograr una presión en el parte superior del lector)
Agradecido con el de arriba, gracias por la solucion
Did you find solution for this issue?
basta trocar o soquete do display... pino de segurança quebrado!
Hello everyone
I have a same problem 😔😔😔😔
Please upload tutorial program marlin display lcd
i already switched to cnc planet and marlin board i don't even know where i am anymore
Can u help me my lcd is showing error :Mintemp .. As i give the command of printing. how can i can fix it
change ur thermistor
Can Lcd 2004 use for uno r3?
Mám podobné problémy. Obvykle stisknu resetovací tlačítko po vložení karty SD.
Mám stejný problém... :/ našel jste řešení?
nie, jediné riešenie je výmena
Nemyslím si, mám druhé RAMPSy a dělá to na obou..
taky mám ten problém na doporučení na netu a nastavení v marlinu nepomáhá nebo jste už přišli na chybu?Kde,co a jak?
I have the same problem you could resolve It?
same here
Same here, did anyone found a solution?
@@deltabravo2810 yes try to tilt the sd afapter while its plugged in , or do like me : soldernthe sd adapter directly into the lcd