Starting fluid has always been my go to for vacuum leaks. I thought it was sketchy AF when my neighbor (50 year shop owner)taught me how to do it. Just spray it anywhere that could be leaking.
Nice! Man we need a couple more Matthews in Chicago. I also work on cars but i don't do nothing close to the jobs that you do. And your prices are great as well. Keep up the good work buddy.🤙🏼
I use to work on all the foreign products cause no one else would in the City I was in.... You'll find they are more challenging but I also had more fun and satisfaction in doing so...
This is the difference between a mechanic and a part changer. If you can’t find the problem then you just need to be told what to do by someone who does. My guys diagnosis game is nice.
I had a buddy with one those and he added a aftermarket coolant tank or something and it did the same thing it was so close to a sensor wires and they rubbed and looked just like that.
Parker I’m dealing with a Honda 01 2.3 4 cylinder getting fuel to the rail not the injectors it’s got a brand new import direct fuel pump I got spark I got voltage I’m getting some weird readings on the ground side of the injector and at the main relay distributors oil soaked it will start if I spray fuel at the throttle. When it dies it’s a distinct like it’s lost fuel.
Dude’s doing engine and tranny swaps in peoples’ driveways…what are you talking about?! Humble yourself cause I can guarantee you are not on this guys level
@redtib03 I pulled the engine from my 2002 ford ranger with the 4.0 in my garage that's not quite big enough for the job and no heat. It sucks doing that.. this dude seems like a cool dude and idk why people talk smack about him. The job I did went ok but it gets cold in Illinois in the winter and some days I didn't even go outside to do it cause it was too cold and this dude has to keep doing it even if it's snowing. I give this dude props for sure
keep pumping these videos out man the viewers are here!!
Starting fluid has always been my go to for vacuum leaks. I thought it was sketchy AF when my neighbor (50 year shop owner)taught me how to do it. Just spray it anywhere that could be leaking.
Here's the deal buckko, your total is 750 dollars
part 20
Labor .5hr
Mat rate I’m fine at around $1000 hr
@@teonzx1088🤦🏼
The supercharged and turbo minis run real hot so electrical wires have a tendency to rot and decay sooner.
Knowledge is power. You have so much to pass on. Start an ROP program to teach people how to fix their cars and pass your skills.
Nice! Man we need a couple more Matthews in Chicago. I also work on cars but i don't do nothing close to the jobs that you do. And your prices are great as well.
Keep up the good work buddy.🤙🏼
I love those type of repairs. Great job sir.
You can try baby oil for your smoke test machine. Puts out plenty of smoke and is very cheap. (Not sure what machine you have, but it works great.)
Good catch.
Great find!
Better lucky than good. ❤❤
I use to work on all the foreign products cause no one else would in the City I was in.... You'll find they are more challenging but I also had more fun and satisfaction in doing so...
Good job! But intake leak will cause a lean or rich code e with misfire. But good find
This is the difference between a mechanic and a part changer. If you can’t find the problem then you just need to be told what to do by someone who does. My guys diagnosis game is nice.
Good one!!
Owen Wilson as a mechanic
Need some of that Johnson and Johnson baby oil buddy for the smoke machines been using it for years
Diddy bought all the oil
@jimshoe5069 so it would seem 😂
isnt the 'smoke' in the smoke test just mineral oil?
yeah you can use baby oil. Never heard someone says a smoke test is expensive
Parker did u check the vac line under the super charger on the left side they like to fall of?
I had a buddy with one those and he added a aftermarket coolant tank or something and it did the same thing it was so close to a sensor wires and they rubbed and looked just like that.
Nice!
I use baby oil in my smoke machine.
Back in the day we had our number listed as phil mckracken in the phone book.
Parker I’m dealing with a Honda 01 2.3 4 cylinder getting fuel to the rail not the injectors it’s got a brand new import direct fuel pump I got spark I got voltage I’m getting some weird readings on the ground side of the injector and at the main relay distributors oil soaked it will start if I spray fuel at the throttle. When it dies it’s a distinct like it’s lost fuel.
There could be a relay like a radio suppression relay that controls/Fires the injectors
Prob blew a fuse as well.
Use volt meter and back probe items
I still don't think that would cause the very bad acceleration but would like to get an update on this
Taxes ?
What?
underreport of course
@@massgainer911There's no tax on labor.
Run a cylinder compression test first
How does that even happen? Rodents? Vibration?
I couldn’t really see it, I’m assuming the wires were fried and broken?
Sharp angle of the connector with minimal slack, with vibration over time
Worse, its just a mini
It's like rubbing your sack. It will tear up over time
Love your videos but please don't curse so much. Not necessary. Also check the MAF sensor. Major air flow problems could happen
Dude act like he know what he doing 😂😂
He does, most of the time
How much for a copy of your all your notes!
How is this guy a mechanic? Who gave him that title? I'm a diy no training guy with cars and I'm in your level...
Go out and do the work he is doing then
@@710grabtherig I really could just diagnose and not fix it
@@Teyz1989 then you wouldn't be able to fix it.. he does
Dude’s doing engine and tranny swaps in peoples’ driveways…what are you talking about?! Humble yourself cause I can guarantee you are not on this guys level
@redtib03 I pulled the engine from my 2002 ford ranger with the 4.0 in my garage that's not quite big enough for the job and no heat. It sucks doing that.. this dude seems like a cool dude and idk why people talk smack about him. The job I did went ok but it gets cold in Illinois in the winter and some days I didn't even go outside to do it cause it was too cold and this dude has to keep doing it even if it's snowing. I give this dude props for sure
Mini coopers are trash
Dude a fake mechanic I called and never answered
Definitely not a fake mechanic lol he runs his own business by himself. Probably busy my guy.
It’s always a white gut defending a white guy😂😂😂 I trust a blind Chinese mechanic before an American 😂😂😂😂😂
" vietguy "
should change that to " fresh of boat incell "