WarDragon Decoding Drone Remote ID w/ Compiled Sniffle Firmware + WireShark (CatSniffer v3)
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- In this video we'll compile Sniffle firmware for the CatSniffer v3 device and setup Wireshark for the purposes of decoding FAA Remote ID signals emitted by drones. More on what Remote ID can be found here,
www.faa.gov/ua...
From start to finish, I walk you through each step, demonstrating how to establish a connection between CatSniffer v3 and Wireshark. Learn how to set up an extcap symlink to Sniffle tools and configure a Wireshark dissector, enabling Wireshark to recognize extended frames and long-range BT5 signals.
With a Holy Stone Remote ID transmitter as my test subject, I show the decoding process in action as Wireshark decodes its signals with the assistance of CatSniffer and Wireshark dissectors.
To replicate this setup, you can find essential resources below:
Sniffle GitHub repository: github.com/ncc...
CatSniffer Tools: github.com/Ele...
Wireshark dissector: github.com/sul...
Special thanks to HackerWarehouse for their support and provision of the CatSniffer during the last DEFCON, as well as a big thanks to Electronic Cats for later getting me on to the V3 CatSniffer.
Join me in unraveling the intricacies of FAA Remote ID compliance and delve into the fascinating world of drone signal analysis with the CatSniffer v3 and Wireshark integration.
WarDragon available here (when in stock):
cemaxecuter.co...
Don't miss out on staying connected:
Catch updates on Twitter: / cemaxecuter
Supporting the channel:
If you appreciate the value this content brings, I invite you to consider extending your support through Patreon: / cemaxecuter
That's so tight, man!
Really cool!
After a simple search, it seems that the Remote ID is based on WiFi or Bluetooth transmission. Have you tried working with WiFi and Wireshark to capture the Remote ID,
What WiFi sniffing software is available for use
The same dissector works with WiFi and it recommends some tool in windows, but I’m willing to bet that maybe aircrack on channel 6 at 20mhz wide to a fifo pcap would probably work.
Really great work. I shared it with my friends and I will support your channel by republishing your clips if you give me permission to do so.
Not sure what you mean by republishing them, it’d be great if you just link them to mine. I don’t want the videos pulled down and just rebranded. That takes away from all the work put on. Plus linking them to the original helps me to continue to do them.
Too bad there`s no ESP32 version about 1000x easier to use !
But then it wouldn’t have the benefits of what the SDR is providing, which depending on bandwidth, can decode all presets at one time across 20+Mhz bandwidth.
@@cemaxecuter7783 yeah I guess