Man some of these consoles made me RAGE 😂 and it only gets better… make sure to tune in every Wednesday and Friday for the rest of The Texas Load 2 episodes!
4:57 This is known as the false overheating issue which is specific to Corona and Winchester motherboards where a group of 6, 0 ohm resistors fails and makes the console think it is overheating as soon as it is turned on which is impossible. They are part of the temperature sensor circuitry and can be replaced or bridge the solder joints where a resistor was and the console will work normally again.
@@luke9511 you can bridge the contacts where a resistor was. They are just 0 ohm resistors as mentioned and serve no purpose but to close the temperature sensor circuit. It won't cause any damage.
@@vinyminotaur2694 0 ohm resistors are commonly used as fuses when manufacturers cheap out, either replace or swap with actual fuses rated just over the peak wattage expected on the circuit.
@@vinyminotaur2694 No, no please don't do that. 0 ohm resistors are used as fuses. The weakest link in case something goes wrong. If they served no purpose they wouldn't be there
Fun fact about the Metro dashboard, you can kind of tell which version it is depending on how much shading there is, like the first dashboard we see in this video is darker than the final metro dashboard, if the background is light but the selected green box is shaded on the xbox mini menu (when you press the xbox button in the middle) you have a dashboard most likely from 2013 Also judging from that Wii menu version at 18:27 That Wii must have no been played since 2007 or 2008 because for one, the SD Card menu is missing, and two, the Wii Shop Channel icon looks different from the final
I think that was edited in I don't think he actually hit his head on the wall or else he would have a bad headache or his head would of been bleeding a bit
Yeah i have noticed that too. i think its because the ps3 is so quick and easy to reset. the xbox you gotta enter the serial number and Wiis got the parental locks
That slim that had high fan spin immediately can be easily fixed. There is a bank of 0 ohm resistors and a resistor has failed literally bridging the resistor will fix it
When it comes to the NES and SNES minis. I think it is a matter of few look in on knowing it can do those save states. This does not discount that it is true that many that bought one of them found they are not as interested in it as they thought they would be, something even more true for ones that would be given up to a Goodwill.
I'm going to theorize that PS3's are reset more often because the PS3 was often used to store photos and videos. I'll let you fill in the blanks there.
i know this would probably only be interesting to a few people, but you should show the system version on the wiis, because that last wii was definitely not the latest version. could also date the console, as if it's not latest (4.3) it might not have been played (or have played games released) past 2010.
Yooo been a big fan since 2019, I remember that game Slender the arrival, it's the second ever slenderman game and takes place after the first one if you're wondering. Slender the arrival was made around 2013 I think. Love your videos dude.
The quick RROD on the slim was a resistor that was broken, as the thermal stage for the flashing red dot would be normal if it overheated in 12 seconds or so.
I Take Very Good Care Of My Xbox 360 Slim Has Some Minor Damage But Only From Leaning Against The Chair Stool Got Mine From A Car Crash Settlement Back In 2012 When I Was 5
For the second 360 the "xenon" motherboard, it is actually considered as an elpis motherboard now as it was fixed in 09. What makes it an elpis is the gpu, as the board is technically a xenon board and essentially the same other than the gpu which is replaced from the Y1 on the xenons to the Elpis gpu, hence the name.
It's a little thing "gat bobblehead" Avatar item is from a game called saints row 3 I used to have it on my avatar LOL don't know why also to be honest I still play my Xbox 360 daily r.i.p marketplace
Can't wait for Jacob to turn on a console and the avatar has a message saying "if you're reading this then you've found my secret toilet xbox" or something else unhinged like that
The System Management Controller (SMC) tracks the eDRAM thermal diode readings from the ANA/HANA. Should the eDRAM's temperature surpass the Trip Temperature set in the SMC Configuration, the SMC will initiate EC_THERMAL mode, and a 0013 error code will appear on the front panel.
Eh...every console I've had and gotten rid of for whatever reason I've made sure to factory reset before I do anything, and your vids show exactly why (not being snarky). I wouldn't want someone taking the console and having access to my account.
Just wondering if you need the same power supply that corresponds with the motherboard? Or are they all universal? Like does an early power supply work with a late model motherboard?
I have a console from a month after launch that seems untouched it still works and still blows out hot air. No signs of tampering. maybe microsoft fixed it at some point but there is no service date on it. but there is a 2011 dashboard it is an NXE Kinect hybrid. so its kind awkward as the OG warranty seal is still there untouched. the warranty seal was never replaced with the newer one. and the console is also very clean. weird huh?
I thought it was sick with the MachineHead DVD in the last one. I guess you listen to some great metal. Do you know nothingface? That's what my sn comes from. Anyway, I love your channel cowboy! Like a ten ton hammer
So i suck at fixing things so could i send my xbox 360 to you and have it fixed (been a fan since the beginning, subscribed during the beginning of the texas load*
![[#2024MAMA] BIGBANG (빅뱅) - 뱅뱅뱅 (BANG BANG BANG) + FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/EQsYfiPR9uM/mqdefault.jpg)
Man some of these consoles made me RAGE 😂 and it only gets better… make sure to tune in every Wednesday and Friday for the rest of The Texas Load 2 episodes!
i will!
Better not be click baiting us bro.
Jacob i have a jailbroken PS4.
👌
@@Niko_BellicfromLibertyCity nice
This Xbox was underneath the toilet… cool - Jacob R
I always keep my Xbox under the toilet!!
Where it belongs (airhorns)
@@gregchandler900same who doesn’t
🤣@@RenegadePandaZ
4:57
This is known as the false overheating issue which is specific to Corona and Winchester motherboards where a group of 6, 0 ohm resistors fails and makes the console think it is overheating as soon as it is turned on which is impossible. They are part of the temperature sensor circuitry and can be replaced or bridge the solder joints where a resistor was and the console will work normally again.
never ever bridge the points it may not cause damage at the time but it will later, ALWAYS replace the part
@@luke9511 you can bridge the contacts where a resistor was. They are just 0 ohm resistors as mentioned and serve no purpose but to close the temperature sensor circuit. It won't cause any damage.
@@vinyminotaur2694 0 ohm resistors are commonly used as fuses when manufacturers cheap out, either replace or swap with actual fuses rated just over the peak wattage expected on the circuit.
@@vinyminotaur2694 No, no please don't do that. 0 ohm resistors are used as fuses. The weakest link in case something goes wrong. If they served no purpose they wouldn't be there
@@jsteezy80 Josh Davidson himself said that you can just bridge the points just fine
Fun fact about the Metro dashboard, you can kind of tell which version it is depending on how much shading there is, like the first dashboard we see in this video is darker than the final metro dashboard, if the background is light but the selected green box is shaded on the xbox mini menu (when you press the xbox button in the middle) you have a dashboard most likely from 2013
Also judging from that Wii menu version at 18:27 That Wii must have no been played since 2007 or 2008 because for one, the SD Card menu is missing, and two, the Wii Shop Channel icon looks different from the final
The last wii is probably a pre-2008 wii considering the WSC banner is old
The Last Wii was created in 2010 I think
@@BoneyOfficialooolast as in the last shown on video, not literally the last wii
@@MCWiirdo ohhhhhhh
5:00 that's an easy fix if you know how to solder, you just need to replace the six resistors near the CPU.
Him: give me free game
Wii: turns into a cicada
13:24
thats blur. Awesome Arcade Racing Game with Power Ups and stuff.
Him: *turns on the Wii*
The Wii: *bug sounds*
I was surprised that the second Xbox worked seeing how beat up it was.
Was not expecting that ending
Me Neither LOL
Dude broke the wall
I think that was edited in I don't think he actually hit his head on the wall or else he would have a bad headache or his head would of been bleeding a bit
looked like one of those stickers that look like a hole.
Love these videos Jacob been a big fan for ages
Let’s go
@jrob0021 same wish I could bid on PvZ on whatnot but it's too expensive to ship to UK rip
I don’t think that’s how you’re supposed to break the fourth wall.
Yeah i have noticed that too. i think its because the ps3 is so quick and easy to reset. the xbox you gotta enter the serial number and Wiis got the parental locks
5:00 this is a temp sensor issue. common problem. it can be fixed by switching out some broken resistors.
I need some more videos!!!! Love your content Bro, I find your videos so interesting. Is it time for another one yet? Lmfao😂
"Is DKOldies a scam? No."
I love your content. It's really chill
THATS MY XBOX
Prove it 😂
Very cool
nuh uh
Proof?
X to doubt
4:51
My Xbox did the exact same thing. I fixed it by removing and soldering back the R4D3 resistors
That slim that had high fan spin immediately can be easily fixed. There is a bank of 0 ohm resistors and a resistor has failed literally bridging the resistor will fix it
The hole n the wall killed me 😭😭😭😭
17:51 a Wii that still has Internet Channel as a Trial Version… that’s rare.
When it comes to the NES and SNES minis. I think it is a matter of few look in on knowing it can do those save states. This does not discount that it is true that many that bought one of them found they are not as interested in it as they thought they would be, something even more true for ones that would be given up to a Goodwill.
Gat bobble head is from Saints Row. Johnny Gat is a character from that series.
W
@@P5Kapalott Peak pfp
Gat Bobble head or whatever is Johnny Gat from the Saints Row games I'm pretty sure
Lmaooo I really thought you were gonna make the strike!
4:55 i have an xbox that has rgh, on freestyle launcher, you can change the speed of the fan. that may have happened with that one.
13:24 Beats? Nah, that's the Blur logo. Blur was an awesome arcade racer. Check it out if you haven't.
Joey and Bald-e-locks is 100% a Expeditionary Force reference
Check out more old 360's Jacob R! your videos got me into buying and fixing old 360's. i want to find a console with the blades dashboard too man!
I'm going to theorize that PS3's are reset more often because the PS3 was often used to store photos and videos.
I'll let you fill in the blanks there.
4:52 its the red ring of death i think its called
11:14 I was not expecting to see ATLA
i know this would probably only be interesting to a few people, but you should show the system version on the wiis, because that last wii was definitely not the latest version. could also date the console, as if it's not latest (4.3) it might not have been played (or have played games released) past 2010.
Yooo been a big fan since 2019, I remember that game Slender the arrival, it's the second ever slenderman game and takes place after the first one if you're wondering. Slender the arrival was made around 2013 I think. Love your videos dude.
It's just metro v1. It's the first version that came out before the current one came out
18:56 it’s got the old version of Wii Shop Channel!
The quick RROD on the slim was a resistor that was broken, as the thermal stage for the flashing red dot would be normal if it overheated in 12 seconds or so.
The overheating RAM error code is often just 0 ohm resistors that went bad, you can remove them and bridge the pads and you’re off to the races.
I Take Very Good Care Of My Xbox 360 Slim Has Some Minor Damage But Only From Leaning Against The Chair Stool Got Mine From A Car Crash Settlement Back In 2012 When I Was 5
For the second 360 the "xenon" motherboard, it is actually considered as an elpis motherboard now as it was fixed in 09. What makes it an elpis is the gpu, as the board is technically a xenon board and essentially the same other than the gpu which is replaced from the Y1 on the xenons to the Elpis gpu, hence the name.
Happens so much try selling on local market places people mess you about people can't be dealing with that and just give it away
when jacob r uploads its a good day
It's a little thing "gat bobblehead" Avatar item is from a game called saints row 3 I used to have it on my avatar LOL don't know why also to be honest I still play my Xbox 360 daily r.i.p marketplace
i just barely saw the yellow hole. you gotta look closer, but it’s visible 👍 5:37
This is your niche. Good job!! Holy views!!
Something that has caught my attention, is that you never check the mii parade.
Can't wait for Jacob to turn on a console and the avatar has a message saying "if you're reading this then you've found my secret toilet xbox" or something else unhinged like that
Four seasons, no sound o'death.
The System Management Controller (SMC) tracks the eDRAM thermal diode readings from the ANA/HANA. Should the eDRAM's temperature surpass the Trip Temperature set in the SMC Configuration, the SMC will initiate EC_THERMAL mode, and a 0013 error code will appear on the front panel.
Eh...every console I've had and gotten rid of for whatever reason I've made sure to factory reset before I do anything, and your vids show exactly why (not being snarky). I wouldn't want someone taking the console and having access to my account.
Jacob is the master of Xbox passcode cracking
THATS MY MATTE BLACK XBOX!!!!
Bro that first frame of the video looks weird 😳
10:22 lol how dare those ps3 owners responsibly factory reset their ps3s before selling em
Ikr
the GAT bobble head was from one of the saints row games he’s one of the main characters
8:30 he indeed does work at DKOldies 😂😂
That GAT is from Saint's Row and it's an unlockable avatar reward lol.
Real mfs remember the Red Dead redemption Avatar outfits
What is "the texas load"?
The Texas Load I love that intro
Gat bobblehead -> Johnny Gat from saints row.
Him: turns on the xbox
The xbox: 🥵🔥🥵🔥🥵🔥🥵🔥🥵🔥🥵🔥🥵
Just wondering if you need the same power supply that corresponds with the motherboard? Or are they all universal? Like does an early power supply work with a late model motherboard?
I wonder do people ever come across their console in your videos that would be cool lol.
I have a console from a month after launch that seems untouched it still works and still blows out hot air. No signs of tampering. maybe microsoft fixed it at some point but there is no service date on it. but there is a 2011 dashboard it is an NXE Kinect hybrid. so its kind awkward as the OG warranty seal is still there untouched. the warranty seal was never replaced with the newer one. and the console is also very clean. weird huh?
The first Xbox got a NCC logo near the power socket.
Is that from Taiwan,ROC?😮
The Johnny got Bobblehead Is from Saints Row the Third
I have a video suggestion: trying PAL games on an NTSC tv what happens?
Hi! Love ur content keep it up!
I think Goodwill is starting to catch on and see your videos and take the games out of the systems sadly
maybe the data breach of sony made their users a little more cautious giving away stuff with personal details on it
I thought it was sick with the MachineHead DVD in the last one. I guess you listen to some great metal. Do you know nothingface? That's what my sn comes from. Anyway, I love your channel cowboy! Like a ten ton hammer
So i suck at fixing things so could i send my xbox 360 to you and have it fixed (been a fan since the beginning, subscribed during the beginning of the texas load*
EEEEEEEEE!! now that jam is stuck in my head 😂😂
THATS MY TRIAL VERSION OF SLENDER THE ARIVAL
🤨
How’s ya head bro 😂
Jacob am i able to ship you a xbox 360 for you to feature in a video? Id give it to you for free, just curious. Idk yet. Anyways, great video
the profile with the website at 14:02 is disney's toontown, not sure why they linked it...
I GOT YOUR TEXAS LOAD DOWN HERE
Gat is a character from saints row.
i wonder what bro will do when he cant find anymore of these in goodwill 🤔 maybe the people who buy them from him will give them to good will
Summer break for you? Not a chance.
7:40 sUpeR MaRio GalAxY
You won't find one of my old consoles because I still own them all.
That website leads you to the disney store lol
I bought a toilet and found out that it also takes Wii’s
why does my xbox 360 take a few minutes to boot up, also it's really loud
are GC saves stored locally, or memory card only? i assume they are memory card only which is why you don't check
Yup, Gamecube saves are only meant to go on Gamecube memory cards.
I need a dkoldies follow up.
Gat bobble head? I’m pretty sure that’s from the saints row games
I bet Thay love this guy
I’m going to to spend a $1000 dollars
THATS not my ps3 😮😮😮😮😮
boooooo
If you say it is where is the proof?
THATS MY GTA V SAVE FILE FOR XBOX 360😮
Omg my Wii is in the video don’t worry I have another
You forgot to check for Miis. :)
"Why is your dad a fictional character?" 🗣️🔥
Because he works from 05:00 to 22:00 and you never seen him, but you got to go to college thanks to him!
The hole in the wall lmao
Funny you got mario kart when you had a open mario kart case next to the console?