We don't have a good sdwan teacher in India. And here is one teacher who is really good on this topic. I have already done my encor classes online but topics like automation, sdwan, network programmability etc is still not clear. I would have joined pynet training program, if i had known.
Hi Samuel, We have our ENCOR Available for FREE now! If you need it - feel free to ping us on WhatsApp at - wa.link/3uvz5t Or Call/Signal/Viber/Telegram at +91-9821215002
Very informative video. I have issues installing certificates etc. This was issue with time on router and controller. My router clock don't work properly. Every 10 minutes I have to correct clock on router before generating any certificates. Clock Also need to match on controllers as well. I have problem while configuration routers for CA. All problems fixed by Wipe router and re-configuration. All commands in this video work.
Hi I am using router as CA server. Every time i reboot router and router loss configuration related to clock. All other configurations saved. When i reset clock time CA server don't issue certificate anymore because of time change. I tried to configured NTP server in same subnet but that dont work. Any idea what is fix after changing time how to re-activate Ceriticate server. I fixed I found reconfigure CA sever.
Hi Abhijit- I am able to set up the lab with the help of your video. Can you pls share the step how we can install Root-cert-chain from your set up. In your lab root CA will not be pingable from vEdge devices.
Hi Abhijit- Thanks for sharing this video which is helpful to set up the lab. Can you pls share the vmnet port settings as same config doing but vManager eth1 IP is not able to reach form the machine. So what settings should be on vmnic.
Hi! Thanks for reaching out. For the vmnet port settings, you'll need to configure vmnet0 and vmnet1. vmnet0 should be connected to your host machine's network adapter, while vmnet1 should be connected to your VMware lab network. To access the vManager eth1 IP, you'll need to connect vmnet1 to eth1 in the vmnic settings. You can refer to the VMware documentation available on their website or post your question on the VMware forums for further assistance. Hope this helps! Let me know if you have any further questions.
Eve-ng that I have don't support vManage, vBond, vSmart. I did the same thing but when I want to add a node nothing showing. My EVE is Free EVE Community Edition, is the problem because of this edition? If I use EVE pro is gonna this problem solving?
Thanks for your comments @Piyush! These are the few things we keep for our paid courses:)))) If you would like to have a one-to-one discussion with our instructor Abhijit or attend the full training and ask doubts, please feel free to contact us at +91 - 9821215002.
Hi Abhijit, i was trying to configure sd-wan lab on my local machine by following your instrunctions from this video, managed to complete vmange configuration and able to ping it from local machine but unable to open gui in browser, getting error as "vmanage server is not ready or temporarily unavailable". Can you please help to solve this. Thanks
Helpful video. In my case I got two error message while adding the vBond controller from the browser, as 1. "failed to add device /failed to get SSH session". do you have any suggestion & 2. The Certification installation for vManage is a continuous failure as Enterprise Certificate authorization, I've tried both in Win server 2012 and 2016 in EVE-NG . Nothing worked. I'm using the viptela image version 20.3.1. Any Suggestion ?
Thanks for your comments @Neaz! These are the few things we keep for our paid courses:)))) If you would like to have a one-to-one discussion with our instructor Abhijit or attend the full training and ask doubts, please feel free to contact us at +91 - 9821215002.
Great lab, however, I have followed it step by step and while I'm able to show vBond and vSmart having installed certificates, neither show up in the main dashboard and are not in synch. I am using version 20.6.3.
If we have two transport on vedg1 then vedge make 2 control connection with vsmart but make 1 connection with vmange My question is why vedge make 2 control connection with vsmart
Thanks for your comments @Oliver These are the few things we keep for our paid courses:)))) If you would like to have a one-to-one discussion with our instructor Abhijit or attend the full training and ask doubts, please feel free to contact us at +91 - 9821215002.
Anyone else getting the same error message whjen trying to connect to vmanage vmanage upstream connect error or disconnect/reset before headers. reset reason: connection failure
Hi Sir, I have tried this but getting some error Root_CA(config)#crypto pki export PKI pem url flash: % The specified trustpoint is not authenticated (PKI). and also tried to authenticate but no luck could you please help me, I have tried same way which you have done. Root_CA(config)#crypto pki authenticate PKI % You must specify an enrollment URL for this CA before
@Raj Kumar seems your ROOT-CA config is misconfigured. You will have to troubleshoot your crypto PKI server config. You can opt for our SD-wAN training for end to end knowledge.
Hi Deepak, This is a part of our paid training. Training fees inclusive of 120 Hours of Lab access is INR 20,000 but we have discounts going on, you can check out with our team at +91-9821215002 or check details here - bit.ly/2Sh0E0S
🎯➡🖥 Do subscribe and press the 🔔 bell icon to get notifications for all new videos: th-cam.com/channels/_KLsjBOS79nnyjrcfk4D6A.html
sd-wan explanation really good,
Glad you loved it!
Very good video sir
Thanks and welcome
Nice video. i will try to implement this lab.
All the best 👍
Very good! I got my answer how to setup fiber in around 1 hour!
Great to hear that. Always happy to help!!!
We don't have a good sdwan teacher in India. And here is one teacher who is really good on this topic. I have already done my encor classes online but topics like automation, sdwan, network programmability etc is still not clear. I would have joined pynet training program, if i had known.
Hi Samuel, We have our ENCOR Available for FREE now! If you need it - feel free to ping us on WhatsApp at - wa.link/3uvz5t
Or Call/Signal/Viber/Telegram at +91-9821215002
Very informative
Glad it was helpful!
Thanks a lot!
Your Welcome! @shashank bhargava
Very informative video. I have issues installing certificates etc. This was issue with time on router and controller. My router clock don't work properly. Every 10 minutes I have to correct clock on router before generating any certificates. Clock Also need to match on controllers as well. I have problem while configuration routers for CA. All problems fixed by Wipe router and re-configuration. All commands in this video work.
Incredible! Glad to know that this video helped you.
If you are looking for SD-WAN Training, do check out the upcoming batches here - bit.ly/2Sh0E0S
Hi I am using router as CA server. Every time i reboot router and router loss configuration related to clock. All other configurations saved. When i reset clock time CA server don't issue certificate anymore because of time change. I tried to configured NTP server in same subnet but that dont work.
Any idea what is fix after changing time how to re-activate Ceriticate server.
I fixed I found reconfigure CA sever.
Hi Abhijit- I am able to set up the lab with the help of your video. Can you pls share the step how we can install Root-cert-chain from your set up. In your lab root CA will not be pingable from vEdge devices.
Sure, we will take this to Abhijit and will bring the requested topic video over the channel.
Hi Abhijit- Thanks for sharing this video which is helpful to set up the lab. Can you pls share the vmnet port settings as same config doing but vManager eth1 IP is not able to reach form the machine. So what settings should be on vmnic.
Hi! Thanks for reaching out.
For the vmnet port settings, you'll need to configure vmnet0 and vmnet1. vmnet0 should be connected to your host machine's network adapter, while vmnet1 should be connected to your VMware lab network.
To access the vManager eth1 IP, you'll need to connect vmnet1 to eth1 in the vmnic settings. You can refer to the VMware documentation available on their website or post your question on the VMware forums for further assistance.
Hope this helps! Let me know if you have any further questions.
such a wonderfull explanaion the paid udemy guys want to learn from you.
please give some paid courses in udemy as well. Thanks
Thanks a lot! @Nisamudheen Kp
Eve-ng that I have don't support vManage, vBond, vSmart. I did the same thing but when I want to add a node nothing showing.
My EVE is Free EVE Community Edition, is the problem because of this edition?
If I use EVE pro is gonna this problem solving?
Hi sir can you share eve-images with me?
You can check and download EVE-NG images here - bit.ly/3wxsPrh
Will it work in 16gb ram laptop...
Sure. It will work.
not able to download the certificate from tftp, no error displayed as well. Ping connectivity is ok as well.Kindly help
I also have the same problem did you find any solution dheeraj verma?
@@aliattashsaify5400 yes use SCP filename.pem sshname@ip:/home/admin/certificatename.pem
i am also facing the same problem. any solution ?
@@joyantadebnath8603 use scp
Hope everything is clear now!
can we simulate that lab witout having licence file ? having images enough for lab ?
These are the few things we keep for our paid courses:)))) @burak
Please help for MAC Os
It goes the same way. @pravin nichat
HI, I am not getting the interface which is connected with vManage on my laptop, please help
Thanks for your comments @Piyush!
These are the few things we keep for our paid courses:))))
If you would like to have a one-to-one discussion with our instructor Abhijit or attend the full training and ask doubts, please feel free to contact us at +91 - 9821215002.
I am not able to download root-cert-chain via tftp from Root-CA it gives me the error of no directory created
Hi Ali, This is being taught in our Paid Live trainings. If you wish to enroll please connect with us at +91-9821215002
@@PyNetLabs I"ve found it's an issue with the version of SD-Wan controllers once I updated them it worked.
@@inspiringminds7284 Thanks, I will try.
@@inspiringminds7284 which version you are using? i am using 20.3.1
@InspiringMinds which version you are using now, as I have same issue ?
Can we simulate the lab in EVE-NG community edition ?
Yes you can simulate the same @satyam
Hi Abhijit, i was trying to configure sd-wan lab on my local machine by following your instrunctions from this video, managed to complete vmange configuration and able to ping it from local machine but unable to open gui in browser, getting error as "vmanage server is not ready or temporarily unavailable". Can you please help to solve this. Thanks
Glad it helped. But we have more help available for our paid training.
Helpful video. In my case I got two error message while adding the vBond controller from the browser, as 1. "failed to add device /failed to get SSH session". do you have any suggestion & 2. The Certification installation for vManage is a continuous failure as Enterprise Certificate authorization, I've tried both in Win server 2012 and 2016 in EVE-NG . Nothing worked. I'm using the viptela image version 20.3.1. Any Suggestion ?
Thanks for your comments @Neaz!
These are the few things we keep for our paid courses:))))
If you would like to have a one-to-one discussion with our instructor Abhijit or attend the full training and ask doubts, please feel free to contact us at +91 - 9821215002.
if you still in this issue i can have a look.. i am also doing the lab and working fine in my lab. if you need any help let me know
How to add vedge in same lab?
These are the few things we keep for our paid courses:)))) @gaurav
Great lab, however, I have followed it step by step and while I'm able to show vBond and vSmart having installed certificates, neither show up in the main dashboard and are not in synch. I am using version 20.6.3.
Glad it helped. But we have more help available for our paid training.
If we have two transport on vedg1 then vedge make 2 control connection with vsmart but make 1 connection with vmange
My question is why vedge make 2 control connection with vsmart
Glad it helped. But we have more help available for our paid training.
Hello Sir i am using Windows 11 and unable to access Vmanage Through the Web even able to Ping
Thanks for your comments @Oliver
These are the few things we keep for our paid courses:))))
If you would like to have a one-to-one discussion with our instructor Abhijit or attend the full training and ask doubts, please feel free to contact us at +91 - 9821215002.
Anyone else getting the same error message whjen trying to connect to vmanage vmanage upstream connect error or disconnect/reset before headers. reset reason: connection failure
I have problème, when i config vmanage, it Says that the ping is on vpn 0 , so i can't ping the cloud address
yeah even vpn 0 or 512 can not ping
You need to set the cloud address to your home network that is why.
Sorry @Le Lyonnais but we keep that to our paid trainings :)
Hi Sir,
I have tried this but getting some error
Root_CA(config)#crypto pki export PKI pem url flash:
% The specified trustpoint is not authenticated (PKI).
and also tried to authenticate but no luck could you please help me, I have tried same way which you have done.
Root_CA(config)#crypto pki authenticate PKI
% You must specify an enrollment URL for this CA before
@Raj Kumar seems your ROOT-CA config is misconfigured. You will have to troubleshoot your crypto PKI server config.
You can opt for our SD-wAN training for end to end knowledge.
@@PyNetLabs Thanx for reply. now issue has been resolved, but that was due to date and time not configured.
Great!!!
@@shaurya-chn would you please here getting similar error
@shaurya-chn fixed
How to get it free
Hi Deepak, This is a part of our paid training.
Training fees inclusive of 120 Hours of Lab access is INR 20,000 but we have discounts going on, you can check out with our team at +91-9821215002 or check details here - bit.ly/2Sh0E0S