DIY Make Your Own Modern Garden Lights from PVC Pipes
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- hi everyone...
In this video I will make a simple, modern garden lamp from PVC pipes.
this is a simple idea and if friends want to make, this idea can be developed again as needed.
I hope this video is useful. Thank you
#diy #gardenlights #decorationideas
It would make a great wall or fence lamp too but bulb and fitting must be on top to prevent rain water short circuiting. Well done great ideas & craftsmanship. Thank you.
Very nice beautiful sharing masahallah zabardast 👍👍👍
thanks
Luar biasa.....keren bang lampu hias dari pipa nya
makasih bang. sukses selalu
waah baguss lampu tamannya nih dr pipa pvc
makasih bang
Mantap kali kawan
ide yang kreatif,sangat bagus....
terima kasi
keren sangat menginspirasi sekali
terima kasih
gila bagus banget, simpel, elegan, tapi saya lebih suka kalau ditutup pakai plastik buram, jadi kalau ada hewan2 kecil aman gak masuk, hujan aman dan kabel tertutup. jadi lebih keren, btw terimakasih atas inspirasinya. semoga sukses selalu .
Luar biasa....keren, top markotop kawanku. Slmt berkreasi 👍👍👍❤
makasih om
The bottom part is a perfect design to hold rain water causing a short circuit.
Slalu keren
Cakeep 👍👍
Simpel tapi menarik bang.
makasih om
Buat sdri sekeren ini g kalah ama yg bl mahal
terima kasih bunda
joss om... salam sukses selalu om
salam jg maaf baru balas
Muito bom, parabéns.
thanks
Bonjour c'est très bien merci.
I would definitely recommend using 12V lights, not high voltage! People could die.
👍👍❤️❤️🙏🙏🙏
Nice work! What is the glue you are using for your project!
thanks
I would rather run the wire outside on the back. Otherwise put a cover on the front to keep water out and hide the wires inside 🤦🏻♂️
Quiero algo así pero para mí dormitorio,hacen un video
Please make video on sensor lights in garden
Okay. Thank you for the advice
An inexpensive solution to the hot knife for cutting is to purchase a hacksaw blade, a piece of wooden dowel, and a hose clamp. Cut a notch into one end of the dowel. Bend blade back and forth until it breakers at approximate length. Hammer bent end straight. Insert into notch, and fasen with hose clamp. The teeth in the blade and the hose clamp will hold it tight in the notch. Walla!
thanks
What about rain.....
looks like it's safe, at 3:02 - 3:17 the top cover is made 👍
#very professional work, Thanks my friend, Big liked+sub #
thanks
ДОЖДИК, ЛИВЕНЬ....... не, не слышал