According to Tsunami, 32c. Kaya lang depende pa rin sa tire and rim combination. For this particular build, 28c tire lang gamit namin pero lumabas na 29/30mm yung actual width niya dahil sa rim and masikip na sa likod.
Your car is very beautiful. Let me ask 2 questions. Using 700x32c tires will cause the tire casing to touch the fork when moving? Can I use a 31.8mm seatpost clamp on this frame? Thank you❤
Hi Joel! I like your videos and how clearly you explain things when asked questions about your builds. I'm one of those cyclists who think we can all benefit from content like these because we can see how a build turns out before we even start or how parts would look if installed in a build (I pushed through with my 4130 build after watching this video.) I have an idea that I think would work on your channel. You can have some of your friends bikes cleaned/maintained and in return you can create content like these with those bikes. I'm sure that's what waveywheelies does considering the amount of bikes and the condition of the parts in his videos. Wala lang, idea lang hehe cheers brother! Keep at it!
Thank you for the kind words, Sir. Im glad our video inspired you with your own build. We'll take in consideration your suggestion. Whenever we're not building and have some parts lying around, we try to make shorter content out of it for our On Your Bike segment.
Hi Joel, if i used frame from snm4130, what is the maximum tire size i can use? I want to try to make it a daily bicycle that is not only used on asphalt roads
Hi! The manufacturer's stated maximum tire clearance is 32c. However, for this particular build, we used a 28c tire and was left with a few milimeters of clearance. Im guessing it has to do with the tire and rim combo as well (wider rims can yield to wider actual tire size).
Mahirap po ikumpara kasi yung TP HiTen, frame lang binebenta and yung Tsunami 4130 naman po frame and fork. Kadalasan ang pinapares sa TP HiTen is TP Chromoly fork. Kung ganyan pong comparison, yung Tsunami 4130 pa rin po ang mas magaan sa tingin ko. Although negligible ang difference.
@darrenjay2468 34mm po yung sukat bearing cup. 28.6mm or 1 1/8 inch po yung steerer tube. Magka-iba po yang dalawa as you can see. But yes, for the Tsunami 4130 yan po ang dimensions ng headset.
Yeah. I think it only comes in at size 52 and 54, at least here in the Philippines. You can still make it work. Try and play around with you stem length and saddle height. It would be safe to start with replicating your road bike set up.
In this current set-up, no. But I've seen others try. Merong iba, pinapalitan yung fork para walang pedal strike and gumagamit ng BMX stem with riser bar para hindi tumatama sa frame yung cockpit.
Personally, di pa ako nakakabuo ng Level Up GB002. In terms of paper spec, close yung dalawang models. Mas malaki yung maximum tire clearance ng GB002. Based sa experience ko sa Tsunami 4130, hindi ganun ka wide yung gulong na kaya niyang tanggapin. In terms of tubing, pareho naman silang chromoly steel. Mukha lang mas manipis yung tubing profile ng GB002 sa Tsunami 4130. That can mean weight savings. Sa price point, mas mura ng ilang hundreds yung Tsunami 4130. Comparable yung dalawang models. Honestly, kung pang tracklocross, I'll go with the Level GB002.
Hi! Threadless headset and steerer tube po ang Tsunami 4130. Yung stock headset niya is 34mm. 28.6mm po yung clamping ng bullmoose bar (integrated stem and handlebar) sa steerer tube. 100mm po yung effective stem length nitong particular na bar na ginamit sa build na ito.
As a reference point, yes. Pasok ang size 52 sa height na 5'5". Take note lang na iba iba ang katawan ng tao, despite pagkakapareho ng height. You will still need to dial in stem length, seat post offset and saddle position, crank arm length, etc. for a good fit.
We had to swap this seat post out to a different one after we shot this video.
Ilan po ang maximum tire clearance sa likod?
According to Tsunami, 32c. Kaya lang depende pa rin sa tire and rim combination. For this particular build, 28c tire lang gamit namin pero lumabas na 29/30mm yung actual width niya dahil sa rim and masikip na sa likod.
27.2mm seat post and 34mm/34mm headset po
Bought the same frame today from SRSpeed. Also in that sparkle green, looks so nice.
Enjoy and stay safe on the road! ✌🏽
класно вийшло, винос крутий)
i love single/fixed bike, nice work!
Thank you!
What a great bike!
What is the size of the tire?
Thanks! They're 700x28c tires, but the frame can fit up to 32c.
2:28 What's this tool's name? And how can i get it?
whats the size of the seatpost? thank you
This is gonna be so good..
Your car is very beautiful. Let me ask 2 questions. Using 700x32c tires will cause the tire casing to touch the fork when moving? Can I use a 31.8mm seatpost clamp on this frame? Thank you❤
Hi Joel! I like your videos and how clearly you explain things when asked questions about your builds. I'm one of those cyclists who think we can all benefit from content like these because we can see how a build turns out before we even start or how parts would look if installed in a build (I pushed through with my 4130 build after watching this video.) I have an idea that I think would work on your channel. You can have some of your friends bikes cleaned/maintained and in return you can create content like these with those bikes. I'm sure that's what waveywheelies does considering the amount of bikes and the condition of the parts in his videos. Wala lang, idea lang hehe cheers brother! Keep at it!
Thank you for the kind words, Sir. Im glad our video inspired you with your own build. We'll take in consideration your suggestion. Whenever we're not building and have some parts lying around, we try to make shorter content out of it for our On Your Bike segment.
Hi, nice build. how is the Bottom Bracket size?
Thanks! The frame fits a BSA Bottom Bracket (ie. English threaded shell, 68mm width, and 1.37in x 24 TPI inner shell diameter)
@@CustomBuildsYT and the Square taper installed in this video is 110mm?
It's 107.5mm. 110mm might be too long and will affect the chain line.
I love this bike dearly😍
Thanks!
Nice video. Just a quick tip. That pump you have has both Schredar and Presta valves, you don't need an adapter :) Really cool bike build.
Thanks for the tip and the support! I prefer using the Schrader pump head with an adapter becase I tend to bend the core of the Presta valve.
sir whats the maximum tire clearance of that frame. thank you so much!
Hi! Manufacturer spec says its 700x32c. But based on experience, masikip na yung 30c.
Hi Joel, if i used frame from snm4130, what is the maximum tire size i can use? I want to try to make it a daily bicycle that is not only used on asphalt roads
Hi! The manufacturer's stated maximum tire clearance is 32c. However, for this particular build, we used a 28c tire and was left with a few milimeters of clearance. Im guessing it has to do with the tire and rim combo as well (wider rims can yield to wider actual tire size).
Can you remember now - what is the internal width of the rims of your wheels?
@user-jk8or3vx7p It’s probably 19mm
Thank you.
Could you theoretically fit an internal gear hub or a derailluer on this sort of frame?
If the spacing of the rear internal gear hub is 120mm then maybe it could work. Im not sure about fitting a derailluer though.
You could. But should you?
To each their own, I suppose Haha
Steel ba yan or aluminum?
Chromoly steel po
So ayun nagbago na isip ko. Nagtsunami 4130 nalang ako. Hahahhaa
HIII kuys can I ask ano pong size ng tire na kinabit nyo po dyan sa video Kasi balak ko din po magbuild ng pangbike to school ko po
Hello! 700x28c tires yung kinabit sa build na ito.
Flame 🔥
Thanks!
sir ok lang po ba 103 bb sa frame nato gamit ko is skeace na crankset 48t?
What size of square taper bb did u put on ur frame?
We used 107mm square taper for this build.
i think i currently own this build, be it some parts are changed lol!
excuse me, what bb size did u use? 68x000
We used a Neco bottom bracket for this build: 107.5 spindle length
@@CustomBuildsYT thank you so much !
whats the max tire clearance?
Manufacturer spec is 32c. In our experience, it could only fit 28c. It depends on the rim and tire combination also.
hi sir tanong lang kung ok ba yung frame na to pang single speed commuter?
ano po kaya max clearance sa likod if may brake?
thanks po and god bless
Definitely, yes! Max na siguro 28c with brakes.
may i ask the bb lengthy
We used a square taper bottom bracket with a 107.5mm spindle.
Sir magkano po inabot tong build na to?
Php 21k po yung overhead namin for this build. We're currently selling it for Php 17k.
facebook.com/marketplace/item/3004111469904775/
Ano po ang mas mabigat na frameset, considering same size.... tp hiten v2 with tp fork or itong snm4130?
Mahirap po ikumpara kasi yung TP HiTen, frame lang binebenta and yung Tsunami 4130 naman po frame and fork. Kadalasan ang pinapares sa TP HiTen is TP Chromoly fork. Kung ganyan pong comparison, yung Tsunami 4130 pa rin po ang mas magaan sa tingin ko. Although negligible ang difference.
sir anu gamit mo na headset dyan naghahanap ksi ako head set sa tsunami 4130 ko na silver.
Ducas brand na headset ginamit namin sa build na ito. Second hand ko siya nabili noon.
Alam ko may VP or Ardently headset na silver.
@@CustomBuildsYT 34mm 28.6 size no sir sorry newbie lang 😅
@darrenjay2468 34mm po yung sukat bearing cup. 28.6mm or 1 1/8 inch po yung steerer tube. Magka-iba po yang dalawa as you can see.
But yes, for the Tsunami 4130 yan po ang dimensions ng headset.
@@CustomBuildsYT maraming salamat sa info sir
Hello sir can i ask what is the size of your frame and your height
Hi! This is a size 54 frameset.
@@CustomBuildsYT Can i also ask what is your height for guide? cause im gonna get the size 52 one and my height is 5 4 to 5 5
I didn't get to ride it since I built it to sell. Try a size 50 also. The 52 might still be a big for your height.
@@CustomBuildsYT The problem is that i dont see anyone selling a size 50 so 52 is my only bet since the rb im using the toptube of it is 53 cm
Yeah. I think it only comes in at size 52 and 54, at least here in the Philippines. You can still make it work. Try and play around with you stem length and saddle height. It would be safe to start with replicating your road bike set up.
Max tire clearance nong frame sir?
32c lang po ang max clearance according to manufacturer spec.
@@CustomBuildsYT thank you sir
I suggest to ride the bike after every build plss
Thank you for the suggestion. We will take it under consideration.
Sir is this good for freestyle?
In this current set-up, no. But I've seen others try. Merong iba, pinapalitan yung fork para walang pedal strike and gumagamit ng BMX stem with riser bar para hindi tumatama sa frame yung cockpit.
@@CustomBuildsYT pero yung frame pwede po pang freestyle?
Yeah, may nakagawa na ng ganun. Matibaytibay din siya since it chromoly steel.
@@CustomBuildsYT thank you sir
Can it fit a 35 width tyre?
The manufacturer's stated clearance is 700x32c.
@@CustomBuildsYT
Thanks mate! Really appreciate your reply. Stay stoke.
Boss, thoughts nyo po sa Level up gb002? Same lang po ba sya sa tsunami 4130?
Personally, di pa ako nakakabuo ng Level Up GB002. In terms of paper spec, close yung dalawang models. Mas malaki yung maximum tire clearance ng GB002. Based sa experience ko sa Tsunami 4130, hindi ganun ka wide yung gulong na kaya niyang tanggapin. In terms of tubing, pareho naman silang chromoly steel. Mukha lang mas manipis yung tubing profile ng GB002 sa Tsunami 4130. That can mean weight savings. Sa price point, mas mura ng ilang hundreds yung Tsunami 4130. Comparable yung dalawang models. Honestly, kung pang tracklocross, I'll go with the Level GB002.
@@CustomBuildsYT Thank you sir
Kuya Joel anong brand nung bottom bracket mo? Neco??
Josh, tama ka. Neco bottom bracket nga ginamit ko sa build na yan 👍🏽
Hello sir ano recommended mo na size ng snm 4130 sa 173.2 cm / 5'8 na height
Hi Sir! Size 54 will do. Medium ata sa Tsunami 4130 yun.
Angas ng build Sir, Okay lang po ba sya lagyan ng brakes if ever?
Thank you! Yes, may provisions for brakes ang frameset na ito.
@@CustomBuildsYT Thanks po Sir, Dami ko po nakukuha idea sa mga build nyo, mahilig din po kasi ako sa single speed, keep it up po sir, godbless
Salamat po!
sir ano po size gamit nyo tire sa front?
700x28c, front and rear
salamat sir @@CustomBuildsYT
Sir ask ko lang anong size ng stem and yung headset
Hi! Threadless headset and steerer tube po ang Tsunami 4130. Yung stock headset niya is 34mm. 28.6mm po yung clamping ng bullmoose bar (integrated stem and handlebar) sa steerer tube. 100mm po yung effective stem length nitong particular na bar na ginamit sa build na ito.
kaya nya kaya sir 38c sa rear? thanks
Hanggang 32c lang ang max manufacturer spec.
Hm po ba ganyang frameset
goods!
Thank you!
magkano nyo nabili yung bullmoose na bar?
Nabili ko po sa Shopee around Php 2k.
Pwede po ba sa 5’5 tong size medium? Size 52?
As a reference point, yes. Pasok ang size 52 sa height na 5'5". Take note lang na iba iba ang katawan ng tao, despite pagkakapareho ng height. You will still need to dial in stem length, seat post offset and saddle position, crank arm length, etc. for a good fit.
Hm po ganyang build hehe planning to build a fixed gear dn eh hihi
Around Php 21k nagastos namin for this build.
Bro ano and max tyre clearance ng Tsunami 4130?
Hi! Manufacturer spec is 32c max clearance.
sir, pwede po malaman saan nyo po nabili bullmoose handlebar nyo, kung sa online paki drop link po, tia ^^
Na order lang po sa Shopee: shopee.ph/product/344667954/7866728288?smtt=0.68272243-1646309868.9
@@CustomBuildsYT salamat po sir ^^
Ilan kg ng frameset and ilan din kg ng whole bike mo sir?
The claimed weight of the frame set is 2.5 kg. I wasn't able to confirm this. The whole bike, in its current build, is 9.7 kg.
Spec list?
Hi! The spec list is linked in the description.
San po nakakabili ng ganyang rims?
Hi! Sa Upgradicitis Bike Shop sa Taytay ko po nabili yang rim set.
Sir anu size ng medium nyan? Pwde sa 5'9
Hi Sir. 54cm top tube and seat tube. Pasok pa rin naman po for 5'9" na rider.
ピストバイクはアホでも組めるよ👍️
Anong size ng tire? Nakaligtaan ko ata.
700x28c yung nominal size. But actual width pag nakakabit na sa rim is 30mm
@@CustomBuildsYT nice! May nagsasabi kasi na pasok daw slick na 32c. Pero 28c na lang siguro kakabit ko. Buti nakita ko to. Salamat!
According sa spec sheet ng Tsunami, 32c yung max na kaya. But I guess depende pa rin sa ETRTO ng tire.
Yung seatclamp kaya, ano size? Luwag nung seatclamp na nabili ko 31.8mm
Parang 28.6 mm yung diameter ng seat clamp. 27.2 mm yung sukat ng seat post.
Kuys baka may list ka ng full specs
Check the link in the description for the full specs.
Idol ano size ng BB?
Used a 107.5mm-spindle bottom bracket from Neco.
Magkano po ganitong build?
Inabot po ng Php 21k yung cost ng build.
Can you still put dual pivot brake calipers in front using 28c tires in that tsunami fork?
We did not try that but my guess is, it should work
@@CustomBuildsYT thanks man