Free Mods Make A Huge Difference! Top Race TR143-G Huina CY1569 RC Bulldozer.
ฝัง
- เผยแพร่เมื่อ 26 ก.ย. 2024
- Hello TH-cam!
Today's video we are looking at the modification of our Top Race TR143-G 9 channel RC bulldozer. Its basically a direct re-brand of the Huina CY1569 1:16 bulldozer. The standard bulldozer just cant get the traction on loose surfaces to adequately push material round. So today we are going to modify the tracks and add some much needed weight, to hopefully improve the dozer's performance. These almost free Mods Make A Huge Difference!
Link to the Dozer on eBay:
www.ebay.co.uk/itm/334255986513
Link to the glue:
www.ebay.co.uk...
Link to bulldozer:
www.ebay.co.uk...
Banggood Promo Code For RC Parts: BGRCParts8
(This code gives you extra discount on all RC parts)
Link to upgrade servos for Huina Excavator:
uk.banggood.co...
Link to Huina excavator:
www.ebay.co.uk...
Link to newer version of excavator:
uk.banggood.co...
Other RC's you may like:
Link to HBX 901A:
uk.banggood.co...
Link to the Flyhal X04 on Banggood:
uk.banggood.co...
Link to Xinlehong Q902 on Banggood:
uk.banggood.co...
Link to Eachine EAT10 on Banggood:
uk.banggood.co...
/ @theminiatureconstruct...
Thanks a lot for watching, please feel free to comment. Don't forget to subscribe and give the video a thumbs up!
A great improvement in the look of it too, I would do every track pad as look even more realistic…
I thought about it but i wondered if every other link would give more traction?
Great work. Nice improvements. I know they are just small models, but it is nice when they can perform somewhat similar to their full size version. 👍
Yes it turned out quite well. I was genuinely supprised. 👍
for sure disappointing when they're too darn wimpy, this one is FIXED :)
Very nice job on this. Some really simple but effective mods you did here. I think Steve Shen did the track mod on his ripsaw tank. I like your idea of utilizing old windshield wiper bits! I think it worked very well. Great job on this Sir!
👊🏼😊👍🏻
Surprisingly it worked a treat! Cheap too! 👍😅
@@theminiatureconstructionco4556 fit near like made for it really.
I have a WL excavator. I added lead to the inner track assembles.
But also hot glued bb’s in all the limited nooks & crannies of the upper housing.
Big difference!!
It’s almost 15lbs now
and performs way better.
Off topic a bit, but I wouldn’t buy the WL again. It had massive cracks in the main stick out of the box! Really!
I had the seller send me new parts and they cracked in higher stressed areas!
I ended up making my own aluminum
gussets. Time consuming but no more problems.
Btw if your wondering what this 65yr old was doing with the machine. I would scoop dog food from one bowel to another. That’s all! After 30 or 40 battery cycles it hasn’t broke yet😁
I bet your dog loves it! 😅
Love the wiper blade idea!!!
Yes it worked out really well. Another subscriber has said they just turned the tracks inside out. Not sure if that works or not. 👍👍
Thanks for the video, did a similar thing with my dozer, adding fishing sinkers to the inside , will take on the track upgrade as well thanks mate, from Australia 🇦🇺
Yes, I had a mate that used fishing shot and glue to add weight! It worked a treat. Your more than welcome and thanks for watching!
You should of tried flipping the rubber track around, it worked for me top race excavator but it’s still very very cool 😎 🎉
Wow never thought of that, super simple too! :)
Was just thinking that, going to try it.👍👍👍👍
Nice mod thanks for the video looking forward to getting one of these.
For the money they are great. Perform these mods and they do an ok job! 👍😊
Great video, I might actually buy one now. 😂
It's a cheap way in to construction RC. And with a little work you can make a big difference! 👍
oh yeah that really mage a differnts in the way it worked i am wanting to get one an the excvator so thanks for the great video
Yeah its a good mod, couple it with some extra weight and you can do some actual work. Albeit light stuff! 😄
cool mods, the tracks also look better imo.
Yes it does actually now that you mention it! Works a treat! 👍
@@theminiatureconstructionco4556 I have also come up with a mod for the broken excavator thingy,perhaps show you later on.
@@grrfy seen those and usually ouch, for ratchets being too wimpy to dig+move soft dirt.
@@modelnutty6503 its not the ratchet version, its the linear actuator version I have modded👍
@@grrfy the screw driven aren't bad on muscle at all, the bucket can even help pull it up something steep. total toy versions can't compare.
nice upgrade esay an simply...i have a loader am i am looking too get me a dozer...
Nice cheap RC, cant go wrong really.
Gonna do this to mine 👌👍👍😀
Apologies for the late reply. Your comment has only just been shown to me on my notifications. Yes its a good little mod that makes all the difference!
Good Thanks 🙏
Your welcome! 👍
Great Video
Thank you very much! 😄👍
Awesome Fix !!! I wonder why they do not make a metal version because this plastic one does not work good ???
Not sure. They do with the excavators!
hello thank you for your video I am waiting for this little bulldozer and I will do as you modify thank you
Hello! Yes it's well worth doing. As it makes a decent difference. Thank you for watching and please subscribe if you haven't already.👍👍
Hi buddy I like your work have you done a upgrade on the battery 🔋 I have done the blade and that's great cuts great now but battery does not last long 😮💨cheers Shaun 👍
Hello Shaun thank you very much! I've not updated the battery yet. It's finding space on the dozer is the problem. 👍👍
Hi was thinking if you could have like a extension line wires to plug it in to on the old battery box and run them under the bely of the dozer to the rippers at the back and place the new battery on top of the roof or the ripper area 🤔and you could disconnect from there
@@shaungwatkin1638 that sounds like a plan. I wonder if anyone does a higher capacity battery of the same size. WPL battery's are the same size but you would have to change the connector. 👍👍
Good Analysis, its a smaller model than I thought. It has to have more weight and better tracks and weight to move earth around and rocks will be a problem also...
The mods make a decent difference. 👍
Very nice video. Is there an RC scraper as well in this scale?
I don't think so, but there should be!!!! :}
Have you seen the military "camo" version ?? Aaaaaaaasum and coooooooooooooooooool ! love the bulldozer vids , just finished my Heng Long Bulldog .
I haven't mate no. Glad you're enjoying the videos though! 👍👍
Do you have any long term insight into the lifetime of the motors?
@dacooter so far so good. 👍
I'm buying one. What kind of plastic strips are you installing on the tracks? I see they are soft.
@@AaAa-iz3cp windscreen wiper blades.
Thank you. I don’t understand English. I have already purchased one and am going to modify it like this.@@theminiatureconstructionco4556
@@AaAa-iz3cp good luck!!
Is there any upgrades for the drive motors?
Don't think so unless larger motors can be fitted. They have slipper clutches in to prevent damage if too much strain is applied. Must admit so far I've not hadcan issue with the standard units. But I do tent to pick scale appropriate material to move around. 👍
I might have missed it but How much weight sid you end up adding?
@@drzflyest4 I think as much as I could fit in the body without it interfering with anything. Sorry I couldn't be more specific.
Hello, whats the different betwen huina 1569 and1554 . Can i an 1554 Drive Witz 7,4 v ?
I hop you Fan help me . Thank you. Sorry for my bad english
Don't apologise! The difference is the voltage. I don't know if they are interchangeable? So be cautious.
@@theminiatureconstructionco4556 thank you
@@Spitzer-i8q your welcome
Would you consider putting metal tracks on it?
Do they do them? 😀👍
slanted blade or snow blower attachment? either way it'd clear freshly fallen snow.
Hahahaha sounds like a plan, more fun than a shovel! 👍
@@theminiatureconstructionco4556 foam block and aluminum flashing would be easy to make a clip on slanted blade. more fun than a crawler with a lawn mowing boom stuck on it.. seen done with a 390 motor and weed-eater trimming line.
After watching this video I got myself one lol
Happy bulldozing! 😄👍
Which had more of a impact, the weight or the extra traction? I wonder if you would have noticed a difference with just one of the upgrades?
I think they both go hand in hand. Both done together probably equals a better result. 😀👍
Where did you get the little grousers (track extensions) for the tracks?
1:10 got them free from a local motor factors. They were second hand. 👍😉
Hello 😊what lipo are in the dozer? 2 s or 3,7 volt?
2S but there is also a 1S version as aswell i believe.
My have ä 1s lion Akku, can i a 2s lipo drive?
@@heliflyer111 not sure, you could damage the board.
briefly had a 2 s lipo on it and it went so far 🤔
this model huina 1554?
Hello. Sorry for the late reply. Yes its known as both the 1569 and the 1554? Weird??? :)
hidraulic or mecanic
@@LuxWacht it's mechanical 👍
What did you mean demonetized? Why?
I accidentally said rubber 'cuntent' instead of content! It was just a little joke really because there's an anti swearing waver in the monetisation rules. Just trying to be funny. 👍
@@theminiatureconstructionco4556 🤣🤣🤣
Is it holding on?
So far yes. It doesn't have a hard life though. :)
Nice vid; I did the same thing when the bulldozer first came out and I also modded the blade to dig down deeper; I then compared it to a stock item out of the box and the difference was extraordinary.
Yes, some small changes make all the difference! 😄👋
works very well, do you think it will match in scale with the WPL B series???
🔵🔵🔵👍👍👍😀😀😀🔵🔵🔵
Now you're asking. I personally think its actual scale is about 1.22 / 24. They quote 1:16 but that's just nonsense! 👍
the "mini D12" might be about the right size next to it.
@@modelnutty6503 that's a good point. 👍