@@spnfirearmsThe trigger assembly is a stock 43x trigger assembly. I only switched the trigger shoe on my Sct 43sc frame to a Shadow Systems Cr920 trigger shoe. It’s perfect after that.
I’d probably buy two. I’ve developed arthritis in my hands and wrists so the .380 is a lot easier on me. I’ve spent the last year selling my guns and transitioning to nothing but .380 in the safe. I do have a 57 pistol and it shoots like a dream but way too big for edc. I recently bought the Glock 25 and paired it with an mck, it’s pretty sweet. Got me to wondering if I could drop my Glock 25 internals into the sct19 frame and it function? The 25 is just a 19 chambered in .380. I think it would work
@@jerroddooley374 I have mck too. I'm thinking about getting Flux Raider. Yeah, I'd buy 2 of those glocks as well. One to train massive round count, one to carry.
I bought 2 of the stripped sct 43 frames, I absolutely love the feel. Destroys glock and micro dagger out the gate. If you bought complete frame it has oem glock parts except the mag release that's their own
My Glock 42 FINALLY runs flawlessly so now I LOVE IT! I was so bummed and upset when I had constant malfunctions out of the box. Even after sending it in and getting it back from Glock I still had issues. Apparently it needed a “break in” because it’s now been malfunction free over the last 300+ rounds. Now I just need to find the time to put on my handle it edge grips and then get some new metal night sights
I just bought the frame for a G19 and got the guts separately. I automatically get a Johnny Glock combat trigger for all my glocks so no need in buying the frame already kitted out. Get a Johnny Glock and extended controls and then you got one helluva a freedom launcher! The 43x Johnny Glock trigger is the best upgrade you can ever invest in. It’s the biggest change in any Glock platform. I have not tried out the 4311 yet. I plan to give that a try after the newness wears off and are in stock more consistently.
I have a Anderson Kiger 9c as my CCW. Anderson made the Kiger with a SCT Frame. Even though it is a Glock 19 Gen 3 Clone I agree with everything you say on the SCT Frames. I do plan on possibly getting a PSA Dagger upper with the SCT frame either from Anderson or SCT themselves. All in all to me worth every penny.
Hey brother grab the micro dagger lower and do a comparison please! I’ve got the micro dag and have been debating on ordering one of these lowers to swap but need a comparison from someone I trust!
I have a shadow cr920p and wasn't the biggest fan of the lower. I purchased the micro dagger and sct lower to see which I preferred. The sct is better. My only issue with it was the notch at the front of the trigger guard. It wouldn't fit in some of the holsters I already own.
I bought mine about 2 months ago and threw on a micro dagger slide, a Johnny Glock flat faced shoe, and a micro dagger mag, and its rendered my G26 to home defense duty. That hole at the back is for a Magwell that is forthcoming.
@@Johnsantana718 Mission First Tactical minimalist IWB holster. Fits good out of the package but I used a heat gun to just slightly form it a tad better as it was just a bit too snug to the gun for my liking
I have two of these. They need some hand tuning. I’ve noticed that the rails are set about 1/2mm taller than an OEM Glock 43x frame. This was causing an issue with the connector not reliably resetting the trigger. Near 100% failure rate on one frame and about 1 in 20 on the second frame. Had to bend the connector ear upwards and the entire connector bar to the right hand side of the frame. Works 100% so far, but want to run another 200 rounds through each before I call it good.
Hey man LOVE your videos, been subscribed for a while now. Do you think you can make a top 3 favorite pistols with an in depth explanation on them? Thanks man!
I sold my hellcat pro and got a mp 2 compact 9mm. Absolutely best compact 9mm I've ever had man. That said I also have a g43x which I'd put right next to it. Also I appreciate you keeping your nails trimmed. 90 percent of gun vids showing only hands they have hawk talons they could catch rabbits with for fingernails.
I bought mine at Brownells, I got the green one, building it now. I like the fact it doesn't have that rounded backstrap of the glock. Its my new glock, to bad glock can't make a simular type frame, they'd sell hundred of thousands of these. Glock factory frames really suck. But so much for Glock really listening to Americans wanting a 1911 style frame, the SCT frame makes for a better frame for me, sorry glock, move over for SCT & the Grit Grips frames. Your loss will be both be their gains, to many after market frames to work with, than stick with the ill fitting glock frames.
My Son bought one that this was trash the back plate would come off, a lot of feed issues he re turned got a Sig p365x with 17 round magazine that is a nice shooter very lil recoil, with nice trigger !
@@tune1398 In between the 2 times it was sent back to SS yeah it was rock solid. My extractor channel "needed recut" the first time. And my extractor curiously broke right at 1100 rds.... I'm going to eventually buy a Glock brand slide I'm done with this thing lol
Almost won a really cheap set of G42 parts (parts kit) that I really wanted to get for a friend of mine. Was going to design a G42 frame that he could print that would allow him to use LCP Max magazines in it. Would have been an awesome build.
The texturing looks like the texturing they put on 3d printed frame designs. Never thought it looks nice... but it works good. It's not easy to print stippling or to come up with any stippling that actually works, so lines and grooves are fairly common in 3d printed frame designs.
Any experience with Rival Arms barrels? I’m debating between a Rival Arms or True Precision barrel for my Glock 43X build (with SCT frame.) I trust you more than any others so that’s why I’m asking you
Yes I have ran rival arms parts and barrels. I think my true precision barrel is one of my best aftermarket barrels. Nothing wrong with the rival arms, they are quality but I do love my true precision.. respect
I picked a SCT 43x recently, any recommendations on completed uppers? Other than PSA ( plan on getting a micro dagger separately when real sales are back)
I'm gonna get one of these. I can afford it ❤😂 was this the complete lower or stripped lower? Ive had bad luck with p80 lower parts kits so Im considering the complete lower vs the stripped. I want to see you run this relentlessly the 1000+ plus rounds you were talking about ❤. I want to see these in action.
My pf9ss came out shitty so this will be a redemption for that. I want a quality upper though tbh before I give up on that pf9ss. I got a Patmos upper complete garbage.......
I have the SCT 19 frame and it's pretty boxy when holding it but it feels great when shooting it. I wonder if this frame has the same boxy feeling. I got 4 frames I gotta finish building!!! Fighting not to buy this one 😂😂😂
It's too bad I wouldn't be able to feel the texturing. My fingers are messed up over all my careers in construction and landscaping. I tend to just slap Hogue rubber grips on all my pistols, since at least I can sense the stickiness of the grip in my hand.
No they aren’t. Read the description. It’s some oem parts the rest their parts. It’s all in the description. Just look at the parts and you’ll see very few are oem Glock parts. I do this for a living my man……..
@@adamtimmins3035 I could if I knew what a SCT43 was or that it was the upgrade in question. People name videos all sort of odd ways...for all I knew when I clicked on it, that could be a catalog number for his videos...
Ergonomics are one of the most important parts to shooting, establishing a good draw, a good shooting style etc. grips are worth it and this frame most definitely is. If you ever go out and try it, let me know how it feels. Respect
@@Ape76you sound really silly. We’re obviously talking about a build from scratch. Not what a single person has laying around. Nobody said it was better. Only it was a good deal. I guess the sky is teal and not blue huh?
I think the act frame uses oem Glock parts
If that’s the case then it’s the best value out!!!! Haven’t stripped it yet but the slide stop doesn’t look oem nor does the locking block
I just checked. It’s not all Glock oem parts. It’s a mixture of oem and sct parts…
@@spnfirearmsThe trigger assembly is a stock 43x trigger assembly. I only switched the trigger shoe on my Sct 43sc frame to a Shadow Systems Cr920 trigger shoe. It’s perfect after that.
@@copper178 great choices! Respect!
Even with some oem parts, it’s the best value out… respect guys
Absolutely 42x Max. If they gave me 10+1, a rail, and TFO sights, I'd pay $600 immediately. At $650 I'd think about it for 2.4 seconds, then get it.
I’d probably buy two. I’ve developed arthritis in my hands and wrists so the .380 is a lot easier on me. I’ve spent the last year selling my guns and transitioning to nothing but .380 in the safe. I do have a 57 pistol and it shoots like a dream but way too big for edc. I recently bought the Glock 25 and paired it with an mck, it’s pretty sweet. Got me to wondering if I could drop my Glock 25 internals into the sct19 frame and it function? The 25 is just a 19 chambered in .380. I think it would work
@@jerroddooley374 I have mck too. I'm thinking about getting Flux Raider. Yeah, I'd buy 2 of those glocks as well. One to train massive round count, one to carry.
I completely agree
I agree about the 42. It is actually my primary edc. If they ever release a 42x, I’m buying!
👍🏻💯
I bought 2 of the stripped sct 43 frames, I absolutely love the feel. Destroys glock and micro dagger out the gate. If you bought complete frame it has oem glock parts except the mag release that's their own
PSA should make a 10 round flush mag for the G42!
My Glock 42 FINALLY runs flawlessly so now I LOVE IT! I was so bummed and upset when I had constant malfunctions out of the box. Even after sending it in and getting it back from Glock I still had issues. Apparently it needed a “break in” because it’s now been malfunction free over the last 300+ rounds. Now I just need to find the time to put on my handle it edge grips and then get some new metal night sights
I just bought the frame for a G19 and got the guts separately. I automatically get a Johnny Glock combat trigger for all my glocks so no need in buying the frame already kitted out. Get a Johnny Glock and extended controls and then you got one helluva a freedom launcher! The 43x Johnny Glock trigger is the best upgrade you can ever invest in. It’s the biggest change in any Glock platform. I have not tried out the 4311 yet. I plan to give that a try after the newness wears off and are in stock more consistently.
I agree very much about wanting a Glock 42 "max"...I have the Ruger LCP Max, but, you cant beat a Glock. I'd have to get one.
I have a Anderson Kiger 9c as my CCW. Anderson made the Kiger with a SCT Frame. Even though it is a Glock 19 Gen 3 Clone I agree with everything you say on the SCT Frames. I do plan on possibly getting a PSA Dagger upper with the SCT frame either from Anderson or SCT themselves.
All in all to me worth every penny.
The SCT frames are great. I believe that they install OEM glock parts. Check out the serial numbers on the crucifix
They aren’t all oem. It’s a mix of sct and Glock oem parts! But Still a great deal none the less!
Hey brother grab the micro dagger lower and do a comparison please! I’ve got the micro dag and have been debating on ordering one of these lowers to swap but need a comparison from someone I trust!
Sounds good man, I got you! This thing is the real deal… they were spot on with it! I got you. Respect
I have a shadow cr920p and wasn't the biggest fan of the lower. I purchased the micro dagger and sct lower to see which I preferred. The sct is better. My only issue with it was the notch at the front of the trigger guard. It wouldn't fit in some of the holsters I already own.
Glock 48 is the one I’ve been eyeing for EDC. I think it’s a perfect size and with some PSA mags I couldn’t ask for more.
I bought mine about 2 months ago and threw on a micro dagger slide, a Johnny Glock flat faced shoe, and a micro dagger mag, and its rendered my G26 to home defense duty. That hole at the back is for a Magwell that is forthcoming.
How is the fitment with the dagger slide? Has it been reliable?
@@Johnsantana718 100%. Fits and runs perfect
@@GlennFricke good to hear, what holster are you running for that set up?
@@Johnsantana718 Mission First Tactical minimalist IWB holster. Fits good out of the package but I used a heat gun to just slightly form it a tad better as it was just a bit too snug to the gun for my liking
I have two of these. They need some hand tuning. I’ve noticed that the rails are set about 1/2mm taller than an OEM Glock 43x frame. This was causing an issue with the connector not reliably resetting the trigger. Near 100% failure rate on one frame and about 1 in 20 on the second frame. Had to bend the connector ear upwards and the entire connector bar to the right hand side of the frame. Works 100% so far, but want to run another 200 rounds through each before I call it good.
That grip frame looks great
It’s just perfect honestly. Respect and thanks for watching
You are a wonderful person and have the heart of a True American. Amen brother.
I have the same lower I own multiple glocks, but this frame is outstanding and very very light
It’s a great frame and if you put a micro dagger C1 slide from PSA it’s gonna shoot even better
Hey man LOVE your videos, been subscribed for a while now. Do you think you can make a top 3 favorite pistols with an in depth explanation on them? Thanks man!
I sold my hellcat pro and got a mp 2 compact 9mm. Absolutely best compact 9mm I've ever had man. That said I also have a g43x which I'd put right next to it. Also I appreciate you keeping your nails trimmed. 90 percent of gun vids showing only hands they have hawk talons they could catch rabbits with for fingernails.
The m&P 2.0 compact ? Not the shield?
@@juanrojas6805 i have the shield plus as well
I bought mine at Brownells, I got the green one, building it now. I like the fact it doesn't have that rounded backstrap of the glock. Its my new glock, to bad glock can't make a simular type frame, they'd sell hundred of thousands of these. Glock factory frames really suck. But so much for Glock really listening to Americans wanting a 1911 style frame, the SCT frame makes for a better frame for me, sorry glock, move over for SCT & the Grit Grips frames. Your loss will be both be their gains, to many after market frames to work with, than stick with the ill fitting glock frames.
Just bought two of them!!
Same
That texturing looks like what’s on my PSA Dagger grip panel.
I mated this with a custom Zafari slide. now I got 2 43x's lol
holster compatibility?
Love my SCT also. Great at managing recoil. One of my best pistols
My Son bought one that this was trash the back plate would come off, a lot of feed issues he re turned got a Sig p365x with 17 round magazine that is a nice shooter very lil recoil, with nice trigger !
I love this frame better than Glock 43 mos and psa mirco dagger
It’s a great frame! I don’t have the micro dagger yet but I can already tell this one’s a winner. Respect!
Micro has better ergos but it's as slippy as Glocks frame. Back to carrying my cr920 saving for the sct frame.
@@andrewcramer7214Has your CR920 been reliable?
@@tune1398 In between the 2 times it was sent back to SS yeah it was rock solid. My extractor channel "needed recut" the first time. And my extractor curiously broke right at 1100 rds.... I'm going to eventually buy a Glock brand slide I'm done with this thing lol
Love my 43x mos even though I’m stock everything
Body guard 2.0, you were right😊
I gotta get one of these for my G43, don’t I?
Please keep us posted on this, and what magazines are most reliable.
Is that front sight tritium? Cool on the metal rear glock sight.
Yes! A metal rear Glock sight from
Glock with a Meprolight front dot. An awesome sight picture!
Almost won a really cheap set of G42 parts (parts kit) that I really wanted to get for a friend of mine. Was going to design a G42 frame that he could print that would allow him to use LCP Max magazines in it. Would have been an awesome build.
The texturing looks like the texturing they put on 3d printed frame designs. Never thought it looks nice... but it works good. It's not easy to print stippling or to come up with any stippling that actually works, so lines and grooves are fairly common in 3d printed frame designs.
Holster recommendation? The G43X Holster is so tight
They are in stock and on sale at Brownells for $54.99, I ordered the 17, 19 & 43x frame! Hands down the best ergonomics after Grit Grips frame!
I would love a 42x
Great video! What about holsters?
Well I’m convinced. I need a 42 and a SCT 43x 😮💨
Stuck between this and the micro dagger…i mean, ima end up with both but which one first
Sct frame I have both the Sct 43 using oem for now so get now
Was sooooooooo close to buy the Sct frame the other day.
It’s worth it! Respect
@spn not 110% sure but I think the majority of the lower parts kit in those are already oem!
I can’t remember the name of the company, but there’s a company that is making an alloy frame with Colt grip angle for Glocks. that I might consider.
Where do we get one? Do you want to put a link? This looks great!
Love your videos.
What slides do you recommend for a 43x?
Kaplun manufacturing, Suarez international
Check out my SCT 17 and SCT 26L build! Love these frames!
Subbed! Clean builds! Cant wait for mine to come in!
Looks like a good frame for the Arc Division Reactor48 barrel & slide.
If only I had $800 to upgrade my $485 pistol! 💸
Ahhh yes the SCT... still no magwells for the SCT17 OR the 43
Yessir! Love it! Respect
It has a all Glock oem lpk in it already. I love it so much I bought 2
No sir it doesn’t! It’s a mixture of sct parts and oem parts. I just checked their website and stripped it.
Respect! I would swap out the non oem parts. The locking block doesn’t look as well made either
Does this finally overthrow the Glock 26?
Luv me some SCT frames and just picked 2 FDE stripped frames. Hopefully they have magwells for the 43x frame coming out.
Get the frame only no parts they are trash my son bought the complete 43 they offer back plate comes off, lot of feed issues,
@@Stingyduce that's how I get them...all Naked!
SPN Firearms you did a video a while back about Glock 43X slides. What was the name of company you recommended?
As long as that trigger is better than glock's 43x I'd do it. Mines horrible compared to a cheap Ruger
Any experience with Rival Arms barrels? I’m debating between a Rival Arms or True Precision barrel for my Glock 43X build (with SCT frame.) I trust you more than any others so that’s why I’m asking you
Yes I have ran rival arms parts and barrels. I think my true precision barrel is one of my best aftermarket barrels. Nothing wrong with the rival arms, they are quality but I do love my true precision.. respect
Thinking about buying one of these lowers but I already have a shield plus.. Hmmm
U need to get the PSA micro, its an awesome gun.
What holsters accept this frame
I picked a SCT 43x recently, any recommendations on completed uppers? Other than PSA ( plan on getting a micro dagger separately when real sales are back)
I'm gonna get one of these. I can afford it ❤😂 was this the complete lower or stripped lower? Ive had bad luck with p80 lower parts kits so Im considering the complete lower vs the stripped. I want to see you run this relentlessly the 1000+ plus rounds you were talking about ❤. I want to see these in action.
My pf9ss came out shitty so this will be a redemption for that. I want a quality upper though tbh before I give up on that pf9ss. I got a Patmos upper complete garbage.......
I have the SCT 19 frame and it's pretty boxy when holding it but it feels great when shooting it. I wonder if this frame has the same boxy feeling.
I got 4 frames I gotta finish building!!! Fighting not to buy this one 😂😂😂
Going to replace the internal lower kit but dislike the glock OEM trigger. What are you folks using out there?
Can I use my Glock 43X tango down Vickers extended slide release with this grip module
Does the SCT frames use Glock 15rd mags?
I have a little bit of "wiggle" or "play" at front of frame/slide when I put factory 43 slide on
I don’t see the point in the 42 with the 43 being an option
Will this frame have any issues fitting in standard glock 43x holsters?
It's too bad I wouldn't be able to feel the texturing.
My fingers are messed up over all my careers in construction and landscaping.
I tend to just slap Hogue rubber grips on all my pistols, since at least I can sense the stickiness of the grip in my hand.
I don’t think Glock will. They’ve shown they don’t listen to customers. Hopefully PSA or SCT will step up
Question does these frames still fit in the holster ?
Will it work with any 43x holster? Please tell me it does
Is this frame compatible with all 43/43x holsters ?
Can you use the PSA micro dagger slide?
Yessir!
SCT 43SC frames hace Glock oem internals
No, it’s a mixture of oem and sct internals. I read the description and stripped it as well
@@spnfirearms correct it *has Glock oem part, not all internal parts are oem, only a few really to change out for oem if you want
what holsters do these fit?
Get a shield mag and it will hold 15 rounds ❤ and still be flush
Good post 👍 🎯🗽🔫🇺🇸
The internals are oem Glock
No they aren’t. Read the description. It’s some oem parts the rest their parts. It’s all in the description. Just look at the parts and you’ll see very few are oem Glock parts. I do this for a living my man……..
I would like a 42x
Sold!
Help with this one guys, what is this, ill watch the vid again in the morning. Sct 43 frame, then...z
Nm ill watch again with pen and pad. 😅
Who makes compatible holsters????
That’s the question
looks 3d print3d
I’m the one holding it and it’s great quality… not 3D printed.
Might have helped to explain what that lower is or where to get it...or am I supposed to glean that from other people's comments?
I said the name multiple times… the sct43 my man
Couldn't you just read the title of the video and use Google?😂
@@adamtimmins3035 I could if I knew what a SCT43 was or that it was the upgrade in question. People name videos all sort of odd ways...for all I knew when I clicked on it, that could be a catalog number for his videos...
It’s all good my man, I’ll do better next time
To bad its not 5th gen compatable.
a lanyard loop? lol....
Not worth $100 just for the grips, hell no😂
It’s the whole frame……?
Ergonomics are one of the most important parts to shooting, establishing a good draw, a good shooting style etc. grips are worth it and this frame most definitely is. If you ever go out and try it, let me know how it feels. Respect
For a complete lower frame for a build it is most definitely worth it!
@@dylanammons1952 no it’s not when you already have excellent Glock lower to replace it with untested third party “better” lower 😂😂😂
@@Ape76you sound really silly. We’re obviously talking about a build from scratch. Not what a single person has laying around. Nobody said it was better. Only it was a good deal. I guess the sky is teal and not blue huh?
First here
I appreciate that greatly man! Respect
Your welcome bro