OSHA SCAFFOLDING TRAINING||SYLLABUS||SCAFFOLDING INSPECTOR TRAINING||29 CFR 1926 SUB PART-L

TOPIC- OSHA SCAFFOLDING TRAINING SYLLABUS
Certified Competent Scaffolding Inspector Training- 4DAYS
* Introduction to Scaffolding
*Various types of Scaffoldings
*Scaffold hazards and control measures
*HAZARD: Something with the potential to cause harm may be Physical, Chemical, Biological, and Ergonomics & Psychological.
*Falls from Height
*Falling Objects
*Structural Failure
*Collapses
*Electrical Hazards
*Weather Conditions
*Inadequate Training
*Chemical Exposure and fire hazards
*Unsafe ladders access
*Climbing on scaffolding. *Overloading
*General safety requirements (foundations, fall protection, platforms, etc.)
Foundations:
Solid Ground
Base Plates
Unstable Surfaces
Fall Protection:
Guardrails
Midrails and Toeboards
Personal Fall Arrest Systems (PFAS): Use PFAS, including full-body harnesses, lanyards, and anchor points, when working on scaffolds over 10 feet high.
Platforms:
Material: Scaffold platforms should be made of planking designed for scaffold use, typically wood, aluminium, or steel.
Strength: Platforms must be able to support at least four times the intended load without failure.
Gaps: No more than 1-inch gaps between planks, and platforms should be tightly planked.
Overlap: Ensure plank overlap of at least 12 inches for platforms with multiple planks.
Access:
Ladders
Spacing
Secure Attachment
Erection and Dismantling:
Competent Persons
Manufacturer Guidelines
Stability Checks
Capacity and Load Handling:
Load Limits.
Material Handling
Overhead Hazards:
Clearance
Guarding and Inspection:
Inspections.
Guarding Openings
Weather Conditions:
Wind Conditions:
Slippery Conditions
Training:
Competency
*Accepted international AND LOCAL CODE
*INDIAN STANDARD-IS 3696:1987 -SAFETY CODE FOR SCAFFOLDS & LADDERS
*BRITISH STANDARD-BS 12810-11-SPECIFICATION FOR METAL SCAFFOLD, FABRICATED SCAFFOLD
*OSHA 29 CFR1926-SUBPART -L-COMPLETE GUIDE FOR FRAME FABRICATED, SYSTEM SCAFFOLD & TUBE FITTING SCAFFOLD
*Step by step assembly procedures
Site Assessment and Planning
Inspect the Site.
Plan the Layout
Safety Measures
Laying the Base
Building the Frame
Bracing.
Level and Square
Decking
Access
Safety Features
Check the Scaffold
Tagging and Signage
Daily Inspections
Alterations
*Inspection of completed Scaffoldings
Pre-Inspection Preparation:.
Initial Check
Base and Foundation
Frame and Structure
Verify the scaffold is plumb and square, with proper bracing to prevent swaying or collapse
Platforms
Guardrail Systems
Access
Tying and Anchoring
Electrical Hazards
Inspection Documentation
*Planning a Scaffolding job
Assessment of Needsof Work
Site Evaluation
Design and Load Requirements
Safety Measures
Regulatory Compliance
Material and Equipment
Workforce Training
Erection and Dismantling Plan
*Emergency and Rescue Plan
Emergency Procedures: Develop and communicate plans for emergencies, including rescue procedures for falls or scaffold failures.
* Inspection and Maintenance
Pre-Use Inspection: Conduct inspections before each work shift and after any event that could affect the scaffold’s structural integrity.
Maintenance: Regularly maintain and repair scaffolding components as needed.
*Documentation
Records: Keep detailed records of inspections, maintenance, and training for accountability and compliance.
18. Design and drawing of Scaffoldings
All scaffolds over 125' in height must be designed by an Engineer
Material Calculation
Measurements and Design:
1. Scaffold Components:
2. Calculate Vertical Components:
3. Calculate Horizontal Components:
4. Diagonal Braces:
5. Boards/Planks:
6. Base Plates:
7. Couplers:
8. Add Safety Features:
9. Consider Waste Factor:
10. Consult Scaffold Design Codes:
11. Software Tools:
*Calculation of Loading
Rated Load Intended Load
Capacity
Light-duty • 25 pounds per square foot applied uniformly over the entire span area. 3.0*1.2
Medium-duty • 50 pounds per square foot applied uniformly over the entire span area. 2.4*1.2
Heavy-duty • 75 pounds per square foot applied uniformly over the entire span area. 1.8*1.2
*Review of previous material
*Test
OSHA SCAFFOLDING TRAINING
OSHA SCAFFOLDING INSPECTOR TRAINING
OSHA SCAFFOLDING COMPETENT PERSON TRAINING
29 CFR 1926 SUB PART-L
OSHA SCAFFOLDING STANDARD
OSHA SCAFFOLDING RULES AND REGULATIONS
#scaffolding #inspector #training

[@RamjeeKumar-ez3tw]

Very good sir

[@ATOZSCAFFOLDINGSOLUTIONS]

Thanks for your valuable feedback Ramjeet kumar 🙏

[@ramawdheshyadav88]

Nice sir

[@ATOZSCAFFOLDINGSOLUTIONS]

Thanks for your valuable feedback 🙏

[@mdahsanullah5335]

Sir.. Work at height regulations 2005...ke upar ek complete vedio banaye 🙏plzz

[@munnakumar-zq1vn]

Namskar sir

[@ATOZSCAFFOLDINGSOLUTIONS]

Please send me your contact number on [e-mail]

[@munnakumar-zq1vn]

Sir aap se bat ho sakti hai kya

[@ATOZSCAFFOLDINGSOLUTIONS]

Please send me your contact number on [e-mail]

[@vishalsalunkhe7868]

​@@ATOZSCAFFOLDINGSOLUTIONS hi Sir I m Vishal. I want scaffolding training certification. Please guide me. I am from pune

[@ATOZSCAFFOLDINGSOLUTIONS]

Send me your contact number on [e-mail]

[@user-xj4xb6mm6h]

@@ATOZSCAFFOLDINGSOLUTIONS sir i m waiting your reply in gmail

[@uditkumar2484]

Osha standard ka all load capacity list bhej sakte hai

[@ATOZSCAFFOLDINGSOLUTIONS]

Please send your Mail ID

[@arunjaiswal1682]

I need too.
[e-mail]