Thank you so much for this video. I needed to get that top panel out cuz I have a horrible rattle under there I thought I was going to have to take the whole dash apart first. But not after watching this thank you
Question! I am gonna have to remove my dash in order to access and replace my actuator on my Jeep Liberty 2004. how easy or hard is it to get into that area without having to trigger the airbags? trying to save the money in labor if possible especially If it's a manageable job
Here is what I bought. I had to hard wire (no harness) Powerbass 2.75" Dash Speakers 1999-2005 Fits Jeep... www.amazon.com/dp/B00INA9LRM/ref=cm_sw_r_sms_api_glt_fabc_DMQ44GH1K69E49W6HTXQ?_encoding=UTF8&psc=1
Here is what I bought. I had to hard wire (no harness) Powerbass 2.75" Dash Speakers 1999-2005 Fits Jeep... www.amazon.com/dp/B00INA9LRM/ref=cm_sw_r_sms_api_glt_fabc_DMQ44GH1K69E49W6HTXQ?_encoding=UTF8&psc=1
I put in 2.75” tweeters from Amazon. I had to cut out the old ones and hardwire the new ones. Powerbass 2.75" Dash Speakers 1999-2005 Fits Jeep Grand Cherokee Chrysler Dodge Infinity www.amazon.com/dp/B00INA9LRM/ref=cm_sw_r_cp_api_glt_fabc_PGW2C7ZHQP9W3062ZJAH?_encoding=UTF8&psc=1
@Texas KnowHow I'm not sure if you know or not, but I have some bose tweeters that are 3 1/2 inches in diameter. Would I be able to drill out some plating and put in sheet metal screws to screw it down?
@@MikeTysonsKneecap The tweeter space is pretty maxed under the dash cover as you can see at :14. Cutting out the molded dash to fit in bigger tweeters in such a confined space is out of my jurisdiction really. I don't think I would try it personally. But, when there is a will, there is a way!
Thank You so much. That 7/32 was stumping for the longest time.
I know! It is a tricky little thing. Glad to help! Take care.
Thanks for this. One of mine has gone and sounds like a Dalek so I'll be following this soon. Saved me a lot of grief.
Glad it helped! Here's to doing it yourself!
Thank you so much for this video. I needed to get that top panel out cuz I have a horrible rattle under there I thought I was going to have to take the whole dash apart first. But not after watching this thank you
I glad that it helped! I hope that you pinpointed and fixed the issue!
Thank you so much for filming this ...
Question! I am gonna have to remove my dash in order to access and replace my actuator on my Jeep Liberty 2004. how easy or hard is it to get into that area without having to trigger the airbags?
trying to save the money in labor if possible especially If it's a manageable job
Sweet. Appreciate the detail video. Shouldn't be hard now that I know the trick.
I can’t find hex extractors??
Hi! The enter of the extractor is 1/2, 1/4 or 3/8?
Hi, it’s a small opening. Should be 1/4. Nothing larger than that. So, 7/32 socket on a 1/4 extention.
Someone buy this man a beer!!
Do you remember what size tweeter it was, I’m actually going to replace mine right now
Here is what I bought. I had to hard wire (no harness)
Powerbass 2.75" Dash Speakers 1999-2005 Fits Jeep... www.amazon.com/dp/B00INA9LRM/ref=cm_sw_r_sms_api_glt_fabc_DMQ44GH1K69E49W6HTXQ?_encoding=UTF8&psc=1
How did you get that 7/32 in the handles??
Pull out the two rubber stoppers on the handles. Mine fit in the opening. Good luck!
what speakers did you use to replace them?
Here is what I bought. I had to hard wire (no harness)
Powerbass 2.75" Dash Speakers 1999-2005 Fits Jeep... www.amazon.com/dp/B00INA9LRM/ref=cm_sw_r_sms_api_glt_fabc_DMQ44GH1K69E49W6HTXQ?_encoding=UTF8&psc=1
great man, thanks for the info
Hey how many inches were those tweeters?
I put in 2.75” tweeters from Amazon. I had to cut out the old ones and hardwire the new ones.
Powerbass 2.75" Dash Speakers 1999-2005 Fits Jeep Grand Cherokee Chrysler Dodge Infinity www.amazon.com/dp/B00INA9LRM/ref=cm_sw_r_cp_api_glt_fabc_PGW2C7ZHQP9W3062ZJAH?_encoding=UTF8&psc=1
@Texas KnowHow I'm not sure if you know or not, but I have some bose tweeters that are 3 1/2 inches in diameter. Would I be able to drill out some plating and put in sheet metal screws to screw it down?
@Texas KnowHow I mean the plating around the out line of where the tweeter go in
@@MikeTysonsKneecap The tweeter space is pretty maxed under the dash cover as you can see at :14. Cutting out the molded dash to fit in bigger tweeters in such a confined space is out of my jurisdiction really. I don't think I would try it personally. But, when there is a will, there is a way!
God bless you with these f**ng 7/32. 😢
Thanks... This was super helpful!
Nick Robinson Nice to know!😎
doing heater core and trying to unscrew those handhold bolts, everyone says 7mm..been turning for 20 minutes wtf..i will try the 7/32
I also have to replace the heater core, did you do it already?
Definitely helpful 👌🏽
What size tweeters
howler361 I got 2.75” tweeters and the drivers fit perfectly and the passenger’s seat side needed a little harmless persuasion.
Powerbass 2.75" Dash Speakers 1999-2005 Fits Jeep Grand Cherokee Chrysler Dodge In... www.amazon.com/dp/B00INA9LRM/ref=cm_sw_r_sms_c_api_i_bRCxCbQN10DZT
I have a 2006 Liberty and was looking around. Found out i need a 3.5in
Thanks!
Thanks for this video so much
Joshua Jones NP. I hope all goes well!
Texas KnowHow man I hooked up my second twitters to that the factory’s ones that
Good tip thanks!!
very helpful thanks
Thank you for making the video! Extreamly helpful! I'll be using my spatula too! It's OK! Lmao
You're welcome! I'm glad it was useful. BTW, after using the spatula on the Liberty, the eggs have never tasted better!
@@texasknowhow3143 haha 😂 🤣
Gracias. Un like. Y buen dia
Thanks for the video. I'm still telling your wife about the spatula though. You're in for it.
Paul Smith Noooo! Bro code! You’re welcome...😂
Don’t tell my wife😭😭😭