I'm too poor to support him but I name drop him everywhere. The problem is our bandwagon society only listens based on followers. Even the news reports start with "____ has X followers". smh
Great job. I suggest to put on the back of it the Honda name and El Camino next to it or under it.on the front grill put the Honda logo instead of the Chevy bow tie.
Championship white with red valve cover. MY MAN. You're doing the lord's work Bode. I honestly cannot wait to see a Champ White El Camino. It's the Hero we don't deserve!
Loving the build. I was hoping you would have painted the Honda parts with Chevy colors and the Chevy parts with Honda colors. But, this is still awesome!
I never had an uncle with an El Camino but my uncle did buy a brand new 1980 Corvette that was cream white with red interior. So this is still giving me Uncle Johnny vibes. He's still with us, he'd probably like this build. He liked Chevys and Hondas both back in the day.
Couple things you have going i like... 1...the Gantry lift is awsome for motors. Most of my stuff is truck stuff, lifted and lowered... lowered is hard to get my lift under lower control arms... and lifted trucks i have hard time getting engine high enough.. 2 is the winch. I just mounted a 12,000# winch on my trailer with a reciever and love it, so i can pull off trailer and use in shop. Alot of the time, i am by myself
Man I love your builds and it blows my mind that u give them away in sweepstakes on your channel. I have made respect for you and your talent keep up the great work love the channel
I appreciate that! I wish I could keep them all but unfortunately that’s not the case. Money and space plays the biggest factor in me doing these things. At the end of the day I can always build new projects and I am the builder. The built itself doesn’t mean as much.
Best way ive found to not have to be scared sanding the letters is to rub them with chapstick before you paint, once its dry you can literally wipe it right off and no sanding needed😂 but looking good man!
I started using a small paint brush and painting a thin layer of grease on the letters before I painting the valve cover then it just whipes right off at the end
There’s no way that this works clean. The edges would lift and leave a sloppy line. I appreciate your comment, but I’m not thinking that it works that way. I can be wrong though.
Please fix the dump bed part of it really would make that truck just that much more better. Also would be very useful would have helped spread that mulch easier
Do you have an artist rendition of the paint scheme, or are you still tossing around ideas? Personally, I think a simple 2-tone white with red would do it justice, but it's not my build 😆. Awesome work Bode 👍
Seen the series Starsky and Hutch ? The red car with the white stripe ? Just do the opposite with this nice warm white and the red. But whatever you do man, I'm loving this build. This is realy cool !
maibe you can experiment heating up the paint after its applied and maibe use different solvents as thinner to get the right wrinkle finish if you manage to get the exact same finish you might be able to sell the process or do more of them for others my father was an old time fotographer who devellopped a way to put pictures on painters canvas and he allso made sumting to make modern black and white pictures look like the older brownish style never made money out of it but did made some "beer money" from a lot of those pictures for people who liked them
I wonder if there's a way to make it more rear biased. I bet that CR-V is probably front/rear 70/30 or 60/40. The awd alone makes it better than that "Mustang" that one guy made. Also those fans in the wall are a bad ass idea. You're one of the few people that make me can't wait to build something, once I can get my life together. Being almost 40 with nothing sucks. How about El Camonda CR?
Hey Adam, the El Camino is looking really nice that engine bay is so much better than my Uncles (if he had one🤔)(oh and if I had an Uncle🤦♂😂) I can't stop looking at the Turbo Manifold it's just the shape of it looks so cool😎your doin good bro!!🙏👍John UK
you need to collab with LHT Performance, that would be cool. Also you should your Honda-mino to CHD, Classic Hondas at the Dragon...Tail of the Dragon...in Oct...big Honda meet.
Been watching for a long time and the shop truck was one of my favorite builds. Thank you for sharing so much info and just got my sticker as soon as I seen the notification about the giveaway...
i will be honest my only complaint is not doing the rear main seal since you had it right there, better to do it when its out rather than after the fact but thats just me, great video though
1OO% HUGE MISTAKE NOT DOING THE " REAR MAIN SEAL " FOR A $15 ~ $2O DOLLAR OEM PART WHILE HAVING THE ENTIRE ENGINE & TRANSMISSION OUT SUCK FOR THE NEXT OWNER TO HAVE TO CLEAN AND HAVE A OIL SPILL IN WHO KNOWS HOW LONG AND OIL IS THAT SEAL GASKET TO NOT DO THE AXLE SEALS, CAM SHAFT, CRANK SHAFT SEALS WATER PUMP TIMING BELT IT'S CAKE WALK RIGHT NOW ENGINE & TRANSMISSION ALL MOTOR OUT THE SUV THE NEW OWNER WILL REGRET THE REPAIRS ONCE THAT WHITE BAY GET GREY AND BLACK OIL STAINS ALL OVER PUT YOO CALL IS SHORT CUT HALF A$$ IS YOO STYLE KEEP IT UP AND GOOD LUCK ON THE NEXT OWNERS LUCK
I saw your Instagram post and got the early preview but always love watching the process(video). And of course supporting since Kyle's paintjob. I'm curious on what rims your going to throw on her???
How is this dude not more popular? Half of the other creators are garbage in comparison. This dude has consistently put nothing but quality out!
I'm too poor to support him but I name drop him everywhere.
The problem is our bandwagon society only listens based on followers.
Even the news reports start with "____ has X followers". smh
Its all about your soul. He hasnt had that meeting yet
100 percent!
Cleared valve cover looks better than i expected, I like it better than the wrinkle. Can’t wait to see it finished! Great work
9:18 man if that folding table could talk!!
Shout out to you for being original and creative.
El CRaVino
looking sharp!
Great job. I suggest to put on the back of it the Honda name and El Camino next to it or under it.on the front grill put the Honda logo instead of the Chevy bow tie.
Championship white with red valve cover. MY MAN. You're doing the lord's work Bode. I honestly cannot wait to see a Champ White El Camino. It's the Hero we don't deserve!
Stop the🧢 😂
Really the Lord's work ? Come on geez
The shop truck is Sic..!! I'm in...!!! I grew up on SBC and I'm hooked on that 65.
If I wasn't blind.....lol
Would you keep the logo on the doors?
I'm pumped to see it finished all white. Another killer build for sure.
Wow. That valve cover came out nice
Mannnn keep it coming Bode! I need more. She’s coming along mighty fine and the color combo is spankin.
That cover looks sick brushed. Clear coat on top would of looked sick
Loving the build. I was hoping you would have painted the Honda parts with Chevy colors and the Chevy parts with Honda colors. But, this is still awesome!
As you were talking about the spark plug cover piece, I was thinking, "He's going to dimple die this too, isn't he?"
SURE ENOUGH...
This is absolutely awesome. I don’t know how you could possibly top this build but I am sure you will . Engine bay is looking 🔥🔥
Oh man the color combo is perfect!
Can't believe your giving the shop truck away. I would happily drive it every day! Gonna get some merch!
I never had an uncle with an El Camino but my uncle did buy a brand new 1980 Corvette that was cream white with red interior. So this is still giving me Uncle Johnny vibes. He's still with us, he'd probably like this build. He liked Chevys and Hondas both back in the day.
Love this build, *love* that color combo, *love* that cover!
Couple things you have going i like...
1...the Gantry lift is awsome for motors. Most of my stuff is truck stuff, lifted and lowered... lowered is hard to get my lift under lower control arms... and lifted trucks i have hard time getting engine high enough..
2 is the winch. I just mounted a 12,000# winch on my trailer with a reciever and love it, so i can pull off trailer and use in shop. Alot of the time, i am by myself
Can't wait to see it with paint!
Beautiful spray paint job WOW that was up ❤❤
bro this whip is going to be FIRE! just needs VTEC and it will be a beast.
Valve cover looks good I would have done the fins the same way
My uncle did have a white El with blue stripe. This is great mix
Man I love your builds and it blows my mind that u give them away in sweepstakes on your channel. I have made respect for you and your talent keep up the great work love the channel
I appreciate that! I wish I could keep them all but unfortunately that’s not the case. Money and space plays the biggest factor in me doing these things. At the end of the day I can always build new projects and I am the builder. The built itself doesn’t mean as much.
Intake manifold swap would look nice
Love the color combo
The CR-Vemino is starting to become my fave monstrosity 🤘😎
Best way ive found to not have to be scared sanding the letters is to rub them with chapstick before you paint, once its dry you can literally wipe it right off and no sanding needed😂 but looking good man!
Color is awesome dude. Well done once again. Keep on wrenching.
THIS IS LOOKING AMAZING! Cant wait to see the final results!!
I started using a small paint brush and painting a thin layer of grease on the letters before I painting the valve cover then it just whipes right off at the end
There’s no way that this works clean. The edges would lift and leave a sloppy line. I appreciate your comment, but I’m not thinking that it works that way. I can be wrong though.
26:00 Clean... 🤌✨️
killer Red mate, wish I was in the US I'd love that work truck!
My uncle listed his El Camino when I showed him this. You won.
White is so CLEAN. He can't handle the FLOW, son!
thank you so much for priming the valve cover
This Mino is gonna be mean I can't wait
#bodesqaud #projectcrmino
Love the cam cover result,Adam!
love the red
loving this build
Bruh, when you stoped video and switched to the photo was epic. The way that gloss set that red off all I could do was say WETT! That bihh nasty❤
It's looking good brother.
Yes
Epic build.
@24:00 engine bay looking like a Honda-Mino split Sunday 🤤🤤🤤
I’m loving this build. Bring on the BLING 💥
The car gods were with you that day no way I could have gotten a bolt out doing that
Great combo Adam. It's coming along. Another great build is almost finished. Have a great weekend and God bless, Nico
Absolutely incredible! The color contrast of the fresh paint and the clean parts is amazing.
Please fix the dump bed part of it really would make that truck just that much more better. Also would be very useful would have helped spread that mulch easier
My uncle digs that shop truck and CRVmino engine bay with the motor!
The thought of winning this truck just made my week. I've been dreaming of building an exact replica of this truck.
Love the vicegrip idea for the stud, I needed that, thank you. That valve cover looks amazing dude.
Looking great bro...can't wait for the full Finnish...
Lookin pretty sick
The Monte Carlo SS front-end conversion would look sick AF on this El Camino
Do you have an artist rendition of the paint scheme, or are you still tossing around ideas?
Personally, I think a simple 2-tone white with red would do it justice, but it's not my build 😆.
Awesome work Bode 👍
My new favorite channel.
I love the shop truck! Definitely entering
Very nice job on that engine, valve cover is killer
Fire build 🔥
Seen the series Starsky and Hutch ? The red car with the white stripe ? Just do the opposite with this nice warm white and the red. But whatever you do man, I'm loving this build. This is realy cool !
Nice work
Love the art man. A bigger studio is definitely needed.
was thinking to myself and I can't believe this was a CRV DAMNNNNNN
El Hondino 😁
Saludos la CAMINO esta quedando a otro nivel BENDICIONES 🇵🇷🇵🇷🙏🙏🙏🙏
It is really coming together! Keep it up Uncle Bodevision! ❤ 💪
Coming along AWESOME! I'm a huge fan of the CRV, so this is badass to me!
maibe you can experiment heating up the paint after its applied and maibe use different solvents as thinner to get the right wrinkle finish
if you manage to get the exact same finish you might be able to sell the process or do more of them for others
my father was an old time fotographer who devellopped a way to put pictures on painters canvas and he allso made sumting to make modern black and white pictures look like the older brownish style
never made money out of it but did made some "beer money" from a lot of those pictures for people who liked them
Coolest project on the tube right now
Bode. Your channel is so underrated. Keep the 🔥 content coming
16:30 okiechrome
Well, will you just look at it!
Have you tried working the dash/steering column from a civic yet to get the angles/seating position to play a little nicer?
Awesome build 🤙🏻
I wonder if there's a way to make it more rear biased. I bet that CR-V is probably front/rear 70/30 or 60/40. The awd alone makes it better than that "Mustang" that one guy made.
Also those fans in the wall are a bad ass idea. You're one of the few people that make me can't wait to build something, once I can get my life together. Being almost 40 with nothing sucks. How about El Camonda CR?
Coming along really great man. 🔥🍻
Looks weird seeing the AWD setup sitting in there. Definitely on the cool side 👍😎💯
Hey Adam, the El Camino is looking really nice that engine bay is so much better than my Uncles (if he had one🤔)(oh and if I had an Uncle🤦♂😂) I can't stop looking at the Turbo Manifold it's just the shape of it looks so cool😎your doin good bro!!🙏👍John UK
you need to collab with LHT Performance, that would be cool. Also you should your Honda-mino to CHD, Classic Hondas at the Dragon...Tail of the Dragon...in Oct...big Honda meet.
I just wanna see a crv build now😂 anyways good stuff. Been very creative with the body fusions
Let's go bode my guy 🔥🔥🔥 work as always keep up the amazing work 💪💪💪
Loving this!
Awesome work
Been watching for a long time and the shop truck was one of my favorite builds. Thank you for sharing so much info and just got my sticker as soon as I seen the notification about the giveaway...
Yes!! Thanks for the support!
I think I see what you're doing with the car giveaways Adam 😎
Bro, your intro’s are the Best!! Funny as hell…!!!😂😂❤
Helky!
i will be honest my only complaint is not doing the rear main seal since you had it right there, better to do it when its out rather than after the fact but thats just me, great video though
U do a great job like always
You keep doing Honda's with Chevy's and its my favorite two things. Honda powered Corvette when? (turbo J series?)
Looking great, man! Wish you'd keep the truck or wish I'd win it but I have no use for it 😢
1OO% HUGE MISTAKE NOT DOING THE " REAR MAIN SEAL " FOR A $15 ~ $2O DOLLAR OEM PART WHILE HAVING THE ENTIRE ENGINE & TRANSMISSION OUT SUCK FOR THE NEXT OWNER TO HAVE TO CLEAN AND HAVE A OIL SPILL IN WHO KNOWS HOW LONG AND OIL IS THAT SEAL GASKET TO NOT DO THE AXLE SEALS, CAM SHAFT, CRANK SHAFT SEALS WATER PUMP TIMING BELT IT'S CAKE WALK RIGHT NOW ENGINE & TRANSMISSION ALL MOTOR OUT THE SUV THE NEW OWNER WILL REGRET THE REPAIRS ONCE THAT WHITE BAY GET GREY AND BLACK OIL STAINS ALL OVER PUT YOO CALL IS SHORT CUT HALF A$$ IS YOO STYLE KEEP IT UP AND GOOD LUCK ON THE NEXT OWNERS LUCK
you should put a vtec head on the b20 block
“I don’t care what you call me, just don’t call me late for dinner ..”
Damn i love it what beautiful project 🔥🔥💪
superb
As before, my uncle sucks and does not compete. Love the combo and cant wait to see this thing done.
I saw your Instagram post and got the early preview but always love watching the process(video). And of course supporting since Kyle's paintjob. I'm curious on what rims your going to throw on her???