Arduino Nano Unboxing| Uploading First Program on Arduino Nano- By Manmohan Pal
ฝัง
- เผยแพร่เมื่อ 23 ก.ย. 2018
- Arduino Tutorial for beginners:
What is Arduino by Manmohan Pal
• What is Arduino by Man...
Unboxing Arduino Nano
• Arduino Nano Unboxing|...
Setup and Configure Arduino Nano
• Arduino Nano Unboxing|...
First Programme for Arduino Uno
• Video
Blinking LED Patterns (Project)
• #4 Arduino programming...
Arduino is an open-source electronics platform based on easy-to-use hardware and software. Arduino boards are able to read inputs - light on a sensor, a finger on a button, or a Twitter message - and turn it into an output - activating a motor, turning on an LED, publishing something online. You can tell your board what to do by sending a set of instructions to the microcontroller on the board. To do so you use the Arduino programming language (based on Wiring), and the Arduino Software (IDE), based on Processing.
Over the years Arduino has been the brain of thousands of projects, from everyday objects to complex scientific instruments. A worldwide community of makers - students, hobbyists, artists, programmers, and professionals - has gathered around this open-source platform, their contributions have added up to an incredible amount of accessible knowledge that can be of great help to novices and experts alike.
Visite the blog links for complete tutorial with code and Circuit Diagrams
Arduino Introduction | What is Arduino
arduinobymanmohan.blogspot.com...
Setting up Arduino Nano
arduinobymanmohan.blogspot.com...
Making a first code for Arduino UNO
arduinobymanmohan.blogspot.com...
How to Read input from Arduino Switch
arduinobymanmohan.blogspot.com...
Differnet blinking LED patterns using Arduino UNO
arduinobymanmohan.blogspot.com...
In this video i will show you how to fix Code upload error in Arduino Nano, The possible reason behind the upload error can be
1. ch340 Driver Installation ,
2. Old bootloader,
3. No bootloader,
for cases 1 and 2 kindly watch my previous uploaded videos on this topic. links are given below.
for 3rd case i am resolving issue by updating bootloader in arduino nano using Arduino Uno as programmer by ICSP connection, by making Arduino Uno as master and Arduino Nano as Slave we can programm slave using Master as Programmer.
1) " Arduino Nano Unboxing| Uploading First Program on Arduino Nano- By Manmohan Pal"
• Arduino Nano Unboxing|...
2)" Arduino Nano Driver (ch340) install and troubleshoot by Manmohan Pal " • Arduino Nano Driver (c...
3) "Arduino Nano Code Uploading Error fixed/Bootload Arduino Nano/ ICSP Connaction/ Bootload any Atmega"
• Arduino Nano Code Uplo...
Arudino IDE Download Link
www.arduino.cc/en/main/software
Ch340 driver download link
drive.google.com/file/d/13TFs...
Manmohan Pal
Email: mannmohanpal@gmail.com
Whatsapp: 8989811397
Facebook: / mannmohan.pal.7
Facebook Page: / electronics-by-manmoha...
Instagam: #manmohan.pal
Twitter: @ManmohanPal15
TH-cam channel: / mannmohanpal
Blog: electronics4ubymanmohanpal.blo...
Watch the completer series of Arduino Programming
Playlist for Arduino Tutorial
• What is Arduino by Man...
PC Fan Hack: electronics4ubymanmohanpal.blo...
Blinking LED: manmohanpal.wordpress.com/led...
Visit Other Related Videos
Remote control fan
• Remote control Fan- IR...
Remote control switch
• Remote control Relay- ...
Remote operated light
• Remote operated light-...
Automatic Street Light
• Automatic Street Light...
How to Test IR Reciever TSOP 1738 by Manmohan Pal
• How to Test IR Recieve...
#Arduino, #NodeMcu #ESP8266 #Nano #Programming - วิทยาศาสตร์และเทคโนโลยี
Can you tell me what components i will require where I want a servo motor with 180 degree rotation and where I need to change the product with which rechargeable battery and a illuminated switch or vibrator where I should know whether the motor is on or off... All these things should fit in 6 by 6 cm of area
I just bought one for around $6, it's coming tomorrow, I'm so excited
Sir you are best teach of arduino.i understand how to simple programming to arduino . Because I learning in puc.
Thanks dear
Soldering ke liye thoda fine-tip iron lena better rahega, ya fir normal wedge tip ko thoda sand paper (120 grit) se ghis lena chachie, aur solder metal aur kam-kam use karna chachie. Aap jaise kar rahe hain, ussey solder-bridge banne ka kafi chance rehta hai.
great tip brother👍👍
do we have to solder the pins on the nano 3, really?, do we have to? if yes, then Uno R3 might be better!
Can we use arduino pro mini same progrming code without any change..
I had make a circuit of Arduino to communicate (wireless; transmitor amd receiver)with each other ......but it is not working even wiring is all right .....is it problem of different bootloader as one is new and one is old??
when i was uploading the code.. its showing an error as.. the system cannot find the file specified...what shall i do now
Arduino ke saath lagane vala cable konsi type ka he (A,B,C)?
I have arduino nano and it's tx, rx, pwr light continuously GLOWING so what it's indicate , me koi program bhi uplode nahi karparahu hu uperse arduino kuch bhi act nahi karraha please replay
in error message its written that programmer is not responding and attempt 5 of 10 not in sync. Please help
Kya program karane ke bad Data cable nikal sakate hain
Sir blink code is worked but LCD code kaam nahi kar rahe jabki UNO me LCD code kaam karta hai. Please give me any solution.
I have arduino nano ch340g there is no indication of pwm signal sigh ~ on any port, does it have pwm capiblity or not
Chk uno specification for pwm pins its all same
Nice facts about arduino. Thanks sir
Why copy error messages comes when I want to compile the code
Sir I face some problems to code nano for the third eye can you me please
Can i run it with 5v??...plz reply
How to connect two nano bord for one projects
Can i change battery using ardino
Which aurdino nano board is good and from where it is to be purchase pl guide me.
Buy from amazon, uno is good for first time user
What is the timer of Arduino
My Arduino nano's show error in uploading sketch....i have right driver also ....than reason of not uploading?........but I see tthat L led(side one to PWR) is blinking very low... seems that get fuse ......can it be reason
th-cam.com/video/8RE8URgENUg/w-d-xo.html
This may help you
While uploading, It shows that programmer is not responding and, not in sync.
How do I solve it?
Sugam pandit first you should burn bootloader to use
got to tools->Processor->ATMega328P(Old boot loader)
Sir we can program in mobile also
Sr ji mobile se program karne mein error aa raha hai to eska saluson bata sakte ho or nano bord ek baar program upload huwa hai Lekin ab bar bar error aa raha hai
सर् आपके वीडियो देख कर मेने भी काफी circuit बनालिये ।आपके वीडियोस हैल्पफुल है काफी।
thankyou sir, wish you better luck for Arduino classes
Which languages is use?
Wow...very interesting
Excellent video.
perche' non riesco a programmarlo?
How it work..
Requar a vdo of it
Thanks sir good information.
Welcome
I make LED 8x8 Matrices Display using arduino nano (MEGA 328P) but arduino software show me, "Can't upload program to arduino board".
Help me please
email the code and if possible video link with circuit diagram
I want to bay original ardiuno nano in chipest
please help me
Love from Bangladesh
Mere Arduino nano board me code upload karte samay no connected board found bata raha h jabki light blink kar rahi h
Please solve the problem
Port not showing in device manager
I am not able to select the port
My RX light is continuously glowing
Hi i am not able to connect my arduino nano plez.. Healp me
very nice brother
Supperrrrrrrr sir
Arduino nano se mobile octoped bananahe ka code kese banaye
8×24 led matrix arduino connections. With supply
yes i planned to make video on same
पावर देने का मतलब है कि जब मोबाईल का USB जुडा को तभी कोड काम करता है?
Bina soldering use kar sakte kya?
Bina soldering kiya aap program kr skte h
can i connect led to the board without using bread board?
yes you can, but use it with 330 ohm resistor
@@ManmohanPal thanks for answering
Can we make rc car wireless car
Ager phone se ardruino nano ko chalana hain to kaise pata karege ki woh sahi port laga hain , please bataye, Sir.
Disconnect karne par arduino ide se port gayab ho jayega
What was the price
Sir can we make a obstacle avoiding car with ardunio nano
Yes
भाई साहब इस वीडियो में जो आपने सर्किट दिखाया है उसमें स्विच लगा हुआ है
लेकिन जो आपने डायग्राम दिखाया है उसमें switch कहां पर लगाना है यह नहीं बताया ???
please make a video on how to control dc motor using arduino
you cam make a PWM generator with 555 timer IC easily to control motor speed.
I have worked on this project, interfacing the arduino with LabVIEW. Tell me if you are interested.
Nice
Nice video
Thus we need internal communications
sir please tell me in which language we use for arduino id
balalalalalalalalalalala thats what i understand...
too good video
thanks dude
Blink program not delete Arduino neno
Please send me code for 4×4 led cube please bro
Good
thanks
Title: English
Video: Giberish
what the freak is this??
Its Hindi Language, from INDIA
can you give me the code for bluetooth control car using arduino nano
plz reply the message
follow my channel, i will teach you how make the code
Where to buy Arduino Nano in india ... Cheapest??
either search for local Robotics Shope, or buy from Amazon
@@ManmohanPal thanks
its showing error ..
Suppose you haven't heard of my language, but you got "breadboard" right ahh it's a slow process.
program nhi ho raha
port is not showing
check for any yellow mark entry in Device Manager, install proper driver
While uploading programmer not responding error keep appearing
fabulous video
Relay 5 volt lagega
Make a video on how to delete old programme in arduino nino
Just upload a blank file, old code will erased automatically
why the video has english title if you do not speak in english?
waiting for your reply
Nice work 👌
fuck off
sexy
Sir apna whatsapp number btaye
Codding me
Copy error message de raha
Please help me
don't you know the spelling of imagine on home page
Bhai sikhna hai
Plzz sir batana
Bhaii yar background to sahi rakhty
I totally agree with you . 😁
Really sorry for that
English pls
Please reply
Remove unnecessary things on the screen bro. It's kinda annoying.
Could you use some more understandable language? For example, English?
I am from Indian, and my subscribers prefer hindi, also i made videos in english for that you have to browse my channel
@@ManmohanPal बस यह लिखें कि आपका चैनल केवल हिंदी-समझ के लिए है।
waste