GEO5 Tutorials: Designing a Sheet Pile Wall in Sheeting Design

This tutorial shows how to quickly design a non-anchored wall in the Sheeting Design program.
The program GEO5 Sheeting Check allows to design following shoring excavation and retaining wall structure types:
www.finesoftwar...
Sheet pile wall
Diaphragm wall
Soldier pile wall
Pile wall
Secant Pile Wall
Tangent Pile Wall
Contiguous Pile Wall
© 2017 Fine Ltd. All rights reserved. www.finesoftwar...

[@ccaaproduction105]

Thank you for your sharing information.

[@mkhoiri]

Thank you, very useful sharing

[@FunnyChannel_2302]

how to input borehole in front of sheet pile and input the borehole behind the sheet pile?

[@GEO5English]

Hello, the soil profile is defined only behind the wall. The required layers and parameters are entered in the Profile, Soils, and Assign frames. The soil profile in front of the wall is considered the same as behind the wall. Hope this helped, all tutorials you can find on our "learning" website www.finesoftware.eu/geotechnical-software/learning/. Best regards, Fine

[@aakashkhanal431]

Hey what is the final Factor of Safety(FOS) for the given sheet pile?

[@GEO5English]

Hi Aakash, the given structure is verified according to EN1997 (limit states). The final FoS is not calculated in this case. Other tutorials you can find on our "learning" website www.finesoftware.eu/geotechnical-software/learning/. Best regards, Fine

[@soumyajitdatta2154]

Any US based code available now for design?

[@GEO5English]

Yes, we have AASHTO LRFD for standard geotechnical calculation and ACI 318-19 for verification of concrete structures. Soon will be also available AISC 360 for steel structures. If you want to learn more, try our "Engineering manuals" - step-by step guides available at www.finesoftware.eu/geotechnical-software/engineering-manuals/?predatorId=SheetingDesign&langId=en. Best regards, Fine

[@azharf3753]

How to add concrete sheetpile?

[@GEO5English]

Hello Azhar, In this case, we recommend using the “User input A, I, E, G” type of wall. More info you can find in our online help - www.finesoftware.eu/help/geo5/en/user-input-of-a-i-e-g-01/ Hope this helps, best regards Fine team

[@oziturker5936]

why there is no geometry section on method tab ? is this because iam on free trial ?

[@GEO5English]

Hi Ozi, our demo version works without any analysis limitations and you can try all implemented options. More details about this program and others you can find in the Engineering Manuals, they explain how a particular task can be solved. All materials are available at www.finesoftware.eu/engineering-manuals/.

[@oziturker5936]

@@GEO5English thank you i figured it out. i should had opened another operator that fits my problem. now i find it thanks again :)

[@GEO5English]

@@oziturker5936 Great, thank you for your feedback ;-)

[@rashidnazarov3444]

Is it possible to design Combi-walls?

[@Hitngan]

You can design it as a King Pile wall