Nope, it's all in exhaust mode... for example, side rads, exhaust, airs is being pulled all over the places, as the case has a gap inside, same goes for the back fans... temps are insane! GPU 42 degrees in worst case scenario 😁 CPU maxed out in mid 60s, something like 65-66
@@LevelUPGamingTech Thank you so much for the fast reply im considering building mine close to what you did... This case is phenomenal !! Thanks again for the tip and the great vid
@@XxD3r5txX Thanks buddy, glad you liked it. The case is coo, but it is a bit hard to work in, requires a lot of patience and planning ahead... confined spaces 😁
Nice build! I am contemplating this case for my next build, but I am worried that I cannot utilise any PCI-E slots with this case. Maybe you could clear this up for me, is it still possible to plug in, let's say, a usb pci-e hub?
Literally not possible, as PCIE riser cable will block it, but it could go above it if that hub is not tall, also that is the problem as well, not much space from glass to the board... maybe some 6-7cm top
@@LevelUPGamingTech Damn, thats a big thing to consider. I need a powered PCI-E expansion card for my VR equipment. 6cm is plenty, but even if I manage to plug it below the riser for the GPU, I recon that the card will also not be thumbscrewed to the case for support plus I would need to get the USB cables to the ports of that wobbly PCI-E card. Strange design choice for this case, all PCI-E slots on the motherboard are instantly useless. Still, it is one beautiful case and if I find a workaround for the usb extension card, I will still buy it!
Hey, pc building noob here, I was wondering if the rtx 4090 would fit in this case. Looking at pictures the 4090 seems like it would be too large for smaller cases like this one.
This case is everything but small 😀 It can fit in the front without issues, side mount could be a problem, but if water cooled then it will not be an issue
the GPU mount on the case is stupid/now well thought out. its a very nice open case, then there is a massive riser cable, it could have been better done by antec
It can be mounted but can't fit, clearance does not allow me to use the pump and fittings at that angle, pump is rather on a large side it is touching the glass... Alternatively GPU can be mounted next to the board as well 👍
Thanks a lot I took another pump without thise fittibgs will try ti fit it in front instead will also look cool I'm sure I'll mail you the final result
![RED KING! - ANTEC CANNON [12900k & 2080 Super]](http://i.ytimg.com/vi/u6q4Zv95YF8/mqdefault.jpg)
Looks nice for showing off 🙂
The blue water adds a nice effect!
Hahaha quite literally that 😂
This is so relaxing. Also, thanks for discount code, that's very kind of you.
Thanks my dude 😊
Super dope pc build my bro 👍👍👍
Thanks very much for sharing this video! 💖
*Greetings from Costa Rica!* 🌴
Thanks for watching buddy and glad you like it 👍😁
Beautiful Build 😎🥤
Thanks dude 😀
Great video man ! could you please say which way your fans flowing ? Is it all intanke on the 3 radiators ?
Nope, it's all in exhaust mode... for example, side rads, exhaust, airs is being pulled all over the places, as the case has a gap inside, same goes for the back fans... temps are insane! GPU 42 degrees in worst case scenario 😁 CPU maxed out in mid 60s, something like 65-66
@@LevelUPGamingTech Thank you so much for the fast reply im considering building mine close to what you did... This case is phenomenal !! Thanks again for the tip and the great vid
@@XxD3r5txX Thanks buddy, glad you liked it. The case is coo, but it is a bit hard to work in, requires a lot of patience and planning ahead... confined spaces 😁
Great job man, was thinking of getting this chassis but I'm not sure its worth it as I just have an aio and I'd leave my gpu air cooled
In that case it's not, but for a custom loop it gives you so much freedom.
Nice build! I am contemplating this case for my next build, but I am worried that I cannot utilise any PCI-E slots with this case. Maybe you could clear this up for me, is it still possible to plug in, let's say, a usb pci-e hub?
Literally not possible, as PCIE riser cable will block it, but it could go above it if that hub is not tall, also that is the problem as well, not much space from glass to the board... maybe some 6-7cm top
@@LevelUPGamingTech Damn, thats a big thing to consider. I need a powered PCI-E expansion card for my VR equipment. 6cm is plenty, but even if I manage to plug it below the riser for the GPU, I recon that the card will also not be thumbscrewed to the case for support plus I would need to get the USB cables to the ports of that wobbly PCI-E card. Strange design choice for this case, all PCI-E slots on the motherboard are instantly useless. Still, it is one beautiful case and if I find a workaround for the usb extension card, I will still buy it!
@@rowdystrik6634 It was built more as a "showcase" case... which in return has limitations for regular PC usage
Hey, pc building noob here, I was wondering if the rtx 4090 would fit in this case. Looking at pictures the 4090 seems like it would be too large for smaller cases like this one.
This case is everything but small 😀
It can fit in the front without issues, side mount could be a problem, but if water cooled then it will not be an issue
the GPU mount on the case is stupid/now well thought out. its a very nice open case, then there is a massive riser cable, it could have been better done by antec
I am wondering if the pump combo fits next to the Motherboard?
It can be mounted but can't fit, clearance does not allow me to use the pump and fittings at that angle, pump is rather on a large side it is touching the glass... Alternatively GPU can be mounted next to the board as well 👍
What is the beat link
Did you use 14mm tubing ?
Yup 14 OD 10 ID
Thanks a lot I'm in the process of building it...I'd love to put the pump behind just like you how did you fix it ?
With it's brackets to the radiator directly, it fits the 120mm holes perfectly 👌
Thanks a lot I took another pump without thise fittibgs will try ti fit it in front instead will also look cool I'm sure I'll mail you the final result
N É ASSIM QUE SE COLOCA A PASTA TÉRMICA!
ahhhhhhhhhhhhhhhhhhhhhhhhhh tifudeeeeeeeeeeeeeeeeeeeeeeeee sabe nem limpar o trazeiro e ta querendo falar na internet kkkkkk
Ugly af tbh