I’m not too sure if Tekno will do a 2.0 as the MT410 was a trial truck for them and wasn’t really meant to take off lol. I heard they just want to stick to their buggies as this is what they are known for. I think the MT410 was a side line truck and not sure if they will bring a new line out. I really hope they do but there isn’t much they can improve on this undoubtedly incredible truck.
I found your channel looking for the durability of the mt410 and I must say I'm very impressed! I'm looking for something that can take a beating and I think you've helped me make my mind up! Is there any upgrades besides the body post that are must do? I've never had a tekno so I'm not familiar with thier quirks. Thanks and awesome video! Subbed!
Hey man thanks so much for your comment it’s much appreciated bro. I bought this beast second hand and I must say the owner did a magnificent job of putting it together and adding a few small upgrades. First upgrade I would do is the M2C center diff with metal spur (original is plastic) next is a wheelie bar, alloy shock caps and M2C shock standoffs. You can do chassis but I found the factory is all you need. Depending on how hard you want to bash it will depend on how many mods you’ll need. I would definitely go a BasherBodies body 100% because these trucks destroy bodies. I kept everything as light as possible so running the 4s setup is perfect for me. My other videos show most of the upgrades too. Best of luck with the build man you are going to love it and thanks again. 😎👌🏼👊🏼👍🏼
I didn’t make the wheelie bar, I bought it on eBay. Here is the link bro. www.ebay.com.au/itm/264478257223?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=Hd30QE9KRqu&sssrc=4429486&ssuid=HVNCIdQoTlK&var=564166033868&widget_ver=artemis&media=COPY
Nice work as always. Mate where is this site? Looks like it could be out Gnangara way or somesuch. That's the crazy thing about Perth/Swan coastal plain. You don't have to dig far to get yellow sand.
Haha no you don’t at all mate. It’s on the corner of Tonkin and Armadale Rd. You were way off 🤣🤣. It’s a great spot but it’s changing every week. That huge mound of sand isn’t there anymore already. 🤣😎👊🏼👌🏼🤙🏼
It’s been there for well over a year now as it’s going to be a huge industrial area. Can’t wait till they lay the slab…..you know where I’m going with this right?? 🤣🤣🤣
I used the longer Arrma body mounts and cut them down. I slid them down into the original Tekno square bases and placed the body on top and adjusted the posts to where I wanted it. Drilled new holes in the posts and used 4mm screws to hold them in place then drilled the body holes then you have to drill new body pin holes and lift the drill up as it’s spinning to elongate the hole until it fits the thickness of the body. Hope this helps bro. 😎 🤜🏼🤛🏼
Hey bro it’s the Monster Maxx body. Here’s the website with my video on it. Cheers dude. www.basherbodies.com/product/7081175/monster-maxx-flatbed-slash-offroad
Thanks man I appreciate it. I have the body they call the basher on my MT410. I like the body you have a lot better. My MT410 is nuts. I built it with every m2c racing part they make for the truck. Best basher l have ever owned.
Hi Gary. It the Maxx-X body for BasherBodies but I’m not too sure if he makes this style anymore. Send him an email and ask and you can even link this video in your email to him. Just get one mate, you won’t be disappointed. Cheers brother. 🤜🏼🤛🏼
Haha thanks mate. Yeah it was too close I thought I had it going a little more left, but it didn’t 🤣. Mate you gotta come there before it disappears, it’s such an awesome spot.
Tbh I have no idea as I bought it second hand but going by feel and the resistance I get when holding one wheel and spinning the other it feels like perhaps 60k front and rear and about 500k center. I hope so because that’s what I’m putting in when I service it. 😃👍🏼
Thanks brother appreciate it. They are just the standard Arrma posts. Just had to drill the square post holes out a bit and screw them in. Works great.
I put the Badlands 2.8 on my MT410 and it seem to sit very low to the ground. How are you dealing with this issue and does your chassis scrape the ground alot?
@BuffaloSoldier-tb9dn bro not at all. You may need to adjust your suspension height and oil. I absolutely love these tyres in this truck and you can see for yourself how well if runs, jumps and lands. This is by far my favorite truck of all time.
Haha thanks man. Yeah that was really close. I like to get up close and personal but that was too close and VERY personal 🤣🤣. Thanks for the kind words brother. 😎👍🏼👊🏼
🤣🤣🤣 I almost lost my head. Cheers brother and thanks for making such an amazing body for this truck. It truly is one hell of a tuff tuck now. I absolutely love it. 😎👊🏼🤙🏼👌🏼💪🏼💪🏼
Love seeing this truck running! 😮
@@delmartinez9349 thanks bro. Yeah it’s my absolute favorite truck. It’s RC perfection imho.
I keep watching this video. Some great landings. Got me pumped up.🎉😊👍. Great driving
Thanks so much bro appreciate it 😎👍🏼👊🏼
Bro,That almost knocked you put!! Great idea for mudguards.
Dude it was so close. I thought I had it just going past me, but I was wrong 🤣. Thanks for the kind words bro.
😎👊🏼
will there be a mt410 2.0 its time all the other models in the tekno line up has been updated exept this one
I’m not too sure if Tekno will do a 2.0 as the MT410 was a trial truck for them and wasn’t really meant to take off lol. I heard they just want to stick to their buggies as this is what they are known for. I think the MT410 was a side line truck and not sure if they will bring a new line out. I really hope they do but there isn’t much they can improve on this undoubtedly incredible truck.
I found your channel looking for the durability of the mt410 and I must say I'm very impressed! I'm looking for something that can take a beating and I think you've helped me make my mind up! Is there any upgrades besides the body post that are must do? I've never had a tekno so I'm not familiar with thier quirks. Thanks and awesome video! Subbed!
Hey man thanks so much for your comment it’s much appreciated bro. I bought this beast second hand and I must say the owner did a magnificent job of putting it together and adding a few small upgrades.
First upgrade I would do is the M2C center diff with metal spur (original is plastic) next is a wheelie bar, alloy shock caps and M2C shock standoffs. You can do chassis but I found the factory is all you need. Depending on how hard you want to bash it will depend on how many mods you’ll need. I would definitely go a BasherBodies body 100% because these trucks destroy bodies.
I kept everything as light as possible so running the 4s setup is perfect for me. My other videos show most of the upgrades too.
Best of luck with the build man you are going to love it and thanks again. 😎👌🏼👊🏼👍🏼
What did you do with the whelie bar? How? Can you make a video about it?
I didn’t make the wheelie bar, I bought it on eBay. Here is the link bro.
www.ebay.com.au/itm/264478257223?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=Hd30QE9KRqu&sssrc=4429486&ssuid=HVNCIdQoTlK&var=564166033868&widget_ver=artemis&media=COPY
What a run! Sweet video!
Thanks bro appreciate it.
Nice work as always. Mate where is this site? Looks like it could be out Gnangara way or somesuch. That's the crazy thing about Perth/Swan coastal plain. You don't have to dig far to get yellow sand.
Haha no you don’t at all mate. It’s on the corner of Tonkin and Armadale Rd. You were way off 🤣🤣. It’s a great spot but it’s changing every week. That huge mound of sand isn’t there anymore already. 🤣😎👊🏼👌🏼🤙🏼
@@WestOzRC ooh bloody hell I was wasn’t I. Dang, these places don’t seem to last long.
It’s been there for well over a year now as it’s going to be a huge industrial area. Can’t wait till they lay the slab…..you know where I’m going with this right?? 🤣🤣🤣
@@WestOzRC hahaha yeah I think I do.
cool bash... mt 410 is tough ... bought one to lol
Oh nice brother. Man you are going to love it. Keep me up to date on it. 😃👍🏼💪🏼👌🏼👊🏼
@@WestOzRC you will see it apear soon enough ;)
Do you have a part number for that body happy new year?
I would like to buy one because I have a Tekno mt 410 from m2c racing Basher body thanks this is Gary 🙏👍
Hey bro happy new year to you too. The link to the body is in the description. 👍🏼
How did you mount the body? I am trying to but thr stock tekno body nount are not long enough. The body is thicker than the length of the body mount
I used the longer Arrma body mounts and cut them down. I slid them down into the original Tekno square bases and placed the body on top and adjusted the posts to where I wanted it. Drilled new holes in the posts and used 4mm screws to hold them in place then drilled the body holes then you have to drill new body pin holes and lift the drill up as it’s spinning to elongate the hole until it fits the thickness of the body. Hope this helps bro. 😎 🤜🏼🤛🏼
@@WestOzRC Thx
I ended up shaving off the mounting tabs on the stock body mounts.
What body is that from basher bodies didn't see it for the mt410 on their website.
Hey bro it’s the Monster Maxx body. Here’s the website with my video on it. Cheers dude.
www.basherbodies.com/product/7081175/monster-maxx-flatbed-slash-offroad
Thanks man I appreciate it. I have the body they call the basher on my MT410. I like the body you have a lot better. My MT410 is nuts. I built it with every m2c racing part they make for the truck. Best basher l have ever owned.
@@Schmidt3850 that’s awesome bro. I do like this body for sure. Yeah man they are an insanely tough truck indeed. Absolutely love mine. 😎👊🏼
Hi, this is Gary. Do you have a part number for that body?
Hi Gary. It the Maxx-X body for BasherBodies but I’m not too sure if he makes this style anymore. Send him an email and ask and you can even link this video in your email to him. Just get one mate, you won’t be disappointed. Cheers brother. 🤜🏼🤛🏼
Thanks I have Tekno mt 410 super sweet truck. I would like to have one of those bodies. MT 410s are like built like tanks super tough. 🙏👍😎
Awesome man , you almost wore that little beast 😅
Haha thanks mate. Yeah it was too close I thought I had it going a little more left, but it didn’t 🤣. Mate you gotta come there before it disappears, it’s such an awesome spot.
Nice!!
Thanks mate. 😎👊🏼
Nice vid keep up the RIPPIN...
Thanks brother appreciate it. 😎👊🏼🤙🏼
You running stock diff fluid weights?
Tbh I have no idea as I bought it second hand but going by feel and the resistance I get when holding one wheel and spinning the other it feels like perhaps 60k front and rear and about 500k center. I hope so because that’s what I’m putting in when I service it. 😃👍🏼
Awesome vid. What body posts are you running?
Thanks brother appreciate it. They are just the standard Arrma posts. Just had to drill the square post holes out a bit and screw them in. Works great.
It's 6s or 4S?
4s bro and it’s all she needs to be amazing. 😎👊🏼👌🏼💪🏼
It's very good
What Kv is the motor? 2200kv?
@@futabaguy1 it’s a 2500kv JLB Cheetah motor I had spare and it’s absolutely awesome for the MT410. Pinion is 15T.
Loved my Tekno sct410.3. Thing was indestructable? Should have never sold it
Oh brother, so sorry for your loss. There’s always time for a new one 😃👍🏼👊🏼
What tires are you running?
They are the Badlands 2.8 bro. Great tyres. 👍🏼
I put the Badlands 2.8 on my MT410 and it seem to sit very low to the ground. How are you dealing with this issue and does your chassis scrape the ground alot?
@BuffaloSoldier-tb9dn bro not at all. You may need to adjust your suspension height and oil. I absolutely love these tyres in this truck and you can see for yourself how well if runs, jumps and lands. This is by far my favorite truck of all time.
Fantastic video mate great jumps and watch out for the attacking Rc trucks 👍🦘🤪🤣🤣🤣
Haha thanks man. Yeah that was really close. I like to get up close and personal but that was too close and VERY personal 🤣🤣. Thanks for the kind words brother. 😎👍🏼👊🏼
🤩🍻
Cheers brother. 😎👊🏼🍻
Dude!!! I Almost droppd my phone! 😅😂
🤣🤣🤣 I almost lost my head. Cheers brother and thanks for making such an amazing body for this truck. It truly is one hell of a tuff tuck now. I absolutely love it. 😎👊🏼🤙🏼👌🏼💪🏼💪🏼
Do you have a part number for that body happy new year?