How to: LED Reverse and Rear LED Turn Signal Lights 2021-2024 Tahoe / Suburban

[@aputty1s]

Great video, to confirm you only added 1ea resistor to the reverse light on the drivers side? The passenger side didn't require another resistor? Looks like you mounted the resistor with a self tapping screw?

[@Kovz34]

Yep! Just one resistor on the drivers side. I mounted it to the body with a self tapping stainless screw.

[@MrChey85]

Good video, I have a question what if I just buy the reverse led will I still have to install the resistors ?

[@Kovz34]

@@MrChey85 ​​⁠you’ll still need to install one resistor or your infotainment screen will stop working properly. Ask me how I know lol

[@smithrb]

@@Kovz34 which wire did you use? the white, or one of the two blacks?

[@Kovz34]

@@smithrb The white one and one of the blacks. I believe I used the two "outside" wires connected to the light socket.

[@perezalfredo06]

🔥🔥🔥🔥

[@redeclipsegst]

Which cable gets the resistor? what color?

[@Kovz34]

The white one and one of the black ones. I used the two “outside” wires on the socket.

[@moxxy5411]

I put led blinker and reverse light with canbus and I got no error whatsoever

[@Kovz34]

What brand did you use for the reverse lights? The infotainment screen was displaying a blank screen before I put a resistor in for the reverse lights. I did not need a resistor for the turn signals.

[@mr_handsome2you]

​@Kovz34 did you added the resistor on both sides? I put them on one side and I'm getting notifications still?

[@Kovz34]

@@mr_handsome2you No, I only put one 50W, 6 Ohm resistor on the drivers side. The links to all the parts I used are in the description. Were your resistors the same size? Same brand LEDs?

[@samadamsdownrange5223]

Whered you buy from? Link? Tia