Love the way it looks, I'd like to do this on my 99 RS. One note, I'd add an extra screw to each corner to help keep the material from dropping that much on heavy bumps. But definitely ordering one when they're available
That's rad Bucky! 😄 I legit did the garage door liner lip on the L bumper of my first GC. As a customer of Rokblokz having them on my forester and my f150 tow vehicle rally truck, I know these are going to be top quality! Bucky, if you're ever up here in Ont Canada we can do some good old bass fishing and play with my first gens. Get lippy in 2020🤙🤙
@@craigpriest2720 It was similar to this one. I bonded the joint together after fitting it. www.ebay.com/itm/2x-Front-Deep-Bumper-Chin-Spoiler-Lip-Valance-Splitter-Fit-VW-Golf-MK3-3-VR6/132637196020?fits=Model%3AJetta&epid=2281874652&hash=item1ee1cafef4:g:5fYAAOSwo9VbCPzZ
Looks fantastic. Maybe a little heat gun exposure will help work those waves out. That worked on my FRP front lip. That and sitting directly in the hot California sun will help too
I would 100% buy this!...Already have their flaps and love the material. I've been looking to do this but wasn't thrilled when I went to look at the stuff at Home Depot. Really hope they can hook this up for 08-14's!!!🙌
The tape method is legit. I think I need men some that for my rallycross/hooptieX car. Way better than that home depot shit. Loving the chillhop soundtrack. My favorite channel to turn on and relax.
YES FINALLY! I've been looking for this! I even commented on one of your IG posts asking about the custom lip, so definitely interested for my GC8 build as well!
You can probably clear the ripple in it if you pull on the lip tight from one end when fitting it and use more screws or pop rivets. Use a screw/rivet say every 8-10cm. You can then smash out of that driveway without it almost pulling off the corner of the lip haha.
My favorite channel out of all the ones im subscribed to. You couldn't have done your install any other way and it looks amazing!!! Looking forward to more content
I use .020 sheet from McMaster-Carr to reinforce my front lip. Trim to fit a 2.5" strip to fit the lower lip side to side. Give the metal the desired curvature. Bond to the lip using high strength epoxy. Clamp overnight to cure fully. Enjoy your new, wave free lip.
its so gooOOOD!!!!!! i dont run a front lip cause i made that my life. but this would do it. but will the sun warp it? maybe thicker? or thats what she said?
Sal Esposito Tape would make it bulge out more and more screws maybe if it was an actual stage rally car but it bounced right back to shape immediately as is👍🏼
Honestly I love be the idea... I wonder since I already have rokblocks mud flaps that would go good on my car. Only difference is I have the v5/v6 bumper instead. But just watching you and visualizing the possibilities I think I can do something similar with the same product. As long as they sell it at 88 inches I think I can make it work. And for your taping and measurement job I think that was a good way to do it... #buckyeah
More screws!!! I think you need to add a few more mounting points to it bro, seems to pull a little bit at the "corner" radius area on the bumper, which can put stress in the screw hole area on either side of the area where the gap is created. If you can picture what I'm trying to say, lol
I'm gonna be honest, I sought this video out and watched it for advice before going to Home Depot to buy some garden edging ... no clue if you'll take that as a compliment or not lol but I've only seen a couple GRs with lips like that in all of my internet searching, so I guess I'm about to produce GR with rally-style-lip #3 hahaha
I watch a "pool party" like last week and I swear those young dudes looked they don't know who Bucky is... Wtf, I'm not a vert guy but I wanna shred like this dude!
In Maine the Subaru's car sales place needs tell Subaru company to rhino line under neath cars and around outside wheel wells.. they used alot salt on roads during winter. Should be option to pick at dealers. To rhino line the cars and trucks here. Because everyone has rotten rusted cars here. Nothing worth to fix up uphere like your cars. My best friend Russell sylvia has a 69 Camaro sitting around in garage all the time. It's not rust bucket. It's a beautiful machine he built up. But most of it's time sitting in a garage
All the GCs rust from the inside out... no amount of underbody coating will fix that. Spent $15k getting all mine cut out and replaced with factory metal.
This is becoming my new favorite channel! I must say Bucky, you have one of the sickest Subaru collections!
Rad and thank you. I have some content of the other cars I’ll throw up here soon.
BuckYeah that Mini looks dope too. You should do an episode on that
Av. Nedelcu That’s my daughters boyfriend’s car.
This channel needs to blow up
Pattern transfer for the win. Great trick for the kids because they are the ones that will carry this sport into the next century. Looks great.
Dope! After seeing you hit the lip at the end I would definitely throw a couple more screws in there
But if you do that, won’t it be more rigid and flex less?
Also if you want to get rid of the waviness in the centre, double side tape some thin aluminium stems behind to keep the straightness.
Love the way it looks, I'd like to do this on my 99 RS. One note, I'd add an extra screw to each corner to help keep the material from dropping that much on heavy bumps. But definitely ordering one when they're available
I dig it. Such a simple add-on but completely transforms the front of the car. WRC Style boiis!
Awesome! Good choice on the textured side.
Very smart Bucky!
This front lip is exactly what I have been looking for! I need one!
That's rad Bucky! 😄 I legit did the garage door liner lip on the L bumper of my first GC. As a customer of Rokblokz having them on my forester and my f150 tow vehicle rally truck, I know these are going to be top quality! Bucky, if you're ever up here in Ont Canada we can do some good old bass fishing and play with my first gens. Get lippy in 2020🤙🤙
Kirk Blackadar Sounds awesome!
I used to have the garden edging on my Forester. Then I found a generic EBay Jetta lip that fit good. That's looks just fine,Buck!
Do you remember what model jetta lip you got mate
@@craigpriest2720 It was similar to this one. I bonded the joint together after fitting it. www.ebay.com/itm/2x-Front-Deep-Bumper-Chin-Spoiler-Lip-Valance-Splitter-Fit-VW-Golf-MK3-3-VR6/132637196020?fits=Model%3AJetta&epid=2281874652&hash=item1ee1cafef4:g:5fYAAOSwo9VbCPzZ
Looks fantastic. Maybe a little heat gun exposure will help work those waves out. That worked on my FRP front lip. That and sitting directly in the hot California sun will help too
Using the tape to know where the holes were gonna be was really smart. Thanks for the tip!
looks really good! and great idea with the tape and marking it for the hole placement
Brad Pittiful Thank you 👊🏼😉
Show us the blue subaru in the garage sometime! It's always hanging out in the background
Zak Working on an edit now👍🏼
BuckYeah sick 👌🏽👍🏽 you built that for your kid if I remember?
Alex MkvTurbo Yup, more like a restoration 👍🏼
I would 100% buy this!...Already have their flaps and love the material. I've been looking to do this but wasn't thrilled when I went to look at the stuff at Home Depot. Really hope they can hook this up for 08-14's!!!🙌
Niall Booker Rad, it’ll be available soon 💪🏼
Yes! Would love to see this as a product, along with those large "fender liner" sheets.
Came out perfect Bucky..looks killer!
Vincent Paterniti Thanks 👊🏼
Bucky, I have confidence in your abilities. I thought the the trick with the painter's tape was cool. And the new product looks pretty dope!!
Matt Pish Thanks, it took some thought but I’m super stoked on the final fit 👍🏼
Super sick. I would buy it.
Awesome! I'll buy one as soon as they are ready.
Some small washers, cupped slightly with rubber underside to go with the screws and I bet it would be even stronger
Sick idea! That material is solid for sure and looks great too. I like 👍😎
Awesome video. It looks good. Like your way of testing stuff.
John Cline Haha, go big!
The tape method is legit. I think I need men some that for my rallycross/hooptieX car. Way better than that home depot shit.
Loving the chillhop soundtrack. My favorite channel to turn on and relax.
Tastefully done sir car looks great
Awesome buck , let us know when we can start ordering them and i think ya need to add some more screws just to be on the safe side
watching bucky is the best way to start the day , buckyeah!
YES FINALLY! I've been looking for this! I even commented on one of your IG posts asking about the custom lip, so definitely interested for my GC8 build as well!
SageCraft Rad, I should know soon and the feed back has been awesome!
Dig it....my bumper is trashed so I was debating the home depot route, but I'll hold off in case this stuff gets made to the public.
I can’t believe this channel doesn’t have more subscribers.
Just bought me one for my channels car. So stoked
This is EXACTLY what I need for my SRT Vermont Sportscar front end conversion!
MoshpitMad 👍🏼😉
@Steve Gundrum MoshpitMad on IG.
Looks sick! Much more durable than the fibre glass 👌🏻🤗
Looks awesome! I need that on my Focus RS for max rally car look.
You can probably clear the ripple in it if you pull on the lip tight from one end when fitting it and use more screws or pop rivets. Use a screw/rivet say every 8-10cm. You can then smash out of that driveway without it almost pulling off the corner of the lip haha.
Monetization..Good for you bro ..On your way..
Looks good! paint the screws matte black so they blend in
Wolfy1091 Yup👍🏼
Editing, tips, tricks and dad jokes are really coming together.
Graham Drope Thanks👍🏼
My favorite channel out of all the ones im subscribed to. You couldn't have done your install any other way and it looks amazing!!! Looking forward to more content
Jeremy Schoppaul 👊🏼😉 Thanks for watching!
Buck it looks very good with that! Great shape
What hardware do you use? Self tapping screws? Bolts with a nut on the back?
Dude! Nice idea! I'm gonna do this, but with rivets and washers. And probably more holes. Skiiiirrrrt skiirrrrrrtttt hahaah
Nice Bucky I’ve bought myself EZ lip for my 2009 Subaru Impreza STI to get that look. Hopefully it’s going to be a universal.
I need this for my RS! I would buy it!
I used aluminum from our local race car supply shop...works well and has character the more is scrapes lol
I use .020 sheet from McMaster-Carr to reinforce my front lip.
Trim to fit a 2.5" strip to fit the lower lip side to side.
Give the metal the desired curvature.
Bond to the lip using high strength epoxy.
Clamp overnight to cure fully.
Enjoy your new, wave free lip.
BRO THE COLOR OF THE SUBARU🔥🔥😮💨 what’s the exact same so I can do mine plss???
Edit : THE BLUE ONE
Good job brother I actually thought you were going to use the old one as a template but you did good the way you did it love the videos brother
I would LOVE to be able to buy a pair of these for my S2000 and my '15 STI!
its so gooOOOD!!!!!! i dont run a front lip cause i made that my life. but this would do it. but will the sun warp it? maybe thicker? or thats what she said?
DET COR That test I did really worked it good and it was right back to normal by the time I drove it back around 👍🏼
I really love your channel making my GC8 build a way more easier!!!
Thanks for watching and stoked you dig the content 👊🏼
DUDE! meeting you today was so sick. You're a LEGEND
Andrew Landes Rad spot and good chatting 👍🏼
Spot on the rally lip can't wait to test it myself😏😁
Bucky is pretty much building my dream car...with mods like this one that I didn't even know I wanted.
💪🏼😉👍🏼
Love this series binge watched up to here all today. Have you done a video laying out the rough amount you've spent
I think it looks really good. You could maybe paint the screws if you don't like the contrast.
Jason Easley I agree, I’ll paint them black when the car is closer to being finished👍🏼
Looks good! I wonder if installing 3M double sided foam tape in addition to the screws would help secure it better... or maybe just some more screws.
Sal Esposito Tape would make it bulge out more and more screws maybe if it was an actual stage rally car but it bounced right back to shape immediately as is👍🏼
Fair enough
Yaaa buddy!! Add some more screws and you're golden 🤙
Depends how much it cost. The end was dope tho
You the man bucky 🤘
I'd love to look into ordering some for my 06 Legacy GT! Looks rad!!!
Haven't got the edging from Home Depot but I do have a set of RokBlokz for my STI.
That material would be great for my 03 forester!
Hell yeah dude. Been on/off poking around for something similar on my GR, this would be peeeerfect.
Honestly I love be the idea... I wonder since I already have rokblocks mud flaps that would go good on my car. Only difference is I have the v5/v6 bumper instead. But just watching you and visualizing the possibilities I think I can do something similar with the same product. As long as they sell it at 88 inches I think I can make it work. And for your taping and measurement job I think that was a good way to do it... #buckyeah
Chris Voulo It will have mounting bracket options for those without a smooth surface to mount to👍🏼
More screws!!! I think you need to add a few more mounting points to it bro, seems to pull a little bit at the "corner" radius area on the bumper, which can put stress in the screw hole area on either side of the area where the gap is created. If you can picture what I'm trying to say, lol
I'm gonna be honest, I sought this video out and watched it for advice before going to Home Depot to buy some garden edging ... no clue if you'll take that as a compliment or not lol but I've only seen a couple GRs with lips like that in all of my internet searching, so I guess I'm about to produce GR with rally-style-lip #3 hahaha
Yo, I absolutely love your videos! I saw you featured on hoonigan and have been a fan since!
I watch a "pool party" like last week and I swear those young dudes looked they don't know who Bucky is... Wtf, I'm not a vert guy but I wanna shred like this dude!
Looks great
I dig it and your style man. Love it.
I need this! Just awesome
Looking good!
Hawk Eye Thank you 🤙🏼
Hey Bucky, this is now available if you want to update your description! Just got it myself. Hopefully they do the fender liners soon too
Thanks for reminding me 👍🏼
@@BuckyLasekOfficial thanks for doing what you do!
You're a damb clever boy ! nice !
mike jones Thank you 🙏🏻❤️
Fuck yea!
Yes put this in my shopping cart!
Bucky, get a DeWalt heat gun and heat the lip.....it will straighten out! Top tip.
Love it! Widebodysubies approved..😀
Looks badass Bucky! Hell yea
Looks pretty rad to me! I bet that material lasts way longer
Sharpie screws Black 👌🏽😉
Looks great!!!!! Fucking SLAYERRRR!!!!!!
Going to order the lip !!
Maybe a couple more screws and some washers behind those screws and it would be a little more stout
Moliver Mella It bounced right back like a champ the way it is. That would poke it out and bulk up the clean look.
I need to do this to my evo 4. Great vid!
Love this channel. What is the premise behind this lip? Protection?
Hell yeahh dude keep these GC8 videos going, currently own one and a 2015 STI I’m a huge subie enthusiast and appreciate your uploads 🙏🏽
This is what I'm looking for, thank you bro
Great job Bucky. How much do these cost. Not sure it would look all that great on my 2011 wrx limited 🤷
🤣🤙"skrtskrrrttskrr" 🤙🤣👍 love it! 🍻
What's difference between ur blue and white subura builds? How bout a video comparing the two?
Is that the same stuff they put on the front of Trophy Trucks? Bet that takes a scrape alot better than an OEM front bumper cover!
In Maine the Subaru's car sales place needs tell Subaru company to rhino line under neath cars and around outside wheel wells.. they used alot salt on roads during winter. Should be option to pick at dealers. To rhino line the cars and trucks here. Because everyone has rotten rusted cars here. Nothing worth to fix up uphere like your cars. My best friend Russell sylvia has a 69 Camaro sitting around in garage all the time. It's not rust bucket. It's a beautiful machine he built up. But most of it's time sitting in a garage
All the GCs rust from the inside out... no amount of underbody coating will fix that. Spent $15k getting all mine cut out and replaced with factory metal.
I think it looks good 👍😀
ready for Jay Leno episode
Giancarlo Esposito Not yeeet 👊🏼😉
Gonna need that lip
I want to order this and I dont even have an impreza 😅
Rockys channel That’s all good, it’s not just for Impreza’s👍🏼
@@BuckyLasekOfficial I know its universal,but i want an Impreza 😃