Vorrei avere il pulsante D in modalità momentanea. Se premo quattro volte il pulsante sulla scheda, mi setta i canali A B in momentaneo e quelli C D in stabile(toggle), io vorrei il contrario, è possibile? I would like to have the D button in momentary mode. If I press the button on the card four times, I set channels A B in momentary and C D in stable (toggle), I would like the opposite, is it possible?
Ok.... Which reciewer with 4 relays i can only one or two or free keys from all four ? For example, i want manually set key 3 for relay 1, key 1 for relay 2, key 4 for relay 3 and key 4 for relay 2.
We strongly advice you to buy our remote control with our receiver. Our receiver can Only Work with 433Mhz coding with EV1527. Since I'm not sure what garage door remote control you are using, I really cannot guarantee it will work. Here is the link for further information for the receiver. www.aliexpress.com/store/product/DC-12V-10A-4channel-4relays-remote-control-switch-RF-wireless-remote-control-switch-433-92MHz-Toggle/2138259_32698314940.html?spm=2114.12010612.8148356.13.32751667dHqinh
You need a high-power remote control, you can reach the scope of your request. The remote control in the video is just an ordinary remote control, it can not meet your requirements.
Would this work for my garage door opener? But I'm worried about interference which is the reason I need to mod my garage door. I like the remotes because they can stay in the vehicle but should I use Wifi or Bluetooth ads the communication channel?
Yes, of cause it works for garage door opener. Many customer refit our product into it. You can check this video th-cam.com/video/jKkdHoNSuJk/w-d-xo.html . Actually the maximum distance can be 50 meters. Let me know if you have any problem!
Can you use multiple boards at the same time working independently and not have the remotes conflict with each other? Do the key codes have to be changed for each?
Hello, you could use different remote to control different receivers at the same time, they won't interface each other. Don't have to change the key codes. Thank you
I have the 4 channel 12v dc from transmitter and for the receiver I will use 12 v dc but can I connect a ac appliance such as tube light or fan. If yes how?
The voltage of the control relay is DC12V. But the output can be independent of the input, it can use the voltage range is 0V-250V, can be DC or AC. When its power comes from the control relay DC12V, the output is DC12V; if its power from the external input, then the input voltage output is the same voltage.
And how to use ONLY 2 keys, A, B on relays 1 and 2 from one remote control and ONLY 2 keys C and D for relays 3 and 4 from another remote control? Remote controls have 4 keys.
Ладно, реле работает само по себе по двум причинам. Одна из причин связана с пультом дистанционного управления: вам нужно восемь раз нажать кнопку обучения на приемнике, чтобы очистить код и повторно выполнить сопряжение пульта дистанционного управления. Одна из причин заключается в том, что, что касается печатной платы, проверьте, не касалась ли она водой или случайно не касалась ее. После устранения этих двух причин вы сможете решить проблему. В основном по первой причине вы можете попробовать подключить еще несколько пультов дистанционного управления. Не торопитесь при сопряжении, чтобы избежать помех со стороны других пультов дистанционного управления.
can you explain how to wire it? i saw a wiring diagram but it was showing that the switched connectors were all + and the negative was using the same ground as the 12v in for the board , what if i want to power the board with a 12v dc transformer but switch something on and off that has it's own separate power supply? for example i want to use the 2 power terminals V+ and V- to power this board with 12v but then i want to use 2 of the other 3 terminals(for the single relay single channel model) to switch something that has it's own power supply i do not want to use the same 12V power supply that is powering the board, i just want to get continuity between 2 of the other connectors that are not being used to power the board and not use the same groung that is being used to power the board
здравствуйте ворота открываются от некоторых соседских брелков сосед снимает или ставит на сигнализацию свою машину и у меня открывается ворота как это устранить?
It's great to hear from you and happy to solve your problem. It is recommended that you change the remote control and pair it again. Delete the original remote control and pair the new remote control. Hope it can solve your questions
Gracias me salvaste la vida
Allah razı olsun direnç .netten aldım ürünü program lama desteği veremediler tesadüf buldum videoyu çok faydalı oldu👍
can one remote function run 3 different functions ??
for example:
A button for self lock mode,
button B for inter lock mode
C button for jog mode.
yes, try programming pressing 4, 5 and more times the button on relay board
Hey mate can you explain how to set the romotes without them auto alowing new remotes
Is it possible to latch say 3 or 4 channel by pressing only one button , say 'A' ?
Vorrei avere il pulsante D in modalità momentanea. Se premo quattro volte il pulsante sulla scheda, mi setta i canali A B in momentaneo e quelli C D in stabile(toggle), io vorrei il contrario, è possibile?
I would like to have the D button in momentary mode. If I press the button on the card four times, I set channels A B in momentary and C D in stable (toggle), I would like the opposite, is it possible?
How many distance this remort work.i mean its range.plaese tell
About 50 meters in open area.
Ok.... Which reciewer with 4 relays i can only one or two or free keys from all four ?
For example, i want manually set key 3 for relay 1, key 1 for relay 2, key 4 for relay 3 and key 4 for relay 2.
yes, you can pair the remote control key with unlimited receivers, but you can only pair 20 remote controls with one receiver
If i press the button only the first press light up the led in the receiver
Would this receiver work with my car's garage door opener or only the supplied remote controls?
We strongly advice you to buy our remote control with our receiver. Our receiver can Only Work with 433Mhz coding with EV1527. Since I'm not sure what garage door remote control you are using, I really cannot guarantee it will work. Here is the link for further information for the receiver. www.aliexpress.com/store/product/DC-12V-10A-4channel-4relays-remote-control-switch-RF-wireless-remote-control-switch-433-92MHz-Toggle/2138259_32698314940.html?spm=2114.12010612.8148356.13.32751667dHqinh
Does the 12-volt battery work outside
can you tell me about its Max range!! i m in need of 500-600meters remote operation!!
You need a high-power remote control, you can reach the scope of your request.
The remote control in the video is just an ordinary remote control, it can not meet your requirements.
Would this work for my garage door opener? But I'm worried about interference which is the reason I need to mod my garage door. I like the remotes because they can stay in the vehicle but should I use Wifi or Bluetooth ads the communication channel?
Yes, of cause it works for garage door opener. Many customer refit our product into it. You can check this video th-cam.com/video/jKkdHoNSuJk/w-d-xo.html . Actually the maximum distance can be 50 meters. Let me know if you have any problem!
Can you use multiple boards at the same time working independently and not have the remotes conflict with each other? Do the key codes have to be changed for each?
Hello, you could use different remote to control different receivers at the same time, they won't interface each other. Don't have to change the key codes.
Thank you
@@qiachip what is the range inside the house...between rooms with doors open ?
ya recon one these wood run old 12 car starter motor used on a corsing drag lure
Hi! What kind of battery for the remote?
CR2032
What distance work?
What distante work?
I have the 4 channel 12v dc from transmitter and for the receiver I will use 12 v dc but can I connect a ac appliance such as tube light or fan. If yes how?
The voltage of the control relay is DC12V.
But the output can be independent of the input, it can use the voltage range is 0V-250V, can be DC or AC. When its power comes from the control relay DC12V, the output is DC12V; if its power from the external input, then the input voltage output is the same voltage.
If your receiver comes from me, then it can.
And how to use ONLY 2 keys, A, B on relays 1 and 2 from one remote control and ONLY 2 keys C and D for relays 3 and 4 from another remote control? Remote controls have 4 keys.
This receiver needs to match a remote with 4 buttons.
Подскажите пожалуйста бывает что реле срабатывает само по себе, что это может быть и как это устранить?
Ладно, реле работает само по себе по двум причинам.
Одна из причин связана с пультом дистанционного управления: вам нужно восемь раз нажать кнопку обучения на приемнике, чтобы очистить код и повторно выполнить сопряжение пульта дистанционного управления.
Одна из причин заключается в том, что, что касается печатной платы, проверьте, не касалась ли она водой или случайно не касалась ее.
После устранения этих двух причин вы сможете решить проблему. В основном по первой причине вы можете попробовать подключить еще несколько пультов дистанционного управления. Не торопитесь при сопряжении, чтобы избежать помех со стороны других пультов дистанционного управления.
Hi could you do a video on exactly where to solder an antenna wire onto a rf receiver board.
The receiver board already has an antenna and does not require additional solder.
just in case you wanted to add an external antenna for better range.
can you explain how to wire it?
i saw a wiring diagram but it was showing that the switched connectors were all + and the negative was using the same ground as the 12v in for the board , what if i want to power the board with a 12v dc transformer but switch something on and off that has it's own separate power supply? for example i want to use the 2 power terminals V+ and V- to power this board with 12v but then i want to use 2 of the other 3 terminals(for the single relay single channel model) to switch something that has it's own power supply i do not want to use the same 12V power supply that is powering the board, i just want to get continuity between 2 of the other connectors that are not being used to power the board and not use the same groung that is being used to power the board
@@andreamitchell4758
Hi Andrea, did you ever find the answer to this question, I have a similar dilemma.
Thanks
Ash from 🏴
3 modes only?
The product has 7 functional modes. The video only introduces 3 commonly used modes.
здравствуйте ворота открываются от некоторых соседских брелков сосед снимает или ставит на сигнализацию свою машину и у меня открывается ворота как это устранить?
It's great to hear from you and happy to solve your problem.
It is recommended that you change the remote control and pair it again. Delete the original remote control and pair the new remote control.
Hope it can solve your questions
at Momentary/Jog mode can press 2 button at same time
Hi, there would not be any reaction if you Press A and B at the same time.
hello, can 2 receivers learn 1 remote?
Hello, one remote controller can be connected with many receivers. 2 receivers learn 1 remote.
If i press eight times nothing happened..i dont know how to reset it.
Hi, can you give me the direct link where you purchased your receiver from?
Which is the decoder IC?
Hello EV 1527
Bhai ye connection samajh nahi aa rahe apana mobile no. de dijiye please urgent work
Can it work for DC motor
Yes, exactly working on DC 12V
単5電池かと思ったら違った